Uranyl peroxide cluster species were produced in aqueous solution by the treatment of uranyl nitrate with hydrogen peroxide, lithium hydroxide, and potassium chloride. Ultrafiltration of these cluster species using commercial sheet membranes with molecular mass cutoffs of 3, 8, and 20 kDa (based on polyethylene glycol) resulted in U rejection values of 95, 85, and 67% by mass, respectively. Ultrafiltration of untreated uranyl nitrate solutions using these membranes resulted in virtually no rejection of U. These results demonstrate the ability to use the filtration of cluster species as a means for separating U from solutions on the basis of size. Small-angle X-ray scattering, Raman spectroscopy, and electrospray ionization mass spectrometry confirmed the presence of uranyl peroxide cluster species in solution and were used to characterize their size, shape, and dispersity.

No abstract

Current separation and purification technologies utilized in the nuclear fuel cycle rely primarily on liquid-liquid extraction and ion-exchange processes. Here, we report a laboratory-scale aqueous process that demonstrates nanoscale control for the recovery of uranium from simulated used nuclear fuel (SIMFUEL). The selective, hydrogen peroxide induced oxidative dissolution of SIMFUEL material results in the rapid assembly of persistent uranyl peroxide nanocluster species that can be separated and recovered at moderate to high yield from other process-soluble constituents using sequestration-assisted ultrafiltration. Implementation of size-selective physical processes like filtration could results in an overall simplification of nuclear fuel cycle technology, improving the environmental consequences of nuclear energy and reducing costs of processing.

Neptunium-237 is a radionuclide of great interest owing to its long half-life (2.14 × 10(6) years) and relative mobility as the neptunyl ion (NpO2(+)) under many surface and groundwater conditions. Reduction to tetravalent neptunium (Np(IV)) effectively immobilizes the actinide in many instances due to its low solubility and strong interactions with natural minerals. One such mineral that may facilitate the reduction of neptunium is magnetite (Fe(2+)Fe(3+)2O4). Natural magnetites often contain titanium impurities which have been shown to enhance radionuclide sorption via titanium's influence on the Fe(2+)/Fe(3+) ratio (R) in the absence of oxidation. Here, we provide evidence that Ti-substituted magnetite reduces neptunyl species to Np(IV). Titanium-substituted magnetite nanoparticles were synthesized and reacted with NpO2(+) under reducing conditions. Batch sorption experiments indicate that increasing Ti concentration results in higher Np sorption/reduction values at low pH. High-resolution transmission electron microscopy of the Ti-magnetite particles provides no evidence of NpO2 nanoparticle precipitation. Additionally, X-ray absorption spectroscopy confirms the nearly exclusive presence of Np(IV) on the titanomagnetite surface and provides supporting data indicating preferential binding of Np to terminal Ti-O sites as opposed to Fe-O sites.

Hybrid uranyl-vanadium oxide clusters intermediate between transition metal polyoxometalates and uranyl peroxide cage clusters were obtained by dissolving uranyl nitrate in the ionic liquid 3-ethyl-1-methylimidazolium ethyl sulfate mixed with an aqueous solution containing vanadium. Where sulfate was present, wheel-shaped {U20V20} crystallized and contains ten sulfate tetrahedra, and in the absence of added sulfate, {U2V16}, a derivative of {V18}, was obtained.

An automated, miniaturized, off-line separation technique is presented here using an Elemental Scientific Inc. microFAST MC system with UTEVA resin to extract the uranium matrix from its trace element impurities in aqueous media. The collected fractions were analyzed for ~ 30 trace elements using inductively coupled plasma - optical emission spectroscopy. Ten replicate samples were processed with a single column resulting in precision ranging from 3.3% to 6.2% relative standard deviation with regards to the trace element recoveries. Accuracy, with respect to trace element concentrations in the UO Certified Reference Material 124-1, resulted in an average of 13.9% relative deviation while accuracy to the Canadian UO reference material, CUP-2, resulted in an average relative deviation of 8.6%. The total separation time of this automated process was reduced to ~ 30 min per sample while employing a 0.5 mL UTEVA chromatographic resin bed and 2.5 mg of uranium.

A portable handheld laser-induced breakdown spectroscopy (HH LIBS) instrument was evaluated as a rapid method to qualitatively analyze rare earth elements in a uranium oxide matrix. This research is motivated by the need for development of a method to perform rapid, at-line chemical analysis in a nuclear facility, particularly to provide a rapid first pass analysis to determine if additional actions or measurements are warranted. This will result in the minimization of handling and transport of radiological and nuclear material and subsequent exposure to their associated hazards. In this work, rare earth elements (Eu, Nd, and Yb) were quantitatively spiked into a uranium oxide powder and analyzed by the HH LIBS instrumentation. This method demonstrates the ability to rapidly identify elemental constituents in sub-percent levels in a uranium matrix. Preliminary limits of detection (LODs) were determined with values on the order of hundredths of a percent. Validity of this methodology was explored by employing a National Institute of Standards and Technology (NIST) standard reference materials (SRM) 610 and 612 (Trace Elements in Glass). It was determined that the HH LIBS method was able to clearly discern the rare earths elements of interest in the glass or uranium matrices.

The first four uranyl peroxide compounds containing ethylenediaminetetra-acetate (EDTA) were synthesized and characterized from aqueous uranyl peroxide nitrate solutions with a pH range of 5-7. Raman spectra demonstrated that reaction solutions that crystallized [NaK15[(UO2)8(O2)8(C10H12O10N2)2(C2O4)4]·(H2O)14] (1) and [Li4K6[(UO2)8(O2)6(C10H12O10N2)2(NO3)6]·(H2O)26] (2) contained excess peroxide, and their structures contained oxidized ethylenediaminetetraacetate, EDTAO2(4-). The solutions from which [K4[(UO2)4(O2)2(C10H13O8N2)2(IO3)2]·(H2O)16] (3) and LiK3[(UO2)4(O2)2(C10H12O8N2)2(H2O)2]·(H2O)18 (4) crystallized contained no free peroxide, and the structures incorporated intact EDTA(4-). In contrast to the large family of uranyl peroxide cage clusters, coordination of uranyl peroxide units in 1-4 by EDTA(4-) or EDTAO2(4-) results in isolated tetramers or dimers of uranyl ions that are bridged by bidentate peroxide groups. Two tetramers are bridged by EDTAO2(4-) to form octamers in 1 and 2, and dimers of uranyl polyhedra are linked through iodate groups in 3 and EDTA(4-) in 4, forming chains in both cases. In each structure the U-O2-U dihedral angle is strongly bent, at ∼140°, consistent with the configuration of this linkage in cage clusters and other recently reported uranyl peroxides.