This study aims to examine the in uence of untreated coal waste (UCW) and treated coal waste (TCW) as supplementary cementitious materials (SCMs) on the environmental, mechanical, durability, and microstructural characteristics of mortar mixes. UCW preparation procedure consists of sequential steps of crushing and grinding. Afterward, UCW is thermally activated through incinerating at 750°C to be promoted to TCW. Experimental work includes mixing mortar mixtures by partially replacing cement with the coal waste binders (UCW and TCW) at different incorporation levels of 4, 8, 12, and 16% of cement weight. Toxicity characteristic leaching procedure (TCLP) test was applied to investigate the environmental impacts of coal wastes. TCLP test results pointed out that heavy metals including Manganese, Cadmium, Lead, and Chromium could successfully entrap in the cement matrix. The compressive and exural strengths as mechanical characteristics of mortar mixtures were determined at 3, 7, 28, 90, and 180 curing days. Moreover, the mortar specimens were immersed in 3% sulfuric acid (H 2 SO 4 ) for 60 and 150 days. Durability results showed that the H 2 SO 4 attack resistance of binary cement mortars containing 4% coal waste binders was better than the plain mortar. Based on the scanning electron microscopy (SEM) images, ettringite was found as the main hydration product of binary cement after 28 days; however, the existence of calcium silicate hydrate (CSH) and calcium hydroxide (Ca(OH) 2 ) in the cement matrix of mixes after 90 days explains the more compact microstructure attained by using coal waste as cement replacement materials compared to control mixtures.

No abstract

Incorporating phase change material (PCM) into paving materials can regulate the pavement temperature, improve the pavement durability, and mitigate the heat-island effects. In this research, porous fillers were used as the PCM carrier, and the thermal and rheological behaviors of the asphalt mastic with the PCM were evaluated. Two different carrier materials (diatomite and expanded perlite) and four types of PCMs were used in the study. The candidate filler, PCM, and proper blending ratios were determined based on the results of scanning electron microscope image analysis, the filter paper test, and the temperature sweep test. The thermal and rheological behaviors of the mastics with PCMs were further evaluated with different filler replacement ratios. Thermal analysis through a differential scanning calorimetry test, thermal conductivity and volumetric heat capacity test, and real-time temperature performance test were performed on the asphalt mastics. Rheological tests, including the complex shear modulus test, the bending beam rheometer test, and the linear amplitude sweep test, were also conducted. The modified mastics were found to have high heat capacity with the latent heat storage ability. The rheological analyses showed that with the addition of polyethylene glycol, while the low-temperature performance of the asphalt mastics was improved, the performance at intermediate and high temperatures was not adversely affected by the PCM.

This study aims to examine the influence of untreated coal waste (UCW) and treated coal waste (TCW) as supplementary cementitious materials (SCMs) on the environmental, mechanical, durability, and microstructural characteristics of mortar mixes. UCW preparation procedure consists of sequential steps of crushing and grinding. Afterward, UCW is thermally activated through incinerating at 750°C to be promoted to TCW. Experimental work includes mixing mortar mixtures by partially replacing cement with the coal waste binders (UCW and TCW) at different incorporation levels of 4, 8, 12, and 16% of cement weight. Toxicity characteristic leaching procedure (TCLP) test was applied to investigate the environmental impacts of coal wastes. TCLP test results pointed out that heavy metals including Manganese, Cadmium, Lead, and Chromium could successfully entrap in the cement matrix. The compressive and flexural strengths as mechanical characteristics of mortar mixtures were determined at 3, 7, 28, 90, and 180 curing days. Moreover, the mortar specimens were immersed in 3% sulfuric acid (H2SO4) for 60 and 150 days. Durability results showed that the H2SO4 attack resistance of binary cement mortars containing 4% coal waste binders was better than the plain mortar. Based on the scanning electron microscopy (SEM) images, ettringite was found as the main hydration product of binary cement after 28 days; however, the existence of calcium silicate hydrate (CSH) and calcium hydroxide (Ca(OH)2) in the cement matrix of mixes after 90 days explains the more compact microstructure attained by using coal waste as cement replacement materials compared to control mixtures.