Metal matrix composites are an essential product used in engineering materials. This product has wide applications in automotive, aerospace, and other uses because of their lower density, good specific strength, best machinability, and better mechanical properties compared to Al 6063 alloy. In this paper, four different reinforced such as (MA), (MCA), (NFC) and (SA) with a constant rate of 5 wt.% for each reinforced element used and mixed with Al 6063 alloy as a metal matrix composite by using modified two-step mechanical stirrer and having three blades at each step. Coated carbide tool insert was carrying out the turning process. Surface roughness measured after turning of every change in cutting speed. Average chip length and its shape style formation performed within cutting speeds of 10 and 90 m/min, which appears in different length and shapes. Mechanical properties, damping characteristics, and wear loss improved dramatically by adding all reinforced composites to the base Al 6063 alloys. As the results of experiments, the surface roughness decreased by adding all four types of reinforcements. The mechanical properties, wear loss and damping characteristics improved by the constituents of all kinds of reinforcements and also by mixing of all types of constituents together. The effects of MA and NFC are more compared to MCA and SA for improving all conditions of experimental results. Microstructure observation produces compact grain boundaries with strong grains of metal matrix composites compared to Al 6063 alloys.
In the present study, the individual and combined effect of reinforcement on aluminum (Al; 6063) alloy is discussed. These Al metal matrix composites with individual and multiple reinforcements are finding increased application in aerospace, automobile industry, underwater machines, and transportation application, due to improved mechanical and tribological properties like strong, stiff, wear, and impact resistance. Al 6063 alloy reinforced with different elements such as two types of ceramic mortar ash (MA) and nanofibrillated composite (NFC), industrial waste met coke ash (MCA), and agro waste straw ash with the constant rate of 5 wt% for each reinforced element. The results show a significant effect on the mechanical properties such as tensile strength and hardness. Damping characteristic improved by mixing of MA and NFC together and the results shown that the damping characteristics can be good for MCA reinforcement. Logarithmic decrement slowly increased by adding all types of reinforced metal together. NFC has high resistance to wear loss followed by MA and MCA but for mixing all types of reinforcements together resulted in good improvement in wear loss. Microstructure analysis of Al matrix composites is the small grain size and uniform distribution with good particulate matrix interface bonding.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.