No abstract

Waste heat recovery via Organic Rankine Cycle (ORC)-based power units represents one of the most promising solutions to counteract the effects of CO2 emissions on climate change. Nevertheless, several aspects are still limiting its development on the on-the-road transportation sector. Among these aspects, the significant variations of the conditions of the hot source (exhaust gases) are a crucial point. Therefore, the components of the ORC-based unit operate far from the design point if the main operating parameters of the plant are not suitably controlled. The maximum pressure of the cycle is one of the most important variables to be controlled for the importance it has on the effectiveness of the recovery and on safety of operation. In this paper, a wide experimental and theoretical activity was performed in order to define the operating parameters that mostly affect the maximum pressure of the recovery unit. The results showed that the mass flow rate provided by the pump and the expander volumetric efficiency were the main drivers that affect the plant maximum pressure. Subsequently, through a validated model of the expander, a diagnostic map was outlined to evaluate if the expander and, consequently, the whole plant were properly working.

No abstract

The main driver of research in the road transportation sector is almost certainly the development of technologies which allow for the reduction of CO2 emissions from internal combustion engines (ICEs). Wasted heat recovery (WHR) from the exhaust gases of ICEs based on organic rankine cycle (ORC) power units is one of the most promising technological solutions. However, several issues are raised when the recovery unit is scaled down to small applications, not to mention the fact that thermal sources are characterized by their intrinsically transient nature, as is the case with ICEs. In fact, this leads the ORC unit having to work frequently in off-design conditions. To successfully overcome this issue, the proper design and selection of the expanders are crucial. They are generally chosen from volumetric-type machines, thanks to their capacity to deal with time-varying thermo-fluid dynamic inlet properties. Among them, scroll machines represent one of the best solutions, despite them not yet being optimized as expanders, with them having been studied more as compressors. Dual-intake-port (DIP) technology is a novel solution used to enhance the performance of scroll machines. The effectiveness of this technology was assessed thanks to a comprehensive, experimentally-validated theoretical model of the scroll. It demonstrated that DIP technology can produce a 25% increase in mechanical power with respect to the baseline machine, without modifying the in–out pressure ratio. Maintaining a constant pressure difference across the expander at 5.6 bar, the power grew from 1131 W to 1410 W with the adoption of DIP technology. This power boost is lower than that achieved with a comparable DIP sliding rotary vane expander (SVRE) already studied by the authors, but the DIP Scroll achieved a higher efficiency (50–60%) when compared to the DIP SVRE case (40%).

No abstract

No abstract

No abstract

No abstract