Boron dipyrromethene (Bodipy) is one of the most extensively investigated organic chromophores. Most of the investigations are focused on the singlet excited state of Bodipy, such as fluorescence. In stark contrast, the study of the triplet excited state of Bodipy is limited, but it is an emerging area, since the triplet state of Bodipy is tremendously important for several areas, such as the fundamental photochemistry study, photodynamic therapy (PDT), photocatalysis and triplet-triplet annihilation (TTA) upconversion. The recent developments in the study of the production, modulation and application of the triplet excited state of Bodipy are discussed in this review article. The formation of the triplet state of Bodipy upon photoexcitation, via the well known approach such as the heavy atom effect (including I, Br, Ru, Ir, etc.), and the new methods, such as using a spin converter (e.g. C60), charge recombination, exciton coupling and the doubly substituted excited state, are summarized. All the Bodipy-based triplet photosensitizers show strong absorption of visible or near IR light and the long-lived triplet excited state, which are important for the application of the triplet excited state in PDT or photocatalysis. Moreover, the methods for switching (or modulation) of the triplet excited state of Bodipy were discussed, such as those based on the photo-induced electron transfer (PET), by controlling the competing Förster-resonance-energy-transfer (FRET), or the intermolecular charge transfer (ICT). Controlling the triplet excited state will give functional molecules such as activatable PDT reagents or molecular devices. It is worth noting that switching of the singlet excited state and the triplet state of Bodipy may follow different principles. Application of the triplet excited state of Bodipy in PDT, hydrogen (H2) production, photoredox catalytic organic reactions and TTA upconversion were discussed. The challenges and the opportunities in these areas were briefly discussed.

We report molecular designing strategies to enhance the effective visible-light absorption of cyclometalated Ir(III) complexes. Cationic cyclometalated Ir(III) complexes were prepared in which boron-dipyrromethene (Bodipy) units were attached to the 2,2'-bipyridine (bpy) ligand via -C≡C- bonds at either the meso-phenyl (Ir-2) or 2 position of the π core of Bodipy (Ir-3). For the first time the effect of π conjugating (Ir-3) or tethering (Ir-2) of a light-harvesting chromophore to the coordination center on the photophysical properties was compared in detail. Ir(ppy)2(bpy) (Ir-1; ppy = 2-phenylpyridine) was used as model complex, which gives the typical weak absorption in visible range (ε < 4790 M(-1) cm(-1) in region > 400 nm). Ir-2 and Ir-3 showed much stronger absorption in the visible range (ε = 71,400 M(-1) cm(-1) at 499 nm and 83,000 M(-1) cm(-1) at 527 nm, respectively). Room-temperature phosphorescence was only observed for Ir-1 (λ(em) = 590 nm) and Ir-3 (λ(em) = 742 nm). Ir-3 gives RT phosphorescence of the Bodipy unit. On the basis of the 77 K emission spectra, nanosecond transient absorption spectra, and spin density analysis, we proposed that Bodipy-localized long-lived triplet excited states were populated for Ir-2 (τT = 23.7 μs) and Ir-3 (87.2 μs). Ir-1 gives a much shorter triplet-state lifetime (0.35 μs). Complexes were used as singlet oxygen ((1)O2) photosensitizers in photooxidation. The (1)O2 quantum yield of Ir-3 (ΦΔ = 0.97) is ca. 2-fold of Ir-2 (ΦΔ = 0.52). Complexes were also used as triplet photosensitizer for TTA upconversion; upconversion quantum yields of 1.2% and 2.8% were observed for Ir-2 and Ir-3, respectively. Our results proved that the strong absorption of visible light of Ir-2 failed to enhance production of a triplet excited state. These results are useful for designing transition metal complexes that show effective strong visible-light absorption and long-lived triplet excited states, which can be used as ideal triplet photosensitizers in photocatalysis and TTA upconversion.

It is well-known that the fluorescence of a chromophore can be efficiently quenched by the free rotor effect, sometimes called intramolecular rotation (IMR), i.e. by a large-amplitude torsional motion. Using this effect, aggregation induced enhanced emission (AIE) and fluorescent molecular probes for viscosity measurements have been devised. However, the rotor effect on triplet excited states was rarely studied. Herein, with molecular rotors of Bodipy and diiodoBodipy, and by using steady state and timeresolved transient absorption/emission spectroscopies, we confirmed that the triplet excited state of the Bodipy chromophore is not quenched by IMR. This is in stark contrast to the fluorescence (singlet excited state), which is significantly quenched by IMR. This result is rather interesting since a long-lived excited state (triplet, 276 μs) is not quenched by the IMR, but the short-lived excited state (singlet, 3.8 ns) is quenched by the same IMR. The unquenched triplet excited state of the Bodipy was used for triplet−triplet annihilation upconversion, and the upconversion quantum yield is 6.3%.

Perylenebisimide (PBI) was used to prepare C^N cyclometalated Ir(III) complexes that show strong absorption of visible light and it is the first time the long-lived triplet excited state of PBI chromophore was observed in a transition metal complex (τT = 22.3 μs). Previously, the lifetime of the triplet state of PBI in transition metal complexes was usually shorter than 1.0 μs. Long-lived triplet excited states are useful for applications in photocatalysis or other photophysical processes concerning triplet-triplet-energy-transfer. PBI and amino-PBI were used for preparation of cyclometalated Ir(III) complexes (Ir-2 and Ir-3), in which the PBI chromophore was connected to the coordination center via C≡C π-conjugation bond. The new complexes show strong absorption in visible region (ε = 34,200 M(-1) cm(-1) at 541 nm for Ir-2, and ε = 19,000 at 669 nm for Ir-3), compared to the model complex Ir(ppy)(bpy)[PF6] Ir-1 (ε < 5000 M(-1) cm(-1) in the region beyond 400 nm). The nanosecond time-resolved transient absorption and DFT calculations indicated that PBI-localized long-lived (3)IL states were populated for Ir-2 and Ir-3 upon photoexcitation. The complexes were used as triplet photosensitizers for (1)O2-mediated photooxidation of 1,5-dihydronaphthalene to produce juglone, an important intermediate for preparation of anti-cancer compounds. (1)O2 quantum yields (Φ(Δ)) up to 91% were observed for the new Ir(III) complexes and the overall photosensitizing ability is much higher than the conventional Ir(III) complex Ir-1, which shows the typical weak visible light absorption in visible region. Our results are useful for preparation of transition metal complexes that show strong absorption of visible light and long-lived triplet excited state and for the application of these complexes in photocatalysis.

Pt(II) dbbpy bisacetylide (dbbpy = 4,4'-di(tert-butyl)-2,2'-bipyridine) complex (Pt-1) with two different Bodipy ligands was prepared with the goal to attain broad-band visible light absorbing, efficient funneling of the photoexcitation energy (via resonance energy transfer, RET) to the energy acceptor and high triplet formation quantum yields. Construction of the above-mentioned molecular structural motif is challenging because two different arylacetylide ligands are incorporated in the complex; normally two homoleptic acetylide ligands were used for this kind of N(∧)N Pt(II) complexes. A reference complex with trans bis(tributylphosphine) Pt(II) bisacetylide protocol (Pt-4) was prepared for comparison of the photophysical properties. The two different Bodipy ligands in Pt-1 and Pt-4 constitute singlet/triplet energy donor/acceptor, as a result the harvested photoexcitation energy can be funneled to the triplet state confined on one of the two Bodipy ligands. The photophysical properties of the complexes were studied with steady state UV-vis absorption and luminescence spectroscopies, femto- and nanosecond transient absorption spectroscopies, cyclic voltammetry, as well as DFT/TDDFT calculations. Fluorescence/phosphorescence dual emission were observed for the complex. The ultrafast intramolecular singlet/triplet energy transfer in Pt-1 was confirmed by the transient absorption spectroscopy (kFRET = 2.6 × 10(11) s(-1), ΦFRET = 87.1%) followed by an intersystem crossing (kISC = 1.9 × 10(10) s(-1)), and the triplet state lifetime (τT) is 54.1 μs. The reference complex Pt-4 shows drastically different kinetics with kFRET = 6.9 × 10(10) s(-1), ΦFRET = 81.0%, kISC = 5.83 × 10(9) s(-1), and τT = 147.9 μs. Different singlet oxygen ((1)O2) quantum yields (ΦΔ = 75% and 70%) and triplet state quantum yields (ΦT = 91% and 69%, respectively) were observed for complexes Pt-1 and Pt-4.

This is a critical review of the advances in the molecular design of organic electroactive molecules, which are the key components for redox flow batteries (RFBs). As a large-scale energy storage system with great potential, the redox flow battery has been attracting increasing attention in the last few decades. The redox molecules, which bridge the interconversion between chemical energy and electric energy for RFBs, have generated wide interest in many fields such as energy storage, functional materials, and synthetic chemistry. The most widely used electroactive molecules are inorganic metal ions, most of which are scarce and expensive, hindering the broad deployment of RFBs. Thus, there is an urgent motivation to exploit novel cost-effective electroactive molecules for the commercialization of RFBs. RFBs based on organic electroactive molecules such as quinones and nitroxide radical derivatives have been studied and have been a hot topic of research due to their inherent merits in the last decade. However, few comprehensive summaries regarding the molecular design of organic electroactive molecules have been published. Herein, the latest progress and challenges of organic electroactive molecules in both non-aqueous and aqueous RFBs are reviewed, and future perspectives are put forward for further developments of RFBs as well as other electrochemical energy storage systems.

With good operation flexibility and scalability, vanadium redox‐flow batteries (VRBs) stand out from various electrochemical energy storage (EES) technologies. However, traditional electrodes in VRBs, such as carbon and graphite felt with low electrochemical activities, impede the interfacial charge transfer processes and generate considerable overpotential loss, which significantly decrease the energy and voltage efficiencies of VRBs. Herein, by using a facile electrodeposition technique, Prussian blue/carbon felt (PB/CF) composite electrodes with high electrochemical activity for VRBs are successfully fabricated. The PB/CF electrode exhibits excellent electrochemical activity toward VO2+/VO2+ redox couple in VRB with an average cell voltage efficiency (VE) of 90% and an energy efficiency (EE) of 88% at 100 mA cm−2. In addition, due to the uniformly distributed PB particles that are strongly bound to the surface of carbon fibers in CF, VRBs with the PB/CF electrodes show much better long‐term stabilities compared with the pristine CF‐based battery due to the redox‐mediated catalysis. A VRB stack consisting of three single cells (16 cm2) is also constructed to assess the reliability of the redox‐mediated PB/CF electrodes for large‐scale application. The facile technique for the high‐performance electrode with redox‐mediated reaction is expected to shed new light on commercial electrode design for VRBs.

No abstract