Precise patterning of quantum dot (QD) layers is an important prerequisite for fabricating QD light‐emitting diode (QLED) displays and other optoelectronic devices. However, conventional patterning methods cannot simultaneously meet the stringent requirements of resolution, throughput, and uniformity of the pattern profile while maintaining a high photoluminescence quantum yield (PLQY) of the patterned QD layers. Here, a specially designed nanocrystal ink is introduced, “photopatternable emissive nanocrystals” (PENs), which satisfies these requirements. Photoacid generators in the PEN inks allow photoresist‐free, high‐resolution optical patterning of QDs through photochemical reactions and in situ ligand exchange in QD films. Various fluorescence and electroluminescence patterns with a feature size down to ≈1.5 µm are demonstrated using red, green, and blue PEN inks. The patterned QD films maintain ≈75% of original PLQY and the electroluminescence characteristics of the patterned QLEDs are comparable to thopse of non‐patterned control devices. The patterning mechanism is elucidated by in‐depth investigation of the photochemical transformations of the photoacid generators and changes in the optical properties of the QDs at each patterning step. This advanced patterning method provides a new way for additive manufacturing of integrated optoelectronic devices using colloidal QDs.

Late transition metal oxo complexes with high d-electron counts have been implicated as intermediates in a wide variety of important catalytic reactions; however, their reactive nature has often significantly limited their study. While some examples of these species have been isolated and characterized, complexes with d-electron counts >4 are exceedingly rare. Here we report that use of a strongly donating tris(imidazol-2-ylidene)borate scaffold enables the isolation of two highly unusual Co-oxo complexes which have been thoroughly characterized by a suite of physical techniques including single crystal X-ray diffraction. These complexes display O atom and H atom transfer reactivity and demonstrate that terminal metal oxo complexes with six d-electrons can display strong metal-oxygen bonding and sufficient stability to enable their characterization. The unambiguous assignment of these complexes supports the viability of related species that are frequently invoked, but rarely observed, in the types of catalytic reactions mentioned above. The studies described here change our understanding of the reactivity and bonding in late transition metal oxo complexes and open the door to further study of the properties of this class of elusive and important intermediates.

The functionalization of C-H bonds is an essential reaction in biology and chemistry. Metalloenzymes that often exhibit this type of reactivity contain metal-oxido intermediates which are directly involved the initial cleavage of the C-H bonds. Regulation of the cleavage process is achieved, in part, by hydrogen bonds that are proximal to the metal-oxido units, yet our understanding of their exact role(s) is still emerging. To gain further information into the role of H-bonds on C-H bond activation, a hybrid set of urea-containing tripodal ligands has been developed in which a single H-bond can be adjusted through changes in the properties of one ureayl N-H bond. This modularity is achieved by appending a phenyl ring with different parasubstituents from one ureayl NH group. The ligands have been used to prepare a series of Mn IIIoxido complexes and a Hammett correlation was found between the pK a values of the complexes and the substituents on the phenyl ring that was explained within the context of changes to the Hbonds involving the Mn III-oxido unit. The complexes were tested for their reactivity toward 9,10dihydroanthracene (DHA) and a Hammett correlation was found between the second-order rate constants for the reactions and the pK a values. Studies to determine activation parameters and the kinetic isotope effects are consistent with a mechanism in which rate-limiting proton transfer is an important contributor. However, additional reactivity studies with xanthene found a significant increase in the rate constant compared to DHA, even though the substrates have the same pK a (C-H) values. These results suggest do not support a discrete proton-transfer/electron transfer process, but rather an asynchronous mechanism in which the proton and electron are transferred unequally at the transition state.

No abstract

Metalloproteins contain actives sites with intricate structures that perform specific functions with high selectivity and efficiency. The complexity of these systems complicates the study of their function and the understanding of the properties that give rise to their reactivity. One approach that has contributed to the current level of understanding of their biological function is the study of synthetic constructs that mimic one or more aspects of the native metalloproteins. These systems allow individual contributions to the structure and function to be analyzed and also permit spectroscopic characterization of the metal cofactors without complications from the protein environment. This Current Topics is a review of synthetic constructs as probes for understanding the biological activation of small molecules. These topics are developed from the perspective of seminal molecular design breakthroughs from the past that provide the foundation for the systems used today.

High valent Fe–OH species are often invoked as key intermediates but have only been observed in Compound II of cytochrome P450s. To further address the properties of non-heme FeIV–OH complexes we demonstrate the reversible protonation of a synthetic FeIV–oxo species containing a tris-urea tripodal ligand. The same protonated FeIV–oxo species can be prepared via oxidation, suggesting a putative FeV–oxo species was initially generated. Computational, Mössbauer, XAS, and NRVS studies indicate that protonation of the FeIV–oxo complex most likely occur on the tripodal ligand, which undergoes a structural change that results in the formation of a new intramolecular hydrogen bond with the oxido ligand that aids in stabilizing the protonated adduct. We suggest that similar species for protonated high valent Fe–oxo species may occur in the active sites of proteins. This finding further argues for caution when assigning unverified high valent Fe–OH species to mechanisms.

Organic diradicals are uncommon species that have been intensely studied for their unique properties and potential applicability in a diverse range of innovative fields. While there is a growing class of stable and well characterized organic diradicals, there has been recent focus on how diradical character can be controlled or modulated with external stimuli. Here we demonstrate that a diiron complex bridged by the doubly oxidized ligand tetrathiafulvalene-2,3,6,7tetrathiolate (TTFtt 2−) undergoes a thermally induced Fe-centered spin-crossover which yields significant diradical character on TTFtt 2−. UV-vis-Near-IR, Mössbauer, NMR, and EPR spectroscopies with magnetometry, crystallography, and advanced theoretical treatments suggest that this diradical character arises from a shrinking TTFtt 2− π-manifold from the Fe(II)-centered spin-crossover. The TTFtt 2− centered diradical is predicted to have a singlet ground state by theory and variable temperature EPR. This unusual phenomenon demonstrates that inorganic spin transitions can be used to modulate organic diradical character. Results and Discussion Synthesis and Structural Parameters Complex 1 was synthesized via reaction with the deprotected proligand 2,3,6,7-tetrakis(2cyanoethylthio)tetrathiafulvalene (TTFtt(C2H4CN)4) in good yield. Complex 1 was insoluble in all solvents we investigated which precluded detailed characterization but is pure as indicated by combustion analysis and behaves as a suitable synthon for subsequent chemistry. Complex 1 can be doubly oxidized with [Cp2Fe][BAr F 4] to form 2 which is more soluble, enabling common solution characterization including 1 H NMR and cyclic voltammetry measurements (Figure S1-S2). Oxidation from 1 to 2 could be ligandcentered (TTFtt 4− →TTFtt 2−), metal-centered (2 Fe(II)→2 Fe(III)), or some intermediate case, but the data acquired for 2 supports a TTFtt 2− structure arising from ligandcentered oxidation (Chart 1B, see below). Compound 2 was structurally characterized via singlecrystal X-ray diffraction (SXRD) at 293 K (2-HT; Figure S3) and 100 K (2-LT; Figure 1). In both structures TTFtt 2− is bridged between two TPA-capped Fe centers with two outer-sphere BAr F 4 − counter anions. The most striking difference between these temperatures is markedly longer Fe bond lengths in 2-HT. The Fe-Npyridine and Fe-Namine bond lengths in 2-LT are 1.958(6)-1.979(6) and 2.017(6) Å (Figure 1), respectively. These values are consistent with Fe-N bonds in other low-spin complexes with a Fe-TPA moiety. 16,17 In 2-HT, these bonds are 0.18-0.19 and 0.244(11) Å longer than their counterparts at 100 K, respectively, and are consistent with high-spin Fe-TPA complexes. The shorter Fe bonds at lower temperature indicate that 2 exhibits a temperature dependent spincrossover as observed in related compounds. 16,21

X-ray absorption spectroscopy at the L-edge of 3d transition metals provides unique information on the local metal charge and spin states by directly probing 3d-derived molecular orbitals through 2p-3d transitions. However, this soft x-ray technique has been rarely used at synchrotron facilities for mechanistic studies of metalloenzymes due to the difficulties of x-ray-induced sample damage and strong background signals from light elements that can dominate the low metal signal. Here, we combine femtosecond soft x-ray pulses from a free-electron laser with a novel x-ray fluorescence-yield spectrometer to overcome these difficulties. We present L-edge absorption spectra of inorganic high-valent Mn complexes (Mn ∼ 6–15 mmol/l) with no visible effects of radiation damage. We also present the first L-edge absorption spectra of the oxygen evolving complex (Mn4CaO5) in Photosystem II (Mn < 1 mmol/l) at room temperature, measured under similar conditions. Our approach opens new ways to study metalloenzymes under functional conditions.