Este é um artigo publicado em acesso aberto (Open Access) sob a licença Creative Commons Attribution Non-Commercial, que permite uso, distribuição e reprodução em qualquer meio, sem restrições desde que sem fins comerciais e que o trabalho original seja corretamente citado.Recebido: 20 Fev., 2018 Aceito: 06 Abr., 2018 E-mail: ascotti@ufu.br (AS)Resumo: Analisou-se a eficácia de um "kit" de limpeza e lubrificação para arames de solda em relação à alimentabilidade do processo MIG/MAG. Soldagens comparativas de simples deposição sobre chapa na posição plana foram feitas, utilizando-se diferentes bicos de contato, assim como diferentes condições da superfície dos arames (normal e não conformes, oxidado e contaminado com detritos). Usou-se para qualificar a alimentabilidade um sistema dedicado constituído de uma célula de carga assistida por um sensor de queda de tensão no bico de contato. A eficácia do "kit" foi verificada pela variação da resistência elétrica do bico de contato e da força de alimentação, assim como pela aparência visual do arame na saída da tocha sem arco. O "kit" demonstrou ser eficaz, fazendo reduzir a força de alimentação sem aumentar a resistência elétrica dos bicos testados. Porém, não foi eficaz quando aplicado sobre um arame oxidado. Conclui-se que o "kit" é eficaz em casos onde o arame está em condições normais de uso ou apenas contaminado com detritos, reduzindo a fricção arame-tocha e facilitando a alimentabilidade do arame, mas não é suficiente para corrigir uma anomalia séria do arame (oxidação). Palavras-chave: GMAW; Automação; Alimentabilidade de arame; Melhorias operacionais. Efficacy Assessment of Wire Cleaning and Lubrification on MIG/MAG FeedabilityAbstract: The efficacy of a cleaning and lubrication kit for welding wires was analysed in relation to the wire feedability in MIG/MAG process. Comparative bead-on-plate welds on flat position were carried out, using different contact tips, as well as different wire surface conditions (normal and non-conforming, oxidized and contaminated with debris). A dedicated system, consisting of a load cell assisted by a voltage drop sensor for the contact tip, was used to qualify the feedability. The effectiveness of the kit was verified by the variation of the contact tip electric resistance and the feeding force, as well as by the visual appearance of the wire without arc . The "kit" showed to be effective, reducing the feeding force without increasing the electrical resistance of the contact tip. However, it was not effective when applied over oxidized wires. It is concluded that the kit is effective in cases where the wire is in normal use or only contaminated with debris, reducing the wire-torch friction and facilitating wire feedability, but it is not sufficient to correct serious anomalies of the wire (oxidation).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.