O segmento da indústria cerâmica no Brasil está vinculado ao setor da construção civil, com uma participação estimada do PIB nacional em 1%. No Ceará, por exemplo, o segmento da indústria cerâmica encontra-se em um processo de reestruturação. Nesse viés, o presente trabalho apresenta um estudo de caso de eficiência energética referente a parte elétrica em uma indústria cerâmica de pequeno porte localizada na cidade de Russas-CE. O objetivo é estudar a viabilidade da implementação de algumas medidas de eficiência energética no âmbito da presente indústria, bem como analisar a possibilidade da mudança do grupo tarifário B3 para o grupo A4 e, posteriormente, averiguar os impactos econômicos concernentes a tais transmutações. Com o desenvolvimento do vigente estudo, observou-se que simples ações concernentes à eficiência energética, tais como possíveis rodízios e substituições dos motores elétricos da indústria cerâmica, podem proporcionar melhorias significativas em todo processo produtivo, expressando uma economia no consumo mensal de energia elétrica de aproximadamente 3.200 kWh. Ademais, conclui-se que a mudança do grupo tarifário B3 para o grupo A4, inserido na modalidade tarifária Horo Sazonal Verde, é vantajosa para a indústria, tendo em vista que a mesma estaria economizando cerca de R$ 16.000,00 em três meses de consumo.
A irradiação solar no Brasil tem valores bastante expressivos anualmente, e no que se refere ao território brasileiro, este recurso é responsável por atingir elevados números na geração de energia através da radiação solar em quase todo o ano, como acontece, por exemplo, na região Nordeste. Nesse sentido, este cenário favorável tem motivado a disseminação de diversas tecnologias utilizando a energia solar, assim como pesquisas relacionadas à utilização de diversos equipamentos, como o fogão solar para cocção de alimentos. Diante do exposto, o presente trabalho tem como objetivo desenvolver um fogão solar do tipo elíptico móvel, que configura-se como uma tecnologia alternativa para otimizar o processo de cocção de alimentos. Dessa maneira, com o intuito de verificar o desempenho do protótipo confeccionado, realizou-se o cozimento dos alimentos arroz, batata-doce, ovo e feijão. Aliado a isso, analisou-se os dados concernentes aos valores de temperatura, a irradiância solar e o tempo de cozimento durante o processo de cocção. Mediante o desenvolvimento deste trabalho, percebeu-se que os ajustes realizados da posição focal no decorrer dos ensaios proporcionaram ganhos significativos, denotando que o presente protótipo se apresenta como uma tecnologia alternativa útil para otimizar o processo de cocção de alimentos.
Uma das maneiras modernas de conter a expansão do consumo sem comprometer o desenvolvimento econômico é o estímulo do uso eficiente de energia. Dessa forma, a Agência Nacional de Energia Elétrica – ANEEL estabeleceu uma nova modalidade tarifária denominada Tarifa Branca que visa incentivar a redução do consumo de energia em horários de maior demanda. Entretanto, para que se torne viável ao consumidor, é necessário que haja deslocamento de carga para o período de menor demanda, já que neste horário, o valor da tarifa será menor. Sendo assim, o presente artigo tem como objetivo analisar o impacto técnico e econômico da aplicação de técnicas de Gerenciamento pelo Lado da Demanda (GLD) considerando a implementação da tarifa branca e a substituição do chuveiro elétrico por um sistema de aquecedor solar de água (SAS) em uma unidade residencial de baixa tensão. As técnicas de GLD aplicadas foram: deslocamento de carga e redução de pico. Para analisar a viabilidade da tarifa branca foram realizadas simulações no software HOMER PRO. Os resultados obtidos mostraram que a combinação das estratégias de GLD com a substituição do chuveiro elétrico pelo SAS viabilizam o uso da tarifa branca já que reduzem o custo de energia da unidade consumidora.
Um dos principais gastos de um país é o consumo de energia elétrica, portanto reduzir de forma eficiente a energia elétrica é uma das alternativas almejadas. A iluminação, por exemplo, requer uma alta demanda de energia elétrica, utilizar de uma iluminação eficiente é uma forma de reduzir os custos de uma edificação. Estima-se que em 2018, cerca de 7% de toda a energia produzida no Brasil foi consumida pelo poder público, e o consumo através da iluminação equivale a aproximadamente 1/3 de uma edificação. Neste contexto, o presente trabalho avaliou o impacto da inserção e troca das lâmpadas fluorescentes tubulares por lâmpadas do tipo LED na Universidade Federal Rural do Semiárido em Mossoró-RN. O trabalho foi desenvolvido avaliando dois prédios da Instituição, no caso, Prédio Engenharias 1 e Prédio da Biblioteca. Para realização do trabalho, inicialmente foram identificados todos os ambientes dos prédios avaliados, e realizouse um quantitativo das lâmpadas e seus tipos, além de medição in loco da iluminância de cada ambiente. Posteriormente, os valores medidos antes e após a troca foram comparados. Com o intuito de visualizar o impacto dessa substituição da iluminação, foram realizadas pesquisas de satisfação com os usuários destes lugares, que avaliaram de forma satisfatória.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.