Previous efforts to directly write conductive metals have been narrowly focused on nanoparticle ink suspensions that require aggressive sintering (>200°C) and result in low-density, small-grained agglomerates with electrical conductivities <25% of bulk metal. Here, we demonstrate aerosol jet printing of a reactive ink solution and characterize high-density (93%) printed silver traces having near-bulk conductivity and grain sizes greater than the electron mean free path, while only requiring a lowtemperature (80°C) treatment. We have developed a predictive electronic transport model which correlates the microstructure to the measured conductivity and identifies a strategy to approach the practical conductivity limit for printed metals. Our analysis of how grain boundaries and tortuosity contribute to electrical resistivity provides insight into the basic materials science that governs how an ink formulator or process developer might approach improving the conductivity. Transmission line measurements validate that electrical properties are preserved up to 20 GHz, which demonstrates the utility of this technique for printed RF components. This work reveals a new method of producing robust printed electronics that retain the advantages of rapid prototyping and three-dimensional fabrication while achieving the performance necessary for success within the aerospace and communications industries.
Printed radio frequency (RF) electronic components are often prohibitively lossy due to the materials challenges involved in additively manufacturing metals and dielectrics. We use aerosol jet printing of reactive silver inks to fabricate microstrip transmission lines onto commercial RF boards and subsequently extract the insertion loss of the printed silver through bisect de-embedding of the transmission lines. We directly compare the performance of our printed silver microstrips to conventional copper-clad microstrips to benchmark the efficacy of additive manufacturing against traditional processing methods. With an insertion loss nearing that of conventional copper, reactive silver ink printed traces offer dense continuous metals that can reliably act as conductors for RF applications. In addition to the morphological effects on loss from the printed metal itself, we also observe that the effect of substrate surface texture contributes to unexpected loss that may be mitigated by smoothing the surface or aligning the print direction to minimize these effects. Metallizing passive RF components using reactive inks offers a practical approach which will allow RF designers to take advantage of three-dimensional space. This is possible without sacrificing the necessary high conductivity and low loss needed to produce high performance devices for use within aerospace and communications.INDEX TERMS 3D printing, additive manufacturing, microstrip line, printed circuit board.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.