This paper summarizes the comparison of a new tin-coated copper (t-coating Cu) mesh electrode with a graphite plate electrode for potential power generation and biocompatibility in a microbial fuel cell (MFC). The study, which used domestic wastewater, demonstrated that t-coating Cu mesh electrode produced a power density (271 mW/m(2)) approximately three times higher than that produced by a graphite electrode (87 mW/m(2)). Scanning electron microscopy (SEM) results revealed that bacterial morphology on the two electrodes significantly varied. The t-coating Cu mesh electrode surface had higher bacterial diversity because the open three-dimensional macro-mesh structure allowed an excellent electro-biofilm attachment. Kinetic performances evaluated using the Nernst-Monod equation demonstrated that the t-coating Cu mesh electrode had both higher power density and good biocompatibility in a large surface area, high chemical stability, and favorable metallic conductivity.
The aim of this study is to increase the electricity generation capacity of sediment microbial fuel cell (SMFC) using sewage sludge as a substrate source in anode media via an attractive electrode material. For this purpose, several electrochemical and molecular techniques have been employed to evaluate the performance of SMFC. The max power density and charge transfer resistance of SMFC running on sewage sludge were 187 mW/m2 and 84.7 Ω, respectively. The polymerase chain reaction‐denaturing gradient gel electrophoresis (PCR‐DGGE) analysis indicated that bacteria in anode biofilm belonged to the Clostridia, d‐proteobacteria, g‐proteobacteria, and b‐proteobacteria. Scanning electron microscopy and fluorescence in situ hybridization observations demonstrated that a viable biofilm was formed on the anode surface and the abundance of bacteria was significantly higher than archaea. Consequently, this study showed that sewage sludge could be used as a substrate in the anode media of SMFC for producing high power density.
Electrode materials play a key role in enhancing the electricity generation in the microbial fuel cell (MFC). In this study, a new material (Ti-TiO(2)) was used as an anode electrode and compared with a graphite electrode for electricity generation. Current densities were 476.6 and 31 mA/m(2) for Ti-TiO(2) and graphite electrodes, respectively. The PCR-DGGE analysis of enriched microbial communities from estuary revealed that MFC reactors were dominated by Shewanella haliotis, Enterococcus sp., and Enterobacter sp. Bioelectrochemical kinetic works in the MFC with Ti-TiO(2) electrode revealed that the parameters by non-linear curve fitting with the confidence bounds of 95% gave good fit with the kinetic constants of η (difference between the anode potential and anode potential giving one-half of the maximum current density) = 0.35 V, K (s) (Half-saturation constant) = 2.93 mM and J (max) = 0.39 A/m(2) for T = 298 K and F = 96.485 C/mol-e(-). From the results observed, it is clear that Ti-TiO(2) electrode is a promising candidate for electricity generation in MFC.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.