Shaping ceramics into complex and intricate geometries using cost-effective processes is desirable in many applications but still remains an open challenge. Inspired by plant seed dispersal units that self-fold on differential swelling, we demonstrate that self-shaping can be implemented in ceramics by programming the material's microstructure to undergo local anisotropic shrinkage during heat treatment. Such microstructural design is achieved by magnetically aligning functionalized ceramic platelets in a liquid ceramic suspension, subsequently consolidated through an established enzyme-catalysed reaction. By fabricating alumina compacts exhibiting bio-inspired bilayer architectures, we achieve deliberate control over shape change during the sintering step. Bending, twisting or combinations of these two basic movements can be successfully programmed to obtain a myriad of complex shapes. The simplicity and the universality of such a bottom-up shaping method makes it attractive for applications that would benefit from low-waste ceramic fabrication, temperature-resistant interlocking structures or unusual geometries not accessible using conventional top–down manufacturing.

Structural color is frequently exploited by living organisms for biological functions and has also been translated into synthetic materials as a more durable and less hazardous alternative to conventional pigments. Additive manufacturing approaches were recently exploited for the fabrication of exquisite photonic objects, but the angle-dependence observed limits a broader application of structural color in synthetic systems. Here, we propose a manufacturing platform for the 3D printing of complex-shaped objects that display isotropic structural color generated from photonic colloidal glasses. Structurally colored objects are printed from aqueous colloidal inks containing monodisperse silica particles, carbon black, and a gel-forming copolymer. Rheology and Small-Angle-X-Ray-Scattering measurements are performed to identify the processing conditions leading to printed objects with tunable structural colors. Multimaterial printing is eventually used to create complex-shaped objects with multiple structural colors using silica and carbon as abundant and sustainable building blocks.

Electrodes for metal-ion batteries should combine high specific capacity with fast cycling-rate capability. Although the use of mesoporous particles is an attractive approach to reconciling these contradicting performance parameters, synthetic protocols to create such particles are typically time-consuming, require environmentally unfriendly chemistries, and are limited to small batches. We present a simple and scalable processing route to synthesizing mesoporous TiO 2 particles through freezing, drying, and grinding of gelled aqueous suspensions of 5-nm-sized TiO 2 nanoparticles. Freezing enables partial densification of the nanoparticle network present in the initial gel, thus leading to mesoporous particles combining high density with easily accessible specific surface area for metal-ion insertion. The resulting mesoporous particles can be assembled into hierarchical porous anodes that exhibit superior volumetric capacity in comparison to xerogel and aerogel reference compositions. The aqueous-based nature and simplicity of the freezing process makes this synthetic approach a promising route for the fabrication of architectured electrodes for the next generation of metal-ion batteries.

Synthesis, processing, and characterization are reported for a series of tetracyanoplatinate Magnus' salt (TCN-MS) derivativessoluble derivatives of the generally intractable Magnus' green saltthat feature the general structure [Pt(NH 2 R) 4 ][Pt(CN) 4 ] where R is a branched alkyl group or a ω-phenylalkyl group. In solutions, these coordination compounds generally dissolve on the level of individual ion pairs as shown by X-ray diffraction analysis. To enable the formation of quasi-one-dimensional linear stacks of Pt(II) atoms in thin films, the matrix-assisted assembly is employed, whereby the compounds are codissolved with poly(ethylene oxide) (PEO), followed by film casting, thermally activated assembly, and eventual removal of PEO. Remarkably, assembled TCN-MS inorganic polymers exhibit bright blue-green photoluminescence. A detailed investigation of the assembly process and simultaneously modified solid-state optical properties is performed using a range of microscopy, optical and vibrational spectroscopy, and thermal analysis techniques. Given their unusual combination of optical properties, namely, transparency in the visible region, high photoluminescence quantum efficiencies (up to 13% in first-demonstration samples), and large Stokes shifts (up to 1 eV), TCN-MS derivatives are proposed as a promising class of light-emitting materials for emerging applications in molecular optoelectronics, the potential and challenges of which are discussed.

Structural color is frequently exploited by living organisms for biological functions and has also been translated into synthetic materials as a more durable and less hazardous alternative to conventional pigments. Additive manufacturing approaches were recently exploited for the fabrication of exquisite photonic objects, but the angle-dependence observed limits a broader application of structural color in synthetic systems. Here, we propose a manufacturing platform for the 3D printing of complex-shaped objects that display isotropic structural color generated from photonic colloidal glasses. Structurally colored objects are printed from aqueous colloidal inks containing monodisperse silica particles, carbon black and a gel-forming copolymer. Rheology and Small-Angle-X-Ray-Scattering measurements are performed to identify the processing conditions leading to printed objects with tunable structural colors. Multimaterial printing is eventually used to create complex-shaped objects with multiple structural colors using silica and carbon as abundant and sustainable building blocks.