No abstract

The antenna presented in this study is a compact wideband monopole with wideband circular polarization that can be used across the whole antenna bandwidth. A rectangular C-shaped patch is partially covered by a ground plane in the proposed planar monopole antenna. Inserting a rectangular stub to the ground plane, etching a slit at the antenna patch, and adding a semicircular stub at the top of the antenna feed line increase the antenna impedance bandwidth (BW) and axial ratio bandwidth (ARBW). An FR4 substrate with overall dimensions of 25 mm×25 mm×1.6 mm is used to create the antenna. The antenna's observed impedance BW is 70% (4.55 GHz in the 4.3-8.85 GHz band), while the measured broadside ARBW is improved to a value of 82.2 percent (5.3 GHz along the range 3.8-9.1 GHz). The impedance BW is perfectly covered by the ARBW; hence the antenna can be considered circularly polarized throughout its operational spectrum. Within the antenna BW, the measured gain is greater than 1.5 dB.

This paper presents the design and implementation of a printed circuit microwave band-pass filter for 5G mid-band applications, using a Stub Loaded Multiple Mode Resonator (SL-MMR) technique. The objective of this article is to introduce a low-cost microstrip filter with improved passband and stopband characteristics, based on a mathematical analysis of stub loaded resonators. The filter cost is reduced by selecting the low-cost FR4 dielectric material as a substrate for the proposed filter. Based on the transmission line model of the filter, mathematical expressions are derived to predict the odd-mode and the even-mode resonant frequencies of the SL-MMR. The mathematical model also highlights the capability of controlling the position of the SL-MMR resonant frequencies, so that the 5G sub-band that extends along the range (3.7–4.2 GHz) can perfectly be covered with almost a flat passband. At the resonance frequency, a fractional bandwidth of 12.8% (500 MHz impedance bandwidth) has been obtained with a return loss of more than 18 dB and an insertion loss of less than 2.5 dB over the targeted bandwidth. Furthermore, a pair of parasitic elements is attached to the proposed filter to create an additional transmission zero in the lower stopband of the filter to enhance the suppression of the filter stopband. The measured and simulation results are well agreed, and both reveal the acceptable performance of the stopband and passband characteristics of the filter.

In this paper, single-element and MIMO microstrip antenna with two pairs of unequal slits is proposed as a circularly polarized antenna with negligible back radiation for 5G mid-band handsets. The unequal pairs of slits are engraved on the antenna patch to guarantee the presence of the circular polarization (CP). The proximity-coupled feeding technique is used to excite the proposed microstrip antenna in order to provide larger antenna −10 dB bandwidth which approaches 10.8% (3.48–3.87 GHz). A novel analysis technique is proposed in this paper that demonstrates the 3D axial ratio pattern in order to generate CP in the broadside direction without affecting the structure of the ground plane which ensures weak back radiation. The 3 dB axial ratio bandwidth (ARBW) is found to be equal to 4.1% extended along the range (3.58–3.73 GHz). To make the design more compatible with the 5G mid-band handsets, the 2 × 2 MIMO structure of the proposed antenna with reduced mutual coupling (less than −20 dB) is also presented in this work. The simulation and measured results are in good agreement, and both verify the CP characteristics and the weak back radiation of the proposed antenna.

No abstract