The study of plasma instabilities is a research topic with fundamental importance since for the majority of plasma applications they are unwanted and there is always the need for their suppression. The initiating physical processes that seed the generation of plasma instabilities are not well understood in all plasma geometries and initial states of matter. For most plasma instability studies, using linear or even nonlinear magnetohydrodynamics (MHD) theory, the most crucial step is to correctly choose the initial perturbations imposed either by a predefined perturbation, usually sinusoidal, or by randomly seed perturbations as initial conditions. Here, we demonstrate that the efficient study of the seeding mechanisms of plasma instabilities requires the incorporation of the intrinsic real physical characteristics of the solid target in an electro-thermo-mechanical multiphysics study. The present proof-of-principle study offers a perspective to the understanding of the seeding physical mechanisms in the generation of plasma instabilities.

This article addresses key features for the implementation of low current pulsed power plasma devices for the study of matter dynamics from the solid to the plasma phase. The renewed interest in such low current plasma devices lies in the need to investigate methods for the mitigation of prompt seeding mechanisms for the generation of plasma instabilities. The low current when driven into thick wires (skin effect mode) allows for the simultaneous existence of all phases of matter from solid to plasma. Such studies are important for the concept of inertial confinement fusion where the mitigation of the instability seeding mechanisms arising from the very early moments within the target's heating is of crucial importance. Similarly, in the magnetized liner inertial fusion concept it is an open question as to how much surface nonuniformity correlates with the magneto-Rayleigh-Taylor instability, which develops during the implosion. This study presents experimental and simulation results, which demonstrate that the use of low current pulsed power devices in conjunction with appropriate diagnostics can be important for studying seeding mechanisms for the imminent generation of plasma instabilities in future research.

The computational study of x-pinch plasmas driven by pulsed power generators demands the development of advanced numerical models and simulation schemes, able to enlighten the experiments. The capabilities of PLUTO code are here extended to enable the investigation of low current produced x-pinch plasmas. The numerical modules of the code used and modified are presented and discussed. The simulations results are compared to experiments, carried out on a table-top pulsed power plasma generator implemented in a mode of producing a peak current of ∼45 kA with a rise time (10%–90%) of 50 ns, loaded with Tungsten wires. The structural evolution of plasma density is studied and its influence on the magnetic field is analyzed with the help of the new simulation data. The simulated areal mass density is compared with the experimentally measured dense opaque region to enlighten the dense plasma evolution. In addition, the measured areal electron density is compared to the simulation results. Moreover, the new simulation data offer valuable insights to the main jet formation mechanisms, which are further analyzed and discussed in relation to the influence of the J × B force and the momentum.

The object of this study was to investigate whether laser-induced skin autofluorescence (LIF) and/or light reflectance spectra could provide a useful contrast between basal cell carcinoma (BCC) tissues and the surrounding healthy skin. Unstained human skin samples, excised from humans undergoing biopsy examination, were irradiated with a nitrogen laser (λ = 337 nm) for excitation of autofluorescence and a tungsten halogen lamp for the reflectance measurements. The ex vivo spectroscopic results were correlated with the histopathology images to distinguish the areas of BCC from those of the surrounding health skin. A simple spectral analysis technique was also applied for better skin diagnosis. In conclusion, it seems that LIF and reflectance spectra could be used to differentiate neoplastic from normal skin tissue using an appropriate classification model analysis.

No abstract

The three dimensional spatiotemporal response of thin metal films surfaces excited by nanosecond laser pulses is investigated in both the thermoelastic and the ablation regimes. An experimental laser whole-field interferometric technique allows for the direct monitoring of the dynamic deformation of a macroscopic area on the surface with ultrahigh lateral resolution. A specially developed three dimension finite element model simulates the laser-surface interaction, predicts the experimentally obtained results, and computes key parameters of matter's thermomechanical response. This method provides a powerful instrument for spatiotemporal behavior of thin-film surfaces under extreme conditions demanded for innovative applications.

No abstract

This research work emphasises on the capability of delivering optically shaped targets through the interaction of nanosecond laser pulses with high-density gas-jet profiles, demanded to explore the proton acceleration in the near-critical density regime, via the Magnetic Vortex Acceleration (MVA). Multiple BlastWaves (BWs) are generated by laser pulses that compress the gas-jet into near-critical steep gradient slabs of a few microns thickness. Geometrical alternatives for delivering the laser pulses into the gas target are explored to efficiently control the characteristics of the density profile. The generated BWs shock front collisions are computationally studied by three-dimensional magnetohydrodynamic (MHD) simulations. The efficiency of the proposed target shaping method for MVA is demonstrated for TW-class lasers by a Particle-In-Cell (PIC) simulation.