The aim of the research was to develop optimal conditions for manufacturing materials based on hyaluronic acid by the electrospun method. The studies were composed of three stages: the process of selection of the optimal solvent (mixture of solvents), the molecular weight of hyaluronic acid, and the concentration of biopolymer in the spinning solution. The influence of variable parameters on the rheological properties of the spinning solutions and electrospinning trails was tested. Depending on the electrospinning regime applied, the fibers obtained were characterised by a diameter of the order of 20 to 400 nm. As a result of the development works presented, an optimal molecular weight of the polymer, its concentration and system of solvents were determined, together with process parameters, ensuring a stable electrospinning process and relatively homogeneous nanofibers. Additionally studies on the residues of solvents used during electrosun formation were done and parameters of drying of the final materials were examined. This approach (verification of the presence oforganic solvent residue in the nanofibrous formed) is important for the suitability of nanofibres as scaffolds for regenerative medicine. This study provides an opportunity for the understanding and identification of process parameters, allowing for predictable manufacturing nanofibers based on natural biopolymers, which makes it tremendously beneficial in terms of customisation.
Hyaluronate and alginate are non-toxic and biocompatible polymers, which can be used for surface modification and functionalization of many kinds of materials. Electrophoretic deposition (EPD) has several advantages, including its versatility, simplicity, and ability to coat substrates with complex shapes, and is used for the creation of antimicrobial or hydrophobic coatings on metallic biomaterials, among other applications. However, its utilization for applying biopolymer layers on textiles is very limited due to the more complex structure and spatial characteristics of fibrous materials. The aim of this research was to analyze the effects of selected EPD process parameters and the structural characteristics of fibrous carriers on the kinetics of the process and the microscopic characteristics of the deposited layers. The influence of solution characteristics, process parameters, and carrier structures obtained using two different techniques (melt blown and spun-bonded) were analyzed. The morphology and structure of the created deposits were analyzed using scanning electron microscopy and computed tomography, and molecular structure analysis was performed with Fourier Transform Infrared spectroscopy. The surface mass and thickness of fibrous poly (lactic acid)-based carriers were analyzed in accordance with the respective standards. This study serves as a basis for discussion and further development of this method with regard to fibrous materials for medical applications.
Studies related to selection of molar mass of hyaluronic acid and analysis of rheological properties of hyaluronic acid solutions modified with bioactive substances, used in spinning, were undertaken within the presented work. A cephalosporin group antibiotic, Biofuroxime ® , was used, together with the nanoadditives zinc oxide (ZnO) and hydroxyapatite (HAp). Electrospinning studies were performed on selected solutions using a large scale laboratory station, allowing the process to be performed using three nozzles supplying the spinning solution. Optimum electrospinning conditions were selected on the basis of the performed study, which allow fibrous structures made of elementary fibres with diameters below 200 nm to be obtained. Studies showed that the most preferred distance between the nozzle and the collecting manifold was 450 mm and the most preferred applied voltage was 30 kV. The obtained, modified nanofibres of hyaluronic acid comprise structures for use in the production of biomaterials with a wide range of applications in tissue engineering.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.