Ammonia (NH3) concentration has seldom been used for environmental control of weaner buildings despite its impact on environment, animal welfare, and workers’ health. This paper aims to determine the effects of setpoint temperature (ST) on the daily evolution of NH3 concentration in the animal-occupied zone. An experimental test was conducted on a conventional farm, with ST between 23 °C and 26 °C. NH3 concentrations in the animal-occupied zone were dependent on ST insofar as ST controlled the operation of the ventilation system, which effectively removed NH3 from the building. The highest NH3 concentrations occurred at night and the lowest concentrations occurred during the daytime. Data were fitted to a sinusoidal model using the least squares setting (LSS) and fast Fourier transform (FFT), which provided R2 values between 0.71 and 0.93. FFT provided a better fit than LSS, with root mean square errors (RMSEs) between 0.09 ppm for an ST of 23 °C and 0.55 ppm for an ST of 25 °C. A decrease in ST caused a delay in the wave and a decrease in wave amplitude. The proposed equations can be used for modeling NH3 concentrations and implemented in conventional controllers for real-time environmental control of livestock buildings to improve animal welfare and productivity.

An AutoRegressive Integrated Moving Average model was validated for the prediction of temperatures in the animal zone of conventional weaned piglet barn. The validation period covered seven cycles and recorded values at 10-min intervals for 292 days. Average weight was 5.75±0.86 kg at the beginning of the production cycle and 18.41±2.12 kg at the end of the cycle. Mean outdoor air temperatures ranged 6.14 to 17.85ºC with deviations in the range 2.49ºC to 5.24ºC, which involved marked differences in the operation of the ventilation system. The Mean Average Percentage Error was below 4%, with a mean error of 1ºC. The Root Mean Square Error was in the range 0.77ºC to 1.19ºC, whereas the coefficient of determination ranged between 0.52 and 0.81. Despite the changes in environmental conditions and in animal weight and management, the accuracy of the model remained stable with low dispersion of values. Tao outdoor air temperature, ºC Taz animal zone temperature, ºC Vao volume of extracted air by the fan, m 3

Postweaning is one of the most sensitive and energy-demanding phases of swine production. The objective of this research was to assess the energy, production and environmental characteristics of a conventional farm with temperature-based environmental control. The selected energy, environmental and production variables were measured on farm, in a high livestock density area of NW Spain, for seven production cycles. The quantification of variables was aimed at obtaining the maximum performance with the lowest possible use of resources, focusing on animal welfare and production efficiency. The Brown–Forsythe, Welch and Games-Howell tests revealed significant differences in terms of temperature, relative humidity and CO2 concentrations among production cycles, and among the critical, postcritical and final periods. Improved humidity management resulted in a 17% reduction of climate control energy, which involved energy savings in the range of 33% to 47% per kg produced at the end of the postweaning cycle. Accordingly, adding humidity as a control variable could result in higher ventilation rates, thereby improving animal welfare, reducing heating energy use and increasing weight gain per unit climate control energy. In addition, the strong correlations found between heating energy and relative humidity (R2 = 0.73) and ventilation energy and CO2 (R2 = 0.99) suggest that these variables could be readily estimated without additional sensor costs.