No abstract

No abstract

International audienceSoil Moisture and Ocean Salinity (SMOS), launched on 2 November 2009, is the first satellite mission addressing sea surface salinity (SSS) measurement from space. Its unique payload is the Microwave Imaging Radiometer using Aperture Synthesis (MIRAS), a new two-dimensional interferometer designed by the European Space Agency (ESA) and operating at the L-band frequency. This article presents a summary of SSS retrieval from SMOS observations and shows initial results obtained one year after launch. These results are encouraging, but also indicate that further improvements at various data processing levels are needed and hence are currently under investigation

The L-band interferometric radiometer onboard the Soil Moisture and Ocean Salinity mission will measure polarized brightness temperatures (Tb). The measurements are affected by strong radiometric noise. However, during a satellite overpass, numerous measurements are acquired at various incidence angles at the same location on the Earth's surface. The sea surface salinity (SSS) retrieval algorithm implemented in the Level 2 Salinity Prototype Processor (L2SPP) is based on an iterative inversion method that minimizes the differences between Tb measured at different incidence angles and Tb simulated by a full forward model. The iterative method is initialized with a first-guess surface salinity that is iteratively modified until an optimal fit between the forward model and the measurements is obtained. The forward model takes into account atmospheric emission and absorption, ionospheric effects (Faraday rotation), scattering of celestial radiation by the rough ocean surface, and rough sea surface emission as approximated by one of three models. Potential degradation of the retrieval results is indicated through a flagging strategy. We present results of tests of the L2SPP involving horizontally uniform scenes with no disturbing factors (such as sun glint or land proximity) other than wind-induced surface roughness. Regardless of the roughness model used, the error on the retrieved SSS depends on the location within the swath and ranges from 0.5 psu at the center of the swath to 1.7 psu at the edge, at 35 psu and 15 • C. Dual-polarization (DP) mode provides a better correction for wind-speed (WS) biases than pseudofirst Stokes mode (ST1).

International audienceNot Availabl

No abstract

No abstract

No abstract