The cost effective synthesis and patterning of carbon nanomaterials is a challenge in electronic and energy storage devices. Here we report a one-step, scalable approach for producing and patterning porous graphene films with three-dimensional networks from commercial polymer films using a CO 2 infrared laser. The sp 3 -carbon atoms are photothermally converted to sp 2 -carbon atoms by pulsed laser irradiation. The resulting laserinduced graphene (LIG) exhibits high electrical conductivity. The LIG can be readily patterned to interdigitated electrodes for in-plane microsupercapacitors with specific capacitances of 44 mF cm À 2 and power densities of B9 mWcm À 2 . Theoretical calculations partially suggest that enhanced capacitance may result from LIG's unusual ultra-polycrystalline lattice of pentagon-heptagon structures. Combined with the advantage of one-step processing of LIG in air from commercial polymer sheets, which would allow the employment of a roll-to-roll manufacturing process, this technique provides a rapid route to polymer-written electronic and energy storage devices.

Reduction of water to hydrogen through electrocatalysis holds great promise for clean energy, but its large-scale application relies on the development of inexpensive and efficient catalysts to replace precious platinum catalysts. Here we report an electrocatalyst for hydrogen generation based on very small amounts of cobalt dispersed as individual atoms on nitrogen-doped graphene. This catalyst is robust and highly active in aqueous media with very low overpotentials (30 mV). A variety of analytical techniques and electrochemical measurements suggest that the catalytically active sites are associated with the metal centres coordinated to nitrogen. This unusual atomic constitution of supported metals is suggestive of a new approach to preparing extremely efficient single-atom catalysts.

In this research, we constructed a controlled chamber pressure CVD (CP-CVD) system to manipulate graphene's domain sizes and shapes. Using this system, we synthesized large (~4.5 mm(2)) single-crystal hexagonal monolayer graphene domains on commercial polycrystalline Cu foils (99.8% purity), indicating its potential feasibility on a large scale at low cost. The as-synthesized graphene had a mobility of positive charge carriers of ~11,000 cm(2) V(-1) s(-1) on a SiO(2)/Si substrate at room temperature, suggesting its comparable quality to that of exfoliated graphene. The growth mechanism of Cu-based graphene was explored by studying the influence of varied growth parameters on graphene domain sizes. Cu pretreatments, electrochemical polishing, and high-pressure annealing are shown to be critical for suppressing graphene nucleation site density. A pressure of 108 Torr was the optimal chamber pressure for the synthesis of large single-crystal monolayer graphene. The synthesis of one graphene seed was achieved on centimeter-sized Cu foils by optimizing the flow rate ratio of H(2)/CH(4). This work should provide clear guidelines for the large-scale synthesis of wafer-scale single-crystal graphene, which is essential for the optimized graphene device fabrication.

Coal is the most abundant and readily combustible energy resource being used worldwide. However, its structural characteristic creates a perception that coal is only useful for producing energy via burning. Here we report a facile approach to synthesize tunable graphene quantum dots from various types of coal, and establish that the unique coal structure has an advantage over pure sp 2 -carbon allotropes for producing quantum dots. The crystalline carbon within the coal structure is easier to oxidatively displace than when pure sp 2 -carbon structures are used, resulting in nanometre-sized graphene quantum dots with amorphous carbon addends on the edges. The synthesized graphene quantum dots, produced in up to 20% isolated yield from coal, are soluble and fluorescent in aqueous solution, providing promise for applications in areas such as bioimaging, biomedicine, photovoltaics and optoelectronics, in addition to being inexpensive additives for structural composites.

In this paper, we demonstrate that by simple laser induction, commercial polyimide films can be readily transformed into porous graphene for the fabrication of flexible, solid-state supercapacitors. Two different solid-state electrolyte supercapacitors are described, namely vertically stacked graphene supercapacitors and in-plane graphene microsupercapacitors, each with enhanced electrochemical performance, cyclability, and flexibility. Devices with a solid-state polymeric electrolyte exhibit areal capacitance of >9 mF/cm2 at a current density of 0.02 mA/cm2, more than twice that of conventional aqueous electrolytes. Moreover, laser induction on both sides of polyimide sheets enables the fabrication of vertically stacked supercapacitors to multiply its electrochemical performance while preserving device flexibility.

The scarcity and high cost of platinum-based electrocatalysts for the oxygen reduction reaction (ORR) has limited the commercial and scalable use of fuel cells. Heteroatom-doped nanocarbon materials have been demonstrated to be efficient alternative catalysts for ORR. Here, graphene quantum dots, synthesized from inexpensive and earth-abundant anthracite coal, were self-assembled on graphene by hydrothermal treatment to form hybrid nanoplatelets that were then codoped with nitrogen and boron by high-temperature annealing. This hybrid material combined the advantages of both components, such as abundant edges and doping sites, high electrical conductivity, and high surface area, which makes the resulting materials excellent oxygen reduction electrocatalysts with activity even higher than that of commercial Pt/C in alkaline media.

Many diseases are associated with oxidative stress, which occurs when the production of reactive oxygen species (ROS) overwhelms the scavenging ability of an organism. Here, we evaluated the carbon nanoparticle antioxidant properties of poly(ethylene glycolated) hydrophilic carbon clusters (PEG-HCCs) by electron paramagnetic resonance (EPR) spectroscopy, oxygen electrode, and spectrophotometric assays. These carbon nanoparticles have 1 equivalent of stable radical and showed superoxide (O 2•− ) dismutase-like properties yet were inert to nitric oxide (NO • ) as well as peroxynitrite (ONOO − ). Thus, PEG-HCCs can act as selective antioxidants that do not require regeneration by enzymes. Our steadystate kinetic assay using KO 2 and direct freeze-trap EPR to follow its decay removed the rate-limiting substrate provision, thus enabling determination of the remarkable intrinsic turnover numbers of O 2 •− to O 2 by PEG-HCCs at >20,000 s −1 . The major products of this catalytic turnover are O 2 and H 2 O 2 , making the PEG-HCCs a biomimetic superoxide dismutase.superoxide | antioxidant | carbon nanoparticles | hydrophilic carbon clusters | superoxide dismutase mimetic R eactive oxygen species (ROS), such as superoxide (O 2 •− ), hydrogen peroxide (H 2 O 2 ), organic peroxides, and hydroxyl radical ( • OH), are a consequence of aerobic metabolism (1, 2). These ROS are necessary for the signaling pathways in biological processes (3, 4) such as cell migration, circadian rhythm, stem cell proliferation, and neurogenesis (5). In healthy systems, ROS are efficiently regulated by the defensive enzymes superoxide dismutase (SOD) and catalase, and by antioxidants such as glutathione, vitamin A, ascorbic acid, uric acid, hydroquinones, and vitamin E (6). When the production of ROS overwhelms the scavenging ability of the defense system, oxidative stress occurs, causing dysfunctions in cell metabolism (7)(8)(9)(10)(11)(12)(13)(14)(15)(16).In addition to ROS, reactive nitrogen species (RNS) such as nitric oxide (NO • ), nitrogen dioxide, and dinitrogen trioxide can be found in all organisms. NO • can act as an oxidizing or reducing agent depending on the environment (17), is more stable than other radicals (half-life 4-15 s) (18), and is synthesized in small amounts in vivo (17)(18)(19)(20)(21)(22). NO • is a potent vasodilator and has an important role in neurotransmission and cytoprotection (17,18,22,23). Owing to its biological importance and the low concentration found normally in vivo, it is often important to avoid alteration of NO • levels in biological systems to prevent aggravation of acute pathologies including ischemia and reperfusion.One way to treat these detrimental pathologies is to supply antioxidant molecules or particles that renormalize the disturbed oxidative condition. We recently developed a biocompatible carbon nanoparticle, the poly(ethylene glycolated) hydrophilic carbon cluster (PEG-HCC), which has shown ability to scavenge oxyradicals and protect against oxyradical damage in rodent models and thus far h...

As the cylindrical sp2-bonded carbon allotrope, carbon nanotubes (CNTs) have been widely used to reinforce bulk materials such as polymers, ceramics, and metals. However, both the concept demonstration and the fundamental understanding on how 1D CNTs reinforce atomically thin 2D layered materials, such as graphene, are still absent. Here, we demonstrate the successful synthesis of CNT-toughened graphene by simply annealing functionalized CNTs on Cu foils without needing to introduce extraneous carbon sources. The CNTs act as reinforcing bar (rebar), toughening the graphene through both π–π stacking domains and covalent bonding where the CNTs partially unzip and form a seamless 2D conjoined hybrid as revealed by aberration-corrected scanning transmission electron microscopy analysis. This is termed rebar graphene. Rebar graphene can be free-standing on water and transferred onto target substrates without needing a polymer-coating due to the rebar effects of the CNTs. The utility of rebar graphene sheets as flexible all-carbon transparent electrodes is demonstrated. The in-plane marriage of 1D nanotubes and 2D layered materials might herald an electrical and mechanical union that extends beyond carbon chemistry.