Composite laminates subjected to low-velocity impact events on the through-thickness direction are conveniently studied and disseminated in the open literature. However, in terms of laminate cylindrical shells this subject is less common. Therefore, the main goal of the present work is to study the impact response of laminate composite cylindrical shells composed by different type of fibres. For this purpose, laminates with different configurations (6C, 2C+2K+2C and 2C+2G+2C), where the "number" represents the number of layers used and C=Carbon, K=Kevlar and G=Glass fibre layers, were analysed in terms of static and impact strength. It is possible to conclude that both static and impact performance are strongly influenced by the shells' configuration. In terms of compressive static strength, the Kevlar hybrid shells present values 53.2% higher than the 6C shells, while the glass hybrid shells present values 17.3% lower. The impact analyses shows, regardless the similarity of the maximum loads for all configurations, that Kevlar hybrid shells achieved the highest elastic recuperation and the glass hybrid shells the maximum displacement.
Nowadays, due to the complexity and design of many advanced structures, cylindrical shells are starting to have numerous applications. Therefore, the main goal of this work is to study the effect of thickness and the benefits of a carbon composite sandwich cylindrical shell incorporating a cork core, compared to a conventional carbon composite cylindrical shell, in terms of the static and impact performances. For this purpose, static and impact tests were carried out with the samples freely supported on curved edges, while straight edges were bi-supported. A significant effect of the thickness on static properties and impact performance was observed. Compared to thinner shells, the failure load on the static tests increased by 237.9% and stiffness by 217.2% for thicker shells, while the restored energy obtained from the impact tests abruptly increased due to the collapse that occurred for the thinner ones. Regarding the sandwich shells, the incorporation of a cork core proved to be beneficial because it promoted an increase in the restored energy of around 44.8% relative to the conventional composite shell. Finally, when a carbon skin is replaced by a Kevlar one (hybridization effect), an improvement in the restored energy of about 20.8% was found. Therefore, it is possible to conclude that numerous industrial applications can benefit from cylindrical sandwiches incorporating cork, and their hybridization with Kevlar fibres should be especially considered when they are subject to impact loads. This optimized lay-up is suggested because Kevlar fibres fail through a series of small fibril failures, while carbon fibres exhibit a brittle collapse.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.