A nivel nacional, cada vez es más frecuente la aplicación de sistemas electrónicos de control automático en los procesos de producción agrícola. El desarrollo y aplicación de los sistemas de control automático permiten la adaptación de las técnicas de cultivo a las condiciones ambientales, para conseguir un cultivo más rentable y racional en zonas pequeñas de una misma explotación agrícola. Este trabajo contempla el desarrollo y la evaluación de un sistema de control automático para controlar la apertura o el cierre de una malla sombra en función a la radiación incidente en el cultivo. Se desarrolló un algoritmo y programa que automatiza la colocación de la malla sombra, con ayuda de un controlador lógico programable (PLC Millenium III) para mayor facilidad de la implementación. Se aplicó el sistema desarrollado al cultivo de fresa (Fragaria sp.). Se realizaron las pruebas y la evaluación con tres camas de fresa: en campo abierto, malla fija y malla móvil controlada en función de la radiación. La malla sombra, se abre si la radiación es menor a 400 W/m2 o se cierra si la cantidad de radiación es mayor a 600 W/m2 al medirse con un sensor, además se puede abrir y cerrar manualmente para realizar la cosecha y el mantenimiento. Uno de los resultados obtenidos, es que la producción en la cama bajo la malla móvil es mayor en 12,88% que en la malla fija y en 37,42% que en el campo abierto.
Para diseñar máquinas cortadoras y deshojadoras de mazorcas (Zea mays L.), es necesario conocer las propiedades geométricas del fruto que forman los datos de entrada para la evaluación de los modelos matemáticos del sistema fruto-máquina. Se determinaron tres características geométricas nuevas: diámetro de corte óptimo (do), longitud de la base al diámetro mayor (lbdm) y longitud de la base al diámetro de corte óptimo (lbco) de una muestra de 50 mazorcas de maíz blanco de la variedad Murano, del estado de Morelos, así como longitud total (lt) y diámetro mayor (dm). Del mismo modo para una muestra de 103 mazorcas variedad Arroz del estado de Veracruz se determinaron lbco, lbdm, dm y lt, además se realizó un registro fotográfico y se procesó con el software OpenCV con determinación de dos parámetros más-área (A) y longitud de la base al centroide (lbc). El análisis estadístico mostró que existe una correlación simple de 0.905 entre lbco-lbdm y dos coeficientes de correlación múltiple de 0.904 entre dm-lbdm-lbco, y de 0.917 entre lt-lbdm-lbco para la variedad Murano. La variedad Arroz mostro una correlación múltiple de 0.66 entre lbco-dm-lbdm-lt-A-lbc. Con los resultados se establecieron diferentes modelos matemáticos de relación entre los parámetros de la mazorca para su aplicación en el diseño de un prototipo mejorado de deshojadora.
ResumenUn sistema fotovoltaico (SFV) puede proporcionar energía a usuarios que habitan en zonas donde no hay red de servicio público. El presente trabajo presenta una metodología que permite determinar la distancia mínima y el consumo mínimo de la energía en función de la distancia de la red eléctrica existente que justifica el uso de SFV´s comparando los precios por construcción y conexión de la red de Energía Eléctrica de Comisión Federal de Electricidad (CFE) en función de la distancia de construcción y los costos de instalación de sistemas fotovoltaicos para invernaderos con gastos de energía hasta de 30 kWh calculados con el programa desarrollado por el posgrado IAUIA de la UACh. Existen diferentes tarifas de energía eléctrica, las cuales aumentan anualmente de 4.4 hasta 27 %, estas se analizaron para los años 2003 -2013 y se proyectaron hasta el año 2038. Se comprobó que calculando los gastos eléctricos con las tarifas 9M establecidas en el sector agrícola y para 10 y 15 años de uso de SFV es viable instalarlos aun en lugares donde ya existe la red eléctrica de CFE para la energía consumida mayor de 4.8 y 1.5 kWh por día en invernaderos correspondientemente, ya que solo los gastos por consumo energético durante estos años rebasan los costos de instalación de SFV. Se determinó el consumo mínimo de energía en función de la distancia de existencia de la red eléctrica que justifica la instalación de los SFV. AbstractA photovoltaic system (SFV) can provide power to users who live in areas where no public service network. This paper presents a methodology to determine the minimum distance and minimum energy consumption depending on the distance from the existing electrical grid that justifies the use of SFV's comparing prices for construction and network connection Electric Power Federal Electricity Commission (CFE) as a function of distance from construction and installation costs of photovoltaic systems for greenhouses with energy costs up to 30 kWh calculated with the program developed by the IAUIA graduate UACh. There are different electricity rates, which increase annually from 4.4 to 27%, these were analysed for the years 2003 to 2013 and projected to 2038. It was found that calculating electrical costs with 9M rates established in the agricultural sector and 10 and 15 years of using SFV is feasible to install even in places where there is already CFE's power grid for most energy consumed 4.8 and 1.5 kWh per day in greenhouses correspondingly, as only energy expenses during these years beyond installation costs SFV. Minimum power consumption in function of the distance of the grid existence of justifying the installation of SFV was determined.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.