Abstract:In this paper, a real-time robust closed-loop control scheme for controlling the velocity of a Direct Current (DC) motor in a compound connection is proposed. This scheme is based on the state-feedback linearization technique combined with a second-order sliding mode algorithm, named super-twisting, for stabilizing the system and achieving control goals. The control law is designed to track a periodic square reference signal, being one of the most severe tests applied to closed-loop systems. The DC motor drives a squirrel-cage induction generator which represents the load; this generator must work above the synchronous velocity to deliver the generated power towards the grid. A classical proportional-integral (PI) controller is designed for comparison purposes of the time-domain responses with the proposed second-order sliding mode (SOSM) super-twisting controller. This robust controller uses only a velocity sensor, as is the case of the PI controller, as the time derivative of the velocity tracking variable is estimated via a robust differentiator. Therefore, the measurements of field current and stator current, the signal from a load torque observer, and machine parameters are not necessary for the controller design. The validation and robustness test of the proposed controller is carried out experimentally in a laboratory, where the closed-loop system is subject to an external disturbance and a time-varying tracking signal. This test is performed in real time using a workbench consisting of a DC motor-Alternating Current (AC) generator group, a DC/AC electronic drive, and a dSPACE 1103 controller board.
The authors propose robust non-linear controllers for a wind system. The proposed controllers are based on a combination of the block control linearisation and super-twisting algorithm, as a second-order sliding mode technique. The main control loop is designed to regulate the electromagnetic torque and stator power factor of a doubly-fed induction generator which is connected to the grid. The generator is mechanically coupled with a DC motor, which can emulate the wind turbine operation. Therefore, an auxiliary control loop is designed to control the DC motor velocity. Additionally, a grid-side converter controller is proposed to regulate the DC-link voltage into AC/DC/AC converter, and displacement factor of the energy flow between the rotor and the grid. A robust stability analysis of the complete closed-loop system under external disturbances is presented. The robustness of the proposed control schemes is validated in real time using a workbench, which consists of a motor-generator group, AC/DC/AC electronic drive and dSPACE DS 1104 controller boards.
A DC motor velocity control in feedback systems usually requires a velocity sensor, which increases the controller cost. Additionally, the velocity sensor used in industrial applications presents several disadvantages such as maintenance requirements and signal conditioning. In this work, we propose a robust velocity control scheme applied to a DC motor based on estimation strategies using a sliding-mode observer. This means that measurements with mechanical sensors are not required in the controller design. The proposed observer estimates the rotational velocity and load torque of the motor. The controller design applies the exact-linearization technique combined with the super-twisting algorithm to achieve robust performance in the closed-loop system. The controller validation was carried out by experimental tests using a workbench, which is composed of a control and data acquisition Digital Signal Proccessor board, a DC-DC electronic converter, an interface board for signals conditioning, and a DC electric generator connected to an adjustable resistive load. The simulation and experimental results show a significant performance of the proposed control scheme. During tests, the accuracy, robustness, and speed response on the controller were evaluated and the experimental results were compared with a classic proportional-integral controller, which uses a conventional encoder.
One of the most important bases for designing robust closed-loop controllers applied to induction motor with high performance is establishing its mathematical model and state observers, as well as the parameter identification with high accuracy. On this paper, a step-by-step mathematical model of the squirrel-cage induction motor is described at αβ coordinate frame where the parameters are defined in detailed form; the rotor flux linkages and load torque are estimated via an asymptotic observer; the induction motor parameter identification is performed via a data acquisition board, applying dynamic and steady-state tests. Inductances of the induction motor model are calculated using the proposed relationships between the magnetically-coupled circuit and equivalent circuit model. The mathematical model, state observers and parameter identification procedure of squirrel-cage induction motor are validated via comparison of simulation signals with their corresponding real-time signals. This validation is made experimentally by a steady state test, where load conditions are changed via a dynamometer which is belt coupled with the squirrel-cage induction motor.
The wind power systems of variable velocity using a doubly-fed induction generator dominate large-scale electrical generation within renewable energy sources. The usual control goal of the wind systems consists of maximizing the wind energy capture and streamlining the energy conversion process. In addition, these systems are an intermittent energy source due to the variation of the wind velocity. Consequently, the control system designed to establish a reliable operation of the wind system represents the main challenge. Therefore, emulating the operation of the wind turbine by means of an electric motor is a common strategy so that the controller design is focused on the induction generator and its connection to the utility grid. Thus, we propose to emulate the dynamical operation of a wind turbine through a separately excited DC motor driving by a sensor-less velocity controller. This controller is synthesized based on the state-feedback linearization technique combined with the super-twisting algorithm to set a robust closed-loop system in the presence of external disturbances. A robust velocity observer is designed to estimate the rotor velocity based on the armature current measuring. Furthermore, a robust differentiator is designed for estimating the time derivative of the velocity error variable, achieving a reduction in the computational calculus. Experimental tests were carried using a separately excited DC motor coupled with a dynamometer to validate the proposed wind turbine emulator.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.