This review discusses the characterisation of natural organic dyestuffs of historical interest by liquid chromatography-mass spectrometry. The structures of the most important natural organic dyestuffs traditionally used are presented and discussed from the perspective of their analytical chemical determination. The practical aspects of the determination of this inhomogeneous range of compounds with different structures, such as anthraquinones, flavonoids, indigoids or tannins, are discussed with their implications for sample preparation, liquid chromatographic separation and mass spectrometric detection. The particular focus of this review is the discussion of the mass spectral fragmentation patterns of the different classes of natural organic dyestuffs, which in the ideal case allow the identification of the dyestuff actually used, and thereby provide a key to the better characterisation and understanding of historical objects dyed with natural organic dyestuffs.

No abstract

This review discusses the various aspects of the bio-geochemistry of germanium, and of its technological, economical and environmental importance. Despite the relatively low annual production and consumption of this semi-metal (ca. 80 metric tons/a) there are important technological applications of this element in the semiconductor, infrared optics and fibre optics/telecommunication industries. A small, but not insignificant fraction of this element is used for the production of pharmaceuticals and nutritional supplements, although its actual merits have not been fully demonstrated yet, while they are opposed to chronic toxicity of the element when being administrated at relatively high doses for an extended period of time. Neither the exact mechanism of action in the case of cancer treatment or the treatment of infectious diseases is known, nor the reason for the toxicity of inorganic species of this element. In plants, Ge can partially substitute for B in the case of boron deficiency, although deficiency symptoms are still seen with a lag period of ca. one to three weeks. In biogeochemical respect, germanium and silicon react very similar, as if Ge were a very heavy isotope of Si. Their molar ratio is typically in the order of 0.6 9 10 -6 , with significant deviations only where germanium is complexed and transported, e.g., by humic-rich waters. Germanium is a very conservative element in biogeochemical terms: It hardly shows involvement in any biogeochemical reaction cycles and is mainly present in the form of complexes or hydroxo-compounds of the tetravalent germanium. The only naturally occurring organogermanium compounds are mono-and dimethylgermanium which are believed to be formed by microbiological activity in continental zones containing Ge-rich minerals, and then are leached into rivers, and finally into the open sea. It becomes evident that, although very sophisticated technological uses of germanium exist, a better understanding of its biogeochemical importance, cycling and reactivity must still be developed.

No abstract

High performance capillary electrophoresis (HPCE) as well as high performance liquid chromatography-mass spectrometry (HPLC-MS) have been applied to the separation, identification and quantification of the tumor-inhibiting ruthenium compounds HIm trans-[RuCl4(im)2] (im = imidazole) and HInd trans-[RuCl4(ind)2] (ind = indazole) and their hydrolysis products. The half-lives for the hydrolytic decomposition of the Ru(III) compounds were determined by monitoring the relative decrease of the original complex anion under different conditions by means of capillary electrophoresis. The decomposition follows pseudo-first-order kinetics. The rate constants in water at 25 degrees C are 1.102 +/- 0.091 x 10(-5) s-1 for HIm trans-[RuCl4(im)2] and 0.395 +/- 0.014 x 10(-5) s-1 for HInd trans-[RuCl4(ind)2]. About 8% of HIm trans-[RuCl4(im)2] but only about 2% of HInd trans-[RuCl4(ind)2] were hydrolyzed after 1 h at room temperature. Whereas the hydrolysis rate of the imidazole complex is independent of the pH value, the indazole complex hydrolyzes much faster at higher pH. The half-life of HInd trans-[RuCl4(ind)2] in phosphate buffer at pH 6.0 and 37 degrees C is 5.4 h, whereas it is less than 0.5 h at pH 7.4. In contrast to the imidazole complex, where no dependence on the buffer system was observed, hydrolysis of the indazole complex is even faster if a buffer containing hydrogen carbonate is used. The formation of [RuCl2(H2O)2(im)2]+ could be demonstrated by HPLC-MS measurements. In the case of the indazole complex, a release of the indazole ligands results in the formation of [RuCl4(H2O)2]-.

A new method for on-line monitoring of fermentations using mid-infrared (MIR) spectroscopy has been developed. The method has been used to predict the concentrations of glucose and ethanol during a baker's yeast fermentations. A completely automated flow system was employed as an interface between the bioprocess under study and the Fourier transform infrared (FT-IR) spectrometer, which was equipped with a flow cell housing a diamond attenuated total reflection (ATR) element. By using the automated flow system, experimental problems related to adherence of CO(2) bubbles to the ATR surface, as well as formation of biofilms on the ATR surface, could be efficiently eliminated. Gas bubbles were removed during sampling, and by using rinsing steps any biofilm could be removed from the ATR surface. In this way, constant measuring conditions could be guaranteed throughout prolonged fermentation times (approximately 8 h). As a reference method, high-performance liquid chromatography (HPLC) with refractive index detection was used. The recorded data from different fermentations were modeled by partial least-squares (PLS) regression comparing two different strategies for the calibration. On the one hand, calibration sets were constructed from spectra recorded from either synthetic standards or from samples drawn during fermentation. On the other hand, spectra from fermentation samples and synthetic standards were combined to form a calibration set. Differences in the kinetics of the studied fermentation processes used for calibration and prediction, as well as the precision of the HPLC reference method, were identified as the main chemometric sources of error. The optimal PLS regression method was obtained using the mixed calibration set of samples from fermentations and synthetic standards. The root mean square errors of prediction in this case were 0.267 and 0.336 g/L for glucose and ethanol concentration, respectively.

A new liquid chromatographic method for the efficient separation of aromatic compounds having a wide range of sizes, molecular structures, and polarities has been developed. Based on a phenyl-modified silica reversed stationary phase and a methanol-water solvent gradient, it allows the separation of mono- and polycyclic aromatic hydrocarbons (PAHs) having up to five condensed aromatic rings and partially oxidized derivatives within a single chromatographic run of 40-min duration. The applicability of the method is demonstrated using 81 reference substances (PAHs, phenols, quinones, acids, lactones, esters, etc.) and real samples of environmental, medical, and technical relevance (ozonized PAHs, lake water, human urine, diesel exhaust condensates). The retention times of the investigated aromatics exhibit a regular increase with molecular mass and a systematic decrease with increasing number and polarity of functional groups. In case of intramolecular hydrogen bonding, a positive shift of retention time provides additional structural information. The combination of chromatographic retention time with the molecular mass and structural information from mass spectrometric detection allows the tentative identification of unknown aromatic analytes at trace levels, even without specific reference substances. With atmospheric pressure chemical ionization (APCI), low detection limits and highly informative fragmentation patterns can be obtained by in-source collision-induced fragmentation in a single-quadrupole LC-APCI-MS system as applied in this study, and multidimensional MS experiments are expected to further enhance the potential of the presented method.

No abstract