In this study, samples of 51CrV4 steel tempered at two different temperatures after annealing and oil cooling were examined. The changes in the morphology and mechanical properties of the samples processed at different temperatures were analyzed. The effects of tempering on wear resistance were discussed. Figure A. Schematic representation of experimental studies Purpose: The aim of the study is to discuss and compare the effects of different tempering temperatures on microstructure and mechanical properties. Theory and Methods: Samples of 51CrV4 steel were annealed at 970 °C and oil cooled. Then, they were tempered at 220 °C and 315 °C and examined. Microstructures and morphological changes of steel samples were examined using optical microscope, SEM-EDS and XRD. Changes in mechanical properties were examined by tensile, charpy impact and dry sand rubber wheel abrasion tests. Results: Results show that two different microstructures consisting of carbide sediments in the ferritic matrix and containing a bainitic structure were reached. No significant difference was observed in the hardness measurements taken from the section and the surface. However, as a result of the tensile, charpy impact, and dry sand rubber wheel abrasion tests, significant differences were observed between the sample groups and it was concluded that the most suitable tempering temperature was 315 °C. Conclusion: 51CrV4 steel were tempered at two different temperatures after annealing and oil cooling and examined in this study. The changes in the morphology and mechanical properties of the samples processed at different temperatures were analyzed and presented.
ÖZET: Toprak işleme makinaları sürüm işlemi yaparken, işleyici parçalar ile toprakta bulunan kuvars veya korundun gibi partiküller sürtünmektedir ve bu durum toprakta sürüm yapan işleyici tarım ekipmanlarında aşınmalara neden olmaktadır. Ülkemizde, bu ekipmanların mekanik özelliklerinin iyileştirilmesi ve aşınmaya karşı dirençlerini artırabilmek amacıyla uygulanan sertleştirme ısıl işlemleri gelişen teknikler ile birlikte değişmektedir. Yapılan çalışmada süneklik ve tokluk değerlerinin yüksek olduğu bilinen ve tarım aletlerinin belli bölümlerinde sıklıkla kullanılan 60SiMn5 alaşımına sertleştirme işleminden sonra farklı sıcaklıklarda (250 °C ve 270 °C) uygulanan menevişleme işlemlerinin mikroyapı ve mekanik özelliklerine etkileri incelenmiştir. Bu amaçla, 970 °C' de östenitleştirme ve ardından yağda soğutma işlemi uygulandıktan sonra farklı sıcaklıklarda menevişleme işlemi uygulanmıştır. Uygulanan menevişleme işlemlerinin mikroyapıya etkisi optik mikroskop ve SEM-EDX analizleri ile gerçekleştirilmiştir. Numunelerin sertlik, darbe ve kuru kum kauçuk aşınma testleri gerçekleştirilmiştir. Çalışmanın sonucunda 270 °C' de yapılan menevişleme işlemi ile numunede alt beynit yapısının daha homojen dağılmasının sağlaması sebebi ile malzemenin tokluk değerinde artış görülmüştür. Ayrıca uygulanan menevişleme işlemlerinin akma, çekme ve aşınma dayanımlarını arttırdığı ve mekanik özellikleri olumlu yönde etkilediği gözlemlenmiştir.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.