Diffusion-weighted MR imaging can help differentiate benign from malignant hepatic lesions. The use of two b values in one direction could be sufficient for the design of MR sequences in the liver.

Purpose:To evaluate the feasibility and precision of magnetic resonance imaging (MRI) thermometry for monitoring radiofrequency (RF) liver ablation in vivo and predicting the size of the ablation zone.Materials and Methods: At 1.5T, respiratory-triggered real-time MR temperature mapping (the proton resonance frequency (PRF) method) was used to monitor RF ablation in rabbit liver (N ϭ 6) under free breathing. The size of the ablation zones, as assessed by histological analyses, was compared with that predicted from MR thermal dose (TD) maps or derived from conventional T1-weighted (T1w), T2-weighted (T2w), and T1w gadolinium (Gd)-enhanced (T1w-Gd) images acquired immediately after the ablation, and on days 4 and 8 postprocedure.Results: MR temperature uncertainty remained under 1-2°C even during RF deposition. The TD maps were shown to be more predictive and precise than the other MR images, with an average predictive precision for the final ablation zone size of about 1 mm as compared to the histologically proven lesion on day 8. Conclusion:Quantitative temperature MRI during RF ablation is feasible and offered a precise indication of the ablation zone size in this preclinical study based on the lethal dose threshold.

RFA induces dynamic changes in magnetic bulk susceptibility in biological tissue, resulting in large and spatially dependent errors of phase-subtraction-only PRFS MRT and unexploitable thermal dose maps. These thermometry artifacts were strongly correlated with the appearance of transient cavitation. A first-order dynamic model of susceptibility provided a useful method for minimizing these artifacts in phantom and ex vivo experiments.

This new fast imaging sequence provides real-time measurement of temperature distribution and displacement at the focus during HIFU ablation. Magn Reson Med 78:1911-1921, 2017. © 2017 International Society for Magnetic Resonance in Medicine.

To assess the effect of field strength on magnetic resonance (MR) images, the same healthy subject was imaged at three field strengths: 0.5, 1.0, and 1.5 T. Imaging was performed with three similarly equipped MR imagers of the same generation and from the same manufacturer. The same imaging sequences were used with identical parameters and without repetition time correction for field strength. Imaging was performed in four anatomic locations: the brain, lumbar spine, knee, and abdomen. Quantitative image analysis involved calculation of signal-to-noise ratio, contrast-to-noise ratio, and relative contrast; qualitative image analysis was performed by four readers blinded to field strength. The results of all of the examinations were considered to be of diagnostic value. In general, signal-to-noise ratio and contrast-to-noise ratio were lowest at 0.5 T and highest at 1.5 T; relative contrast was not related to field strength. At qualitative analysis, images obtained at 1.0 and 1.5 T were superior to images obtained at 0.5 T; qualitative differences were less important in locations where there is motion or high magnetic susceptibility differences between tissues (e.g., the spine and abdomen). However, excellent image quality was obtained with all three field strengths.