Light‐emitting electrochemical cells (LECs) are solution processable solid‐state light sources comprising in their simplest architecture an ionic emissive layer in between of two electrodes. Although LECs possess several advantages that make them promising candidates for future large‐area low‐cost lighting technologies, their device wall‐plug efficacies remain so far moderate on the order of a few lumens per watt. One of the reasons therefore is considered to be the charge imbalance within the device. Here, a hybrid LEC device concept is introduced, whereby an additional layer of zinc oxide (ZnO) nanoparticles at the cathode side supports electron injection into the active light‐emitting layer and boosts the performance of the Ir‐based ionic transition metal complex LEC (iTMC‐LEC). The brightness and efficacy of the devices can be increased in average by more than 70% by the implementation of the additional inorganic layer. The time to reach the maximum brightness can be reduced in average by a factor of 7, which is attributed to an improved electron/hole balance in the device due to enhanced electron injection into the active iTMC layer.

No abstract

Large-area light emitters like organic (OLEDs) or quantum dot light-emitting devices (QLEDs) and light-emitting electrochemical cells (LECs) have gained increasing interest due to their cost-effective fabrication on various even flexible substrates.

A hybrid LEC showing an efficiency improvement of almost a factor of 2 compared to the reference device was realized using a thin hole-blocking layer of TmPyPB.

Greenish light-emitting electrochemical cells (LECs) reaching a lifetime of 271 hours at luminance of 1500 cd m−2 were realized by the introduction of a fluorinated ionic transition metal complex (iTMC) inside the ZnO nanocrystal hybrid-LEC device structure.