Although fish intake has potential health benefits, the presence of metal contamination in seafood has raised public health concerns. In this study, levels of mercury, cadmium, lead, tin and arsenic have been determined in fresh, canned and frozen fish and shellfish products and compared with the maximum levels currently in force. In a further step, potential human health risks for the consumers were assessed. A total of 485 samples of the 43 most frequently consumed fish and shellfish species in Andalusia (Southern Spain) were analyzed for their toxic elements content. High mercury concentrations were found in some predatory species (blue shark, cat shark, swordfish and tuna), although they were below the regulatory maximum levels. In the case of cadmium, bivalve mollusks such as canned clams and mussels presented higher concentrations than fish, but almost none of the samples analyzed exceeded the maximum levels. Lead concentrations were almost negligible with the exception of frozen common sole, which showed median levels above the legal limit. Tin levels in canned products were far below the maximum regulatory limit, indicating that no significant tin was transferred from the can. Arsenic concentrations were higher in crustaceans such as fresh and frozen shrimps. The risk assessment performed indicated that fish and shellfish products were safe for the average consumer, although a potential risk cannot be dismissed for regular or excessive consumers of particular fish species, such as tuna, swordfish, blue shark and cat shark (for mercury) and common sole (for lead).

No abstract

Administration of selenium in humans has anticarcinogenic effects. However, the boundary between cancer-protecting and toxic levels of selenium is extremely narrow. The mechanisms of selenium toxicity need to be fully understood. In Saccharomyces cerevisiae, selenite in the millimolar range is well tolerated by cells. Here we show that the lethal dose of selenite is reduced to the micromolar range by the presence of thiols in the growth medium. Glutathione and selenite spontaneously react to produce several selenium-containing compounds (selenodiglutathione, glutathioselenol, hydrogen selenide, and elemental selenium) as well as reactive oxygen species. We studied which compounds in the reaction pathway between glutathione and sodium selenite are responsible for this toxicity. Involvement of selenodiglutathione, elemental selenium, or reactive oxygen species could be ruled out. In contrast, extracellular formation of hydrogen selenide can fully explain the exacerbation of selenite toxicity by thiols. Indeed, direct production of hydrogen selenide with D-cysteine desulfhydrase induces high mortality. Selenium uptake by S. cerevisiae is considerably enhanced in the presence of external thiols, most likely through internalization of hydrogen selenide. Finally, we discuss the possibility that selenium exerts its toxicity through consumption of intracellular reduced glutathione, thus leading to severe oxidative stress.

Intramucosal 5-aminosalicylic acid (5-ASA) and acetylated 5-ASA (Ac-5-ASA) concentrations were determined in ileocolonic biopsy specimens from 61 patients with irritable bowel syndrome treated for one week with near equimolar doses of different slow release preparations of 5-ASA (Claversal, Asacol, or Pentasa) or azo-bound drugs (Salazopyrin, Dipentum). The transit time in these patients was accelerated by a laxative, metoclopramide, and colonic lavage. The presence of 5-ASA in the mucosa was confirmed by autofluorescence. The highest concentrations of 5-ASA were obtained after Asacol (mean (SEM), 298.5 (37.3) ng/mg wet wt), followed by Claversal 500 mg (108.8 (11.7) ng/mg wet wt) and Pentasa (25.7 (2.2) ng/mg wet wt). Very low concentrations only were observed after Claversal 250 mg (0.3 (0.03) ng/mg wet wt), Salazopyrine (1.2 (0.1) ng/mg wet wt), and Dipentum (11.0 (3.2) ng/mg wet wt). The results for Ac-5-ASA were similar but the concentrations were generally lower. Serum concentration-time curves over eight hours were obtained from 34 healthy volunteers after a single oral dose of 400 to 500 mg of the different drugs. For the slow release forms, an apparently inverse relationship was found between the area under the curve of the serum concentrations and the intramucosal concentrations, supporting the importance of the local availability of the drug. This inverse relationship was absent for the azo-bound drugs. Colonic washout induced mechanical removal of intraluminal 5-ASA with a secondary disturbance in absorption resulting in a rapid decline in the serum concentrations. However, only for Dipentum did this result in significantly lower 5-ASA mucosal concentrations. This is the first reported attempt to evaluate the mucosal availability of 5-ASA after different oral preparations. It shows that where transit time is accelerated higher mucosal concentrations occur after slow release preparations (except for Claversal 250 mg) than after azo-bound drugs. Additional studies are necessary to correlate these concentrations with clinical effects.

Stripping analysis has been widely recognised as a powerful tool in trace metal analysis. Its remarkable sensitivity is attributed to the combination of a preconcentration step coupled with pulse measurements that generate an extremely high signal-to-background ratio. Mercury-based electrodes have traditionally been used to achieve high reproducibility and sensitivity in the stripping technique. Because of the toxicity of mercury, however, new alternative electrode materials are highly desired, particularly for on-site monitoring. Use of thin films of bismuth deposited on platinum or glassy-carbon substrates has recently been proposed as a possible alternative to mercury--bismuth is "environmentally friendly", of low toxicity, and is in widespread pharmaceutical use. In this paper the preparation of economic bismuth-film microelectrodes by electrodeposition on a copper substrate and their application to heavy metal analysis are described. Bismuth-film electrodes were prepared by potentiostatic electrodeposition. Optimum conditions for chemical and electrochemical deposition to obtain an adherent, reproducible, and robust deposit were determined. The suitability of such microelectrodes for analysis of heavy metals was evaluated by anodic stripping voltammetry of cadmium. The analytical performance of bismuth-film electrodes for anodic stripping voltammetry of heavy metals was evaluated for non-deaerated solutions containing Cd2+, Pb2+, and Zn2+ ions. Well-defined peaks with low background current were obtained by use of differential pulse voltammetry. Linear calibration plots were obtained for Cd2+ in acidified tap water at concentrations ranging from 2 x 10(-8) to 1 x 10(-7) mol L(-1) and from 1 x 10(-7) to 1 x 10(-6) mol L(-1) with relative standard deviations of 5% (n = 15) at the 1 x 10(-7) mol L(-1) level. The method was then successfully used to monitor the Cd2+ content of plant extracts and validated by polarographic and ICP-MS measurements. These results open the possibility of using bismuth-coated copper electrodes as an alternative to mercury-based electrodes for analysis of heavy metals. The main problem remaining, which prevents on-site monitoring of heavy metals, is the need to use slightly acidic media, because formation of bismuth hydroxide on the film surface above pH 4.3 leads to non-reproducible measurements. Further experiments will be performed to discover whether electrode conditioning can be used to enable reproducible measurement in on-site monitoring of cadmium in natural waters. Moreover, further study should be conducted to evaluate the potential of BiFE for analysis of several pollutants of interest that are usually determined electrochemically by using mercury-based electrodes.