La propuesta presentada en el estudio busca ajustar el rango usado tradicionalmente para la aplicación del torque en el proceso de capsulado en bebidas carbonatadas. Se ha logrado identificar, mediante el uso de indicadores y pruebas estadísticas, que el proceso de producción efectivamente tenía un descontrol. Se aplicó un diseño experimental por bloques con el fin de identificar el efecto principal que tiene el rango nuevo, el cual ha sido propuesto por la investigación, dentro de las capsuladoras. Mediante el uso de un modelo de regresión lineal y de variables de control de tipo Dummy, las cuales describan características específicas de cada una de las capsuladoras, se ha logrado el efecto limpio, o también considerado neto, sobre cada una de las capsuladoras y el torque aplicado a ellas. Disminuyendo de ésta manera la variabilidad presente en el proceso de capsulado en la elaboración de bebidas carbonatadas. Palabras Clave: torque, variabilidad, encapsulado, estadística paramétrica. Referencias [1]E. Córdova y L. Rodríguez, «Universidad Católica Andrés Bello,» MARZO 2016. [En línea]. [Último acceso: 04 julio de 2020]. [2]S. López, D. Pincay y J. Silva, «Diseño de un Sistema de Control Estadístico del Proceso de Encapsulado,» 8 Noviembre 2016. [En línea]. Disponible en: http://www.dspace.espol.edu.ec/xmlui/bitstream/handle/123456789/36333/D-CD88338.pdf?sequence=-1&isAllowed=y. [Último acceso: 2 julio 2020]. [3]E. Malvais y R. Delgado, «Universidad Autónoma del Estado de México,» MAYO 2017. [En línea]. [Último acceso: 04 julio 2020]. [4]J. Fermín, S. Valdivieso, M. Orlandoni y G. Barreto, «Control estadístico de procesos multivariantes en la industria Alimentaria: implementación a través del estadístico t2-hotelling,» Agroalimentaria, vol. 1, nº ISSN 1316-0354, 2010. [5]A. Pineda y A. Cecilia, «Universidad Veracruzana,» agosto 2019. [En línea]. [Último acceso: 04 julio 2020]. [6]M. Gras, «Estimación estadística, modelado y análisis de la transmisión y coste de la variabilidad en procesos multi - etapa. Aplicación en la fábrica de baldosas cerámicas.,» Marzo 2010. [En línea]. Disponible en: https://d1wqtxts1xzle7.cloudfront.net/56452330/Tesis_doctoral.pdf?1525041898=&response-content-disposition=inline%3B+filename%3DTesis_doctoral.pdf&Expires=1593745763&Signature=V77nsxCSH-1IuOu4~78gq-CM8Hk3nm5mHLtSCG7YIToMFDskiPxu9TZfiXlX4gbXAHCkrg-pU0BRSsB. [Último acceso: julio 2020]. [7]M. Palacios y V. Gisbert, «Control Estadística de la calidad: Una aplicación práctica,» 3 Ciencias, vol. 1, p. 22, 2018. [8]G. Martínez y A. Sobenis, «ESPOL, Determinación de la durabilidad de una resina de DE tereftalato de polietileno, Af - 626, en envases retornables por inyección para bebidas carbonatadas de alta rotación.,» Mayo 2014. [En línea]. Disponible en: http://www.dspace.espol.edu.ec/xmlui/handle/123456789/30685.[Último acceso: 04 julio 2020]. [9]A. Navarro, E. Jiménez, S. Rapport y B. Thoilliez, «Fundamentos de la investigación y la innovación educativa,» UNIR EDITORIAL, vol. 1, p. 106, 2017.
ResumenEl principal objetivo de este estudio, es obtener una efectiva reducción del tamaño de partícula y de grano de un polvo de hierro nanoestructurado mediante la molturación mecánica en diferentes medios de molienda. La principal dificultad radica en la gran ductilidad del material. Las variables a estudiar en el proceso han sido la velocidad de rotación, la relación polvo/bolas y el porcentaje de agente de control añadido. El polvo se ha estudiado por difracción laser para caracterizar la distribución de tamaños de partículas, microscopía electrónica de barrido (SEM), microscopía electrónica de transmisión (TEM) y difracción de Rayos X. Del estudio comparativo se destaca: la molienda en seco ha dado lugar a una reducción más efectiva tanto del tamaño de partícula (43%) como del tamaño de grano (62%), mientras que en condiciones húmedas se ha conseguido disminuir la cantidad de óxido, así como obtener una distribución más homogé-nea del polvo resultante, aunque la reducción del tamaño de partícula no ha sido tan efectiva; finalmente, los resultados en medio criogénico producen reducciones en tamaños en tiempos más cortos y por tanto resultan prometedores. Palabras claveMolturación mecánica; Deformación plástica; Nanoestructura; DRX; Microscopía electrónica. Mechanical milling of a nanostructured ductile iron powder under dry, wet and cryogenic atmospheres AbstractThe main objective of this study, is to obtain an effective particle and grain size reduction of a nanostructured iron powder by mechanical milling under different milling media. One of the main challenges in this study is to work with this material of great ductility.The variables of the study to be optimized have been the following: speed of rotation, powder to ball ratio (PBR) and the percentage of control agent to induce an effective powder fracturing in front of cold welding. The powder has been characterized by a Laser Diffraction Particle Size Analyser, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) and, X-ray diffraction.Through the comparative study, it is found that operating under dry milling conditions: there is a more effective particle size reduction of 43 % and grain size reduction of 62 %. In wet conditions has been reduced the amount of oxide, as well as to obtain a more homogenous distribution of the resulting powder. The results under cryogenic media is presented as promising.
Las continuas aplicaciones de fungicidas químicos en los cultivos a menudo son cada vez dañinas tanto para la salud de las personas y animales como para el ambiente. De acuerdo a esta problemática se realizó una investigación para evaluar el efecto de extractos naturales a partir de Azaridachta indico y Eucaliptus spp, frente a Aspergillus terreus como medida de protección ambiental. Se realizaron 5 tratamientos, (1) A. indico (2) Eucaliptus spp. (3) Mezcla de extractos (4) Testigo Control y (5) fungicida químico Skul. El fungicida químico tuvo 100% de efectividad. Entre los extractos naturales la mezcla fue la más efectiva para inhibir el crecimiento de A. terreus. Siendo una alternativa agroecológica para cultivos con problemas fitosanitarios. Palabras Clave: aspergillus, eucalipto, neem, fungicidas químicos. Referencias [1]R. Riccioppo, «Agroquímicos,» 2011. [En línea]. Disponible en: http://www.colmed7.org.ar/files/Trabajos/AGROQUIMICOS.pdf. [Último acceso: enero de 2020] [2]Ministerio de Salud, Secretaría de Ambiente y Desarrollo Sustentable, «La problemática de los agroquímicos y sus envases, su incidencia en la salud.,» Gráfica Laf S.R.L, Buenos Aires, 2007. [3]FAO, «El estado mundial de la agricultura y la alimentación,» 2016. [En línea]. Disponible en: http://www.fao.org/3/a-i6030s.pdf. [Último acceso: enero de 2020] [4]FAO, «Anuario Estadistico de la FAO,» La Alimentacion y la Agricultura en America Latina y El Caribe, p. p10, 2014. [5]FAO, «Anuario Estadistico de la FAO,» La Alimentacion y la Agricultura en Ameria Latina y el Caribe, pp. p134-135, 2014. [6]INEC, «Encuesta sobre Uso de Agroquímicos y su Destino Final en la Agricultura,» 2012. [En línea]. Disponible en: http://www.ecuadorencifras.gob.ec/wp-content/descargas/Presentaciones/Plaguicidas.pdf. [Último acceso: enero de 2020] [7]INEC, «Encuesta de Superficie y Producción Agropecuaria Continua,» 2016. [En línea]. Disponible en: http://www.ecuadorencifras.gob.ec/documentos/web-inec/Encuestas_Ambientales/Informacion_ambiental_en_la_agricultura/2016/PRESENTACION_AGRO_AMBIENTE_2016.pdf. [Último acceso: enero de 2020] [8]El Universo , «Agricultores, en riesgo por el uso de los agroquímicos,» Domingo Mayo 2015. [En línea]. Disponible en: https://www.eluniverso.com/noticias/2015/05/10/nota/4853501/agricultores-riesgo-uso-agroquimicos. [Último acceso: enero de 2020] [9]El Telégrafo, «Mal uso de agroquímicos afecta a la salud y el medio ambiente,» Economía, 04 Febrero 2012. [10]V. Aguirre, M. Anrango, V. Delgado y N. Díaz,«Centro de Investigaciones CientÍficas ESPE,» 22 Noviembre 2012. [En línea]. Disponible en: https://repositorio.espe.edu.ec/bitstream/21000/6845/1/AC-B-ESPE-034935.pdf. [Último acceso: enero de 2020] [11]Minitab, «Método de Tukey para Comparaciones Múltiples,» 2017. [En línea]. Disponible en: https://support.minitab.com/es-mx/minitab/18/help-and-how-to/modeling-statistics/anova/supporting-topics/multiple-comparisons/what-is-tukey-s-method/. [Último acceso: enero de 2020] [12]J. Cruz, «Eucalipto,» 2007. [En línea]. Disponible en: http://www.agaetespacioweb.com/EUCALIPTO%20TEXTO%20Y%20FOTOGRAF%C3%8DA%20COMPUESTO-OK.pdf. [Último acceso: enero de 2020] [13]C. Estrella, «Impregnación de aceite de Neem en soporte textil para combatir la mosca de la fruta Anastrepha striata,» Febrero 2017. [En línea]. Disponible en:http://bibdigital.epn.edu.ec/bitstream/15000/17404/1/CD-7905.pdf. [Último acceso: enero de 2020]
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.