This paper presents the thermal fatigue resistance of laser treated steels. The C40 and AISI H13 steels were machined into a geometry which allowed thermal gradients on the inner and outer surface during testing. A CO 2 laser system was used with a focused spot size of 0.09 mm on the sample surface. The laser peak power and pulse repetition frequency (PRF) range were set to 760 and 1515 W, and 2900 to 3500 Hz respectively. The thermal fatigue machine used consists of Nabertherm model cylindrical high temperature furnace with digital control panel, controlled temperature quenching system, and pneumatics control sample movement mechanism. The thermal fatigue test involved immersion of samples into molten aluminium, and quenched in ionised water emulsion at 17 °C temperature. The quenching system equipped with thermocouple to control the water temperature. Testing was done at a total of 1,750 number of cycles. Internal surface cooling was controlled by water inlet and outlet tubes. Samples were cleaned using NaOH solution after thermal fatigue testing to remove oxides on the surface. The solution temperature and magnetic stirrer speed were set to 100 °C and 4.5 rpm respectively. Samples were characterised using scanning electron microscope (SEM), energy discharge x-ray spectroscopy (EDXS) and 2D stylus profilometer. Presence of different phases on the sample surface were analysed from backscattered detector micrographs. Heat checks were observed on laser glazed surface at several regions. Carbides and oxides elements were detected on the sample surface after the thermal fatigue test. The relationship between surface roughness of laser treated surface and thermal fatigue behaviour was investigated.
In order to improve the wear properties of H13 die steel, the thermal fatigue properties of AISI H13 tool steel were investigated at a varied number of cycles for enhancing surface hardness. A CO 2 laser system was used with a 0.09mm focused spot size on the sample surface. The peak power of 1137kW and pulse repetition frequency (PRF) of 2300Hz were the parameters controlled. The Nabertherm model of a thermal fatigue machine used consisted of the cylindrical high temperature furnace with digital control panel, controlled temperature quenching system and pneumatics control sample movement mechanism. The samples were immersed in molten aluminum and quenched in ionized water emulsion at 17 o C temperature within a specific time per cycle. The quenching system was equipped with a thermocouple to control the water temperature. The testing was done on1,750 and 3,500 cycles. The treated samples was characterized for metallographic study and hardness. The metallographic study was conducted using an optical microscope for laser modified layer thickness and grain size and the hardness properties were measured using a Vickers indenter. Erosion occurred from the sample after 3500 cycles. The hardness of the laser treated layer was lowered, after a thermal fatigue test, from 650 HV 0.1 to 510 HV 0.1. These findings are important for designing high wear resistant surfaces through laser surface modification for applications forming semi-solid dies.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.