No abstract

No abstract

Because traditional assessing methods usually yield extreme results and are of poor resolution, a set pair analysis based on triangular fuzzy number is established. Set pair analysis method is an uncertainty analysis method of the system whose formula structure analysis of connection degree is established by the identity degree, discrepancy degree and contrary degree to deal with all kinds of uncertainty and fuzzy problems. The measured value and the lake quality criteria are two interrelated sets put together to compose a set pair with respect to the problem of determination of the magnitude of lake eutrophication. The basic expression of the degree of couplet is extended at different levels and at the same level to form a multi-element connection number, in order to set up a five-element connection number in relation to I-V grades evaluation standard commonly used in lake assessment. The discrepancy degree is expanded into partial identity in discrepancy, entirety discrepancy and partial contrary in discrepancy, this forms a multivariate connection number of identity, partial identity in discrepancy, entirety discrepancy, partial contrary in discrepancy and contrary. By introducing triangular fuzzy number the number of links to get the evaluation grade for a confidence interval was obtained, weight value calculated by weighted average method and finally got the evaluation grade as a confidence interval based on confidence level. The case study shows that the method presents the evaluating grade as a confidence interval which has advantages of high resolution and information utilization.

In this study, the electrocatalysis method is used to degrade polyacrylamide (PAM) from wastewater. This method can degrade PAM rapidly and effectively, and it has no secondary pollution but has clean and environmental protection. The Box-Behnken design of response surfaces is used to optimize the PAM degradation experiment of wastewater. In accordance with the regression analysis results, the second-order polynomial fitting model is significant. The best conditions for the experiment are a current density of 58.8 mA/cm 2 , an electrode plate spacing of 3.07 cm, initial pH of the solution of 6.73 and reaction time of 2.225 h. The COD removal rate reaches 92.7%, and the predicted value is 92.24%. Therefore, electrocatalytic degradation of PAM has a good application prospect.

No abstract