Solving the problem of the low temperature and low salt resistances of conventional polyacrylamide and the high cost of functional monomers, and thus, introducing it to the interlayer space provided by a layered structure for polymer modification, is a promising option. In this study, montmorillonite was used as the inorganic clay mineral, and an intercalated polyacrylamide/clay nanocomposite was synthesized via in situ intercalation polymerization. The optimal synthesis conditions were a clay content of 10.7%, preparation temperature of 11 °C, initiator concentration of 2.5 × 10−4 mol/L, and chain extender concentration of 5%. The IR results showed that the polymer was successfully introduced to the nanocomposite. The synthesized intercalated polyacrylamide/clay nanocomposite exhibited a better thickening effect, good viscoelasticity, and better salt resistance and thermal stability than polyacrylamide. In addition, the thickening capacity and thermal stability were superior to the salt-resistant polymer, with a 16.0% higher thickening viscosity and a 15.1% higher viscosity retention rate at 85 °C for 60 d. The intercalated polyacrylamide/clay nanocomposite further expanded the application of polyacrylamide in petroleum exploitation.
Cyclic gas injection has been proven to be an effective enhanced oil recovery (EOR) technique for tight oil reservoirs. During such processes, we expect recovery mechanisms such as oil swelling, oil viscosity reduction, vaporization, and pressure support, which highly relies on the successful conformance control of the injected gas. In this work, we present the numerical simulation study of using foam for improving the conformance control of cyclic gas injection in tight oil reservoir. We focus on improving two categories of conformance control problems using foam, making the injection profile for single well more evenly distributed and mitigating the gas breakthrough to adjacent wells through the connected hydraulic fractures in a multiwell setting. The simulation results show that foam has shown major impact in improving the gas conformance control in both cases. Typical recovery factor improvements are estimated to be up to 1% for lean gas injection in this tight oil reservoir. In conclusion, we have demonstrated the great potential of using foam to improve the conformance in tight oil cyclic gas injection process.
This paper developed a new methodology for rate transient analysis of fractured wells in carbonate reservoirs. Both the heterogeneity and dual-permeability flow behavior are incorporated into the proposed model, and the fractured carbonate reservoir was simulated with a two-zone composite model. In each zone, a traditional dual-porosity model was applied to describe the characteristics of the natural fractures and matrix. With the Laplace transform, we derived the solution of the mathematical model and plotted new type curves for transient rate decline analysis. Then, the flow regimes were divided and analyzed based on the new type curves. The influences of several critical parameters on transient rate response were also examined. A field case was studied further to demonstrate the precision and application of the proposed method. The results show that the new type curves are mainly composed of eight flow stages. The difference in physical properties (k 2,1 , η 2,1 ) between the two zones significantly impacts the transition and boundary-dominated flow regimes. When the values of k 2,1 and η 2,1 are smaller, the derivative curve of the transition flow stage will move down, and the duration of this stage on the derivative curve is longer, while the duration of the boundary dominant flow stage will decrease. The dimensionless radial radius of the inner zone (r 1D ) can significantly influence the transition flow regime. When r 1D is larger, the production rate and its derivative curve of the transition flow stage will move up, and the duration of this stage will be longer. The results also show that the proposed methodology can effectively fit the field production data. This method can be applied in well productivity evaluation for fractured carbonate reservoirs.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.