CCQM-K120.a comparison involves preparing standards of carbon dioxide in air which are fit for purpose for the atmospheric monitoring community, with stringent requirements on matrix composition and measurement uncertainty of the CO2 mole fraction. This represents an analytical challenge and is therefore considered as a Track C comparison. The comparison will underpin CMC claims for CO2 in air for standards and calibrations services for the atmospheric monitoring community, matrix matched to real air, over the mole fraction range of 250 μmol/mol to 520 μmol/mol. CCQM-K120.b comparison tests core skills and competencies required in gravimetric preparation, analytical certification and purity analysis. It is considered as a Track A comparison. It will underpin CO2 in air and nitrogen claims in a mole fraction range starting at the smallest participant's reported expanded uncertainty and ending at 500 mmol/mol. Participants successful in this comparison may use their result in the flexible scheme and underpin claims for all core mixtures This study has involved a comparison at the BIPM of a suite of 44 gas standards prepared by each of the participating laboratories. Fourteen laboratories took part in both comparisons (CCQM-K120.a, CCQM-K120.b) and just one solely in the CCQM-K120.b comparison. The standards were sent to the BIPM where the comparison measurements were performed. Two measurement methods were used to compare the standards, to ensure no measurement method dependant bias: GC-FID and FTIR spectroscopic analysis corrected for isotopic variation in the CO2 gases, measured at the BIPM using absorption laser spectroscopy. Following the advice of the CCQM Gas Analysis Working Group, results from the FTIR method were used to calculate the key comparison reference values. KEY WORDS FOR SEARCH FTIR, CO2, GC-FID, Carbon dioxide at background level, Carbon dioxide at urban level, Delta Ray, CO2 gas standards Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
The CCQM-K82 comparison was designed to evaluate the degrees of equivalence of NMI capabilities for methane in air primary reference mixtures in the range (1800 to 2200) nmol/mol. The balance gas for the standards was either scrubbed dry real air or synthetic air. CH4 in air standards have been produced by a number of laboratories for many years, with more recent developments focused on standards at atmospheric measurement concentrations and aimed at obtaining agreement between independently produced standards. A comparison of the differences in primary gas standards for methane in air was previously performed in 2003 (CCQM-P41 Greenhouse gases. 1 and 2) with a standard deviation of results around the reference value of 30 nmol/mol and 10 nmol/mol for a more limited set of standards. This can be contrasted with the level of agreement required from field laboratories routinely measuring atmospheric methane levels, set by Data Quality Objectives (DQO) established by the World Meteorological Organization (WMO) to reflect the scientifically desirable level of compatibility for CH4 measurements at the global scale, currently set at 2 nmol/mol (1 sigma). The measurements of this key comparison took place from May 2012 to June 2012. Eight laboratories took part in this comparison coordinated by the BIPM and NIST. Key comparison reference values were calculated based on Cavity Ring Down Spectroscopy Measurements performed at the BIPM, combined with participant's gravimetric values to identify a consistent set of standards. Regression analysis allowed predicted values for each standard to be calculated which acted as the KCRVs. In this comparison reported standard uncertainties by participants ranged from 0.50 nmol/mol to 2.4 nmol/mol and the uncertainties of individual KCRVs ranged from 0.68 nmol/mol to 0.71 nmol/mol. The standard deviation of the ensemble of standards about the KCRV value was 1.70 nmol/mol. This represents a greater than tenfold improvement in the level of compatibility of methane in air standards compared to that demonstrated in 2003. Further improvements in the compatibility of standards will require improved methods and uncertainties for the measurement of trace level methane in balance gases. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/.The final report has been peer-reviewed and approved for publication by CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
Metrological services from National Metrology Institutes related to energy gases have been supported by the programme of key comparisons of the Gas Analysis Working Group of the Consultative Committee for Amount of Substance: Metrology in Chemistry and Biology since its conception in 1993. Most of the key comparisons have been performed on natural gas composition measurement, which is key to the calculation of natural gas properties, thereby facilitating fiscal metering and the trade in natural gas. In the recent years, non-conventional energy gases and natural gas substitutes, such as refinery gas and biogas have been addressed. The paper gives an overview over the achievements in this area from the first key comparison (CCQM-K1) onward and outlines the current challenges to the metrological community. The ongoing energy transition towards renewable energy gases is at the centre of these challenges. The associated emerging challenges primarily concern the measurement of the concentrations of impurities, such as silicon in biomethane and upgraded biogas, carbon monoxide in hydrogen, and many others. The paper presents the first results of the development of measurement standards and methods for impurities in biogas, biomethane and hydrogen and the implications for the programme of key comparisons.
Table 2 provides is a list of the participating laboratories.
Traceable liquid hydrocarbon mixtures are required in order to underpin measurements of the composition and other physical properties of LPG (liquefied petroleum gas) and LNG (liquefied natural gas), thus meeting the needs of an increasingly large European industrial market.The development of traceable liquid hydrocarbon standards by National Measurement Institutes (NMIs) was still at a relatively early stage at the time this comparison was proposed in 2011. NPL and VSL, who were the only NMIs active in this area, had developed methods for the preparation and analysis of such standards in constant pressure (piston) cylinders, but neither laboratory had Calibration and Measurement Capabilities (CMCs) for these mixtures.This report presents the results of EURAMET 1195, the first comparison of liquid hydrocarbon mixtures between NMIs, which assessed the preparation and analytical capabilities of NPL and VSL for these mixtures. The comparison operated between August 2011 and January 2012. Each laboratory prepared a liquid hydrocarbon standard with nominally the same composition and these standards were exchanged for analysis.The results of the comparison show a good agreement between the laboratories' results and the comparison reference values for the six components with amount fractions greater than 1.0 cmol/mol (propane, propene, iso-butene, n-butane, iso-butane and 1-butene). Measurement of the three components with lower amount fractions (1,3-butadiene, iso-pentane and n-pentane) proved more challenging. In all but one case, the differences from the comparison reference values for these three components were greater than the expanded measurement uncertainty.Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/.The final report has been peer-reviewed and approved for publication by EURAMET, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.