No abstract

No abstract

No abstract

In order to guarantee a sustainable supply of future energy demand without compromising the environment, some actions for a substantial reduction of emissions are nowadays deeply analysed. One of them is the improvement of the nuclear energy use. In this framework, innovative gas-cooled reactors (both thermal and fast) seem to be very attractive from the electricity production point of view and for the potential industrial use along the high temperature processes (e.g., production by steam reforming or I-S process). This work focuses on a preliminary (and conservative) evaluation of possible advantages that a symbiotic cycle (EPR-PBMR-GCFR) could entail, with special regard to the reduction of the HLW inventory and the optimization of the exploitation of the fuel resources. The comparison between the symbiotic cycle chosen and the reference one (once-through scenario, i.e., EPR-SNF directly disposed) shows a reduction of the time needed to reach a fixed reference level from 170000 years to 1550 years (comparable with typical human times and for this reason more acceptable by the public opinion). In addition, this cycle enables to have a more efficient use of resources involved: the total electric energy produced becomes equal to 630 TWh/year (instead of only 530 TWh/year using only EPR) without consuming additional raw materials.

No abstract

The objective of this work was to assess the potential of thorium based fuel to minimise Pu and MA production in Pressurised Water Reactors (PWRs). The assessment was carried out by examining destruction rates and residual amounts of Pu and MA in the fuel used for transmutation. In particular, sensitivity of these two parameters to the fuel lattice Hydrogen to Heavy Metal (H/HM) ratio and to the fuel composition was systematically investigated. All burn-up calculations were performed using CASMO4 -the fuel assembly burn-up code. The results indicate that up to 1 000 kg of reactor grade Pu can potentially be burned in thorium based fuel assemblies per GW e Year. Up to 75% of initial Pu can be destroyed per path. Addition of MA to the fuel mixture degrades the burning efficiency. The theoretically achievable limit for total TRU destruction per path is 50%. Efficient MA and Pu destruction in thorium based fuel generally requires a higher degree of neutron moderation and, therefore, higher fuel lattice H/HM ratio than typically used in the current generation of PWRs. Reactivity coefficients evaluation demonstrated the feasibility of designing a Th-Pu-MA fuel with negative Doppler and moderator temperature coefficients. 280

Nowadays nuclear is the only greenhouse-free source that can appreciably respond to the increasing worldwide energy demand. The use of Thorium in the nuclear energy production may offer some advantages to accomplish this task. Extensive R&D on the thorium fuel cycle has been conducted in many countries around the world. Starting from the current nuclear waste policy, the EU-PUMA project focuses on the potential benefits of using the HTR core as a Pu/MA transmuter. In this paper the following aspects have been analysed: (1) the state-of-the-art of the studies on the use of Th in different reactors, (2) the use of Th in HTRs, with a particular emphasis on Th-Pu fuel cycles, (3) an original assessment of Th-Pu fuel cycles in HTR. Some aspects related to Thorium exploitation were outlined, particularly its suitability for working in pebble-bed HTR in a Th-Pu fuel cycle. The influence of the Th/Pu weight fraction at BOC in a typical HTR pebble was analysed as far as the reactivity trend versus burn-up, the energy produced per Pu mass, and the Pu isotopic composition at EOC are concerned. Although deeper investigations need to be performed in order to draw final conclusions, it is possible to state that some optimized Th percentage in the initial Pu/Th fuel could be suggested on the basis of the aim we are trying to reach.

No abstract