This paper addresses the problem of steering a fleet of unmanned aerial vehicles along desired three-dimensional paths while meeting stringent spatial and temporal constraints. A representative example is the challenging mission scenario where the unmanned aerial vehicles are tasked to cooperatively execute collision-free maneuvers and arrive at their final destinations at the same time. In the proposed framework, the unmanned aerial vehicles are assigned nominal spatial paths and speed profiles along those, and then the vehicles are requested to execute cooperative path following, rather than open loop trajectory tracking maneuvers. This strategy yields robust behavior against external disturbances by allowing the unmanned aerial vehicles to negotiate their speeds along the paths in response to information exchanged over the supporting communications network. The paper considers the case where the graph that captures the underlying time-varying communications topology is disconnected during some interval of time or even fails to be connected at all times. Conditions are given under which the cooperative path-following closed-loop system is stable. Flight test results of a coordinated road-search mission demonstrate the efficacy of the multi-vehicle cooperative control framework developed in the paper.

No abstract

No abstract

No abstract

No abstract

This paper addresses the problem of time-coordination of a team of cooperating multirotor unmanned aerial vehicles that exchange information over a supporting time-varying network. A distributed control law is developed to ensure that the vehicles meet the desired temporal assignments of the mission, while flying along predefined collision-free paths, even in the presence of faulty communication networks, temporary link losses, and switching topologies. In this paper, the coordination task is solved by reaching consensus on a suitably defined coordination state. Conditions are derived under which the coordination errors converge to a neighborhood of zero. Simulation and flight test results are presented to validate the theoretical findings.Note to Practitioners-This paper presents an approach which enables a fleet of multirotor UAVs to follow a set of desired trajectories and coordinate along them, thus satisfying specific spatial and temporal assignments. The proposed solution can be employed in applications in which multiple vehicles are tasked to execute cooperative, collision-free maneuvers, and accomplish a common goal in a safely manner. An example is sequential monitoring, in which the UAVs have to visit and monitor a set of points of interest, while maintaining a desired temporal separation between each other. In this paper, we also simulate a scenario in which the vehicles, positioned in a square room, are required to exchange position with each other. It is shown that the proposed control algorithm not only ensures that the UAVs arrive at the final destinations at the same time, but also guarantees safety, i.e., the vehicles avoid collision with each other at all times.

This thesis considers the application of L 1 adaptive control methodology to a model of the X-48B Blended Wing Body aircraft. We explicitly verify the performance bounds of the adaptive flight control system at various flight conditions. We demonstrate that the resulting L 1 adaptive controller does not require tuning or redesign from one flight condition to another. Furthermore, once designed according to the theoretical guidelines, the L 1 adaptive controller ensures uniform transient and steady-state performance across the entire flight envelope in the presence of significantly coupled dynamics and control surface failures.ii

No abstract