The relative permittivity has been measured at audio frequencies and low temperatures for nanocomposites composed of poly(ether imide) (PEI) and BaTiO3 nanoparticles, the nanoparticles in a cavity and polycrystalline BaTiO3. The data at room temperature, for the real part of the relative permittivity versus nanoparticle content of the heat-treated nanocomposites, are found to follow a recently proposed modified Hanai equation. Also, a low-temperature relaxation region (in the vicinity of 20 K) is found in the heat-treated nanocomposites. This relaxation region is also observed in measurements on the nanoparticles packed in a cavity and for the polycrystalline BaTiO3 materials. A relaxation associated with water in the PEI is observed in the as-prepared nanocomposites. Finally, the breakdown strength of the heat-treated nanocomposites is found to decrease as the nanoparticle content increases. Microstructure-level simulations of electric field statistics were carried out and show that matrix field intensification cannot account for all of the variation of breakdown strength with nanoparticle concentration.
The real part of the relative permittivity, ε′, and dielectric loss, tan δ, have been determined at audio frequencies at temperatures from about 5 K to 350 K for nano-composites composed of BaTiO3 nanoparticles and polycarbonate. The room temperature breakdown strength was also measured and thermal analysis, nuclear magnetic resonance and scanning electron microscopy studies were carried out. For some films the nanoparticles were surface-treated (STNP) while for others they were not (UNP). For concentrations of UNP greater than about 3.4 vol. %, ε′ is much larger than expected on the basis of laws of mixing. On the other hand, ε′ for materials made using STNP is well-behaved. Correspondingly, increased loss (ε″ or tan δ) in the vicinity of room temperature is observed for the materials made from UNP. The anomalously large values of relative permittivity and increased loss are attributed to the presence of large aggregates in the materials made using the UNP. For both UNP-and STNP-based materials, the breakdown strength is found to decrease as nanoparticle concentration increases. The breakdown strength for the materials made using STNP is found to be larger for all concentrations than for those containing UNP despite the presence of large aggregates in some of the STNP-based materials. This shows that breakdown is strongly affected by the nanoparticle surfaces and/or the interface layer. It is also found that the breakdown strength for materials made using UNP increases as particle size increases. Finally, variable temperature and pressure proton nuclear magnetic resonance relaxation measurements were made to assess the effect of nanoparticle inclusion on polymer motion, and the effects were found to be very minor.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.