Abstract. In this paper, we present and analyze a novel global database of soil infiltration measurements, the Soil Water Infiltration Global (SWIG) database. In total, 5023 infiltration curves were collected across all continents in the SWIG database. These data were either provided and quality checked by the scientists who performed the experiments or they were digitized from published articles. Data from 54 different countries were included in the database with major contributions from Iran, China, and the USA. In addition to its extensive geographical coverage, the collected infiltration curves cover research from 1976 to late 2017. Basic information on measurement location and method, soil properties, and land use was gathered along with the infiltration data, making the database valuable for the development of pedotransfer functions (PTFs) for estimating soil hydraulic properties, for the evaluation of infiltration measurement methods, and for developing and validating infiltration models. Soil textural information (clay, silt, and sand content) is available for 3842 out of 5023 infiltration measurements (∼ 76%) covering nearly all soil USDA textural classes except for the sandy clay and silt classes. Information on land use is available for 76 % of the experimental sites with agricultural land use as the dominant type (∼ 40%). We are convinced that the SWIG database will allow for a better parameterization of the infiltration process in land surface models and for testing infiltration models. All collected data and related soil characteristics are provided online in *.xlsx and *.csv formats for reference, and we add a disclaimer that the database is for public domain use only and can be copied freely by referencing it. Supplementary data are available at https://doi.org/10.1594/PANGAEA.885492 (Rahmati et al., 2018). Data quality assessment is strongly advised prior to any use of this database. Finally, we would like to encourage scientists to extend and update the SWIG database by uploading new data to it.

No abstract

Olive cultivation is considered as one of the most significant agricultural activities in Greece, from a financial, social, and ecological point of view. Intensive cultivation practices in combination with the Mediterranean climate, lead to depletion of soil organic matter, erosion, desertification, and degradation of water resources. This paper describes sustainable olive crop management practices that were comparatively applied in 120 olive groves in Greece for 5 years with the participation of three farmers groups. Organic materials recycled in the olive groves during the present study were valuable sources of carbon, nitrogen, phosphorus, and potassium. Carbon content was highest in pruning residue (53.8–54.2%) while all materials studied were considered rich in C ranging between 41.9–46.2% (compost) and 34.9–42.5% (three-phase olive mill waste-OMW). The highest content in nitrogen was detected in compost (2–2.45%) followed by pruning residue (0.93–0.99%) and OMW (0.03–0.1%). Compost was considered a good source of phosphorus (0.3–0.6%) followed by pruning residue (0.08–0.13%) and OMW (0.01–0.3%). Potassium was also considerable in the organic materials recycled ranging 0.5–1.5% in compost followed by pruning residue (0.5–0.7%) and OMW (0.3–1.1%). Adoption of modified pruning also had important contribution toward sustainable management of olive trees. Sustainable pruning resulted in a well-balanced ratio between vegetative growth and fruiting (balanced, every year, in order to eradicate biennial bearing). Significant fluctuation in olive yields was observed in the first years of the project while yields were gradually stabilised by applying sustainable crop management. In parallel, yield increase without additional inputs, lowers the carbon—environmental footprint of the product regarding several environmental impact categories. Results can be integrated in the national agricultural and environmental policy in Mediterranean countries toward the achievement of a circular economy.

Abstract. In this paper, we present and analyze a global database of soil infiltration measurements, the Soil Water Infiltration Global (SWIG) database, for the first time. In total, 5023 infiltration curves were collected across all continents in the SWIG database. These data were either provided and quality checked by the scientists who performed the experiments or they were digitized from published articles. Data from 54 different countries were included in the database with major contributions from Iran, China, and USA. In addition to its global spatial coverage, the collected infiltration curves cover a time span of research from 1976 to late 2017. Basic information on measurement location and method, soil properties, and land use were gathered along with the infiltration data, which makes the database valuable for the development of pedo-transfer functions for estimating soil hydraulic properties, for the evaluation of infiltration measurement methods, and for developing and validating infiltration models. Soil textural information (clay, silt, and sand content) is available for 3842 out of 5023 infiltration measurements (~76 %) covering nearly all soil USDA textural classes except for the sandy clay and silt classes. Information on the land use is available for 76 % of experimental sites with agricultural land use as the dominant type (~40 %). We are convinced that the SWIG database will allow for a better parameterization of the infiltration process in land surface models and for testing infiltration models. All collected data and related soil characteristics are provided online in *.xlsx and *.csv formats for reference, and we add a disclaimer that the database is for use by public domain only and can be copied freely by referencing it. Supplementary data are available at doi:10.1594/PANGAEA.885492. Data quality assessment is strongly advised prior to any use of this database. Finally, we would like to encourage scientists to extend/update the SWIG by uploading new data to it.

No abstract