Permintaan bahan bakar fosil semakin meningkat sementara pasokannya kian berkurang dari waktu ke waktu. Hal ini mendorong untuk mengembangkan sumber energy alternative seperti biomassa sebagai energy baru terbarukan. Biomassa dapat dikonversi menjadi energy alternative dalam bentuk bio-oil melalui proses pirolisis. Komposisi biomassa seperti lignoselulosa (lignin, selulosa dan hemiselulosa) didekomposisi dengan proses pirolisis menjadi komponen organic seperti fenol, alkohol, keton, aldehid dan ester. Bio-oil merupakan bahan bakar terbarukan dan lebih ramah lingkungan dari pada bahan bakar fosil (minyak bumi). Bio-oil dapat disebut sebagai "green energy" dalam banyak aplikasi untuk menggantikan minyak bumi dan juga dapat digunakan sebagai "green chemical". Dalam aplikasinya, bio-oil dapat digunakan sebagai energy ramah lingkungan karena memiliki emisi lebih rendah dari pada bahan bakar fosil. Senyawa fenolik memiliki komposisi paling dominan dalam bio-oil di mana fenol memiliki banyak kegunaan untuk resin, antiseptik, pengawet dan desinfektan. Produksi bio-oil dalam penelitian ini dilakukan dengan proses pirolisis lambat pada reactor dengan kisaran suhu 250-400oC selama 30 menit. Eksperimen ini dilakukan denganbahan baku kulit durian pada ukuran10 mesh dan 20 mesh. Analisia GC-MS digunakan untuk mengetahui komponen bio-oil. Produk bio-oil memiliki viskositas 1,189 cP, dan densitas 1,031 g/cm3 dan pH 6. Bio-oil mengandung beberapak omponen seperti senyawa fenolik (66,37%), metil ester (2,71%), siklridridana (3,66%), benzocycloheptariene (3,39), indole (5,19%), glisin (3,01%), pentadekana (4,07%), 5-tert-butylpyrogallol (3,07%), asam bromoacetic (3,40%) dan asamtetradecanoic (5,16%).
The presence of CO 2 in the syngas is attracting more attention in terms of reducing the greenhouse gas emissions in its utilisation. The aim of this study was to purify syngas from the CO 2 content of fine coal gasification. Fine coal is gasified with and without absorption using CaO, which is hydrated to Ca(OH) 2 in the modified updraft gasifier at 450-700 °C. Apart from investigating the CO 2 absorption process, the gasification process also evaluates the influence of temperature in terms of its synergy with Ca(OH) 2 . The best conditions for the gasification process are achieved at 700 °C. The content of CO 2 was proven to be well absorbed, which is characterised by a decrease in the CO 2 content and an increase in H 2 in syngas. After the absorption process, the H 2 content obtained increased from 42.6 mole% to 48.8 mole% of H 2 at 700°C. The H 2 ratio also increased after absorption to 2.57 from the previous value of 2.23. The highest absorption efficiency of CO 2 by Ca(OH) 2 occurred at 700°C at 50.63%. With an increase in temperature in the gasification process with absorption, the CO 2 content decreased dramatically from 16.9 mole% to 3.9%. Ca(OH) 2 has good absorption power at CO 2 at high temperatures.
Ammonia is a harmful substance on wastewater if discharged to the river, then it must be treated well. This research was aimed to examine the potential for the type of bacteria Brevundimonas diminuta in the ammonia degradation process of wastewater. Earlier step was done to examine bacteria growth in synthetical medium of ammonia concentration ranged 5 – 25 ppm. It shows that the bacteria could grow well within that ranges. Then, the bacteria performances were examined to grow in wastewater sampled from Musi River containing ammonia ranged 1.9 – 2.94 mg/L in the airlift bioreactor. The wastewater used in bioreactor was 1 L. Air was injected into the bioreactor with variations in the air flow rate of 1.5 to 4.5 L/m and with varying observation times from 1.5 to 6 hours. The optimal decrease in ammonia levels has occurred when the air flow rate was 3 L/min for 6 hours and the ammonia level was reduced from 2.94 mg/L to 1.76 mg/L.
Setiap industri petrokimia memerlukan kebutuhan steam dan air sebagai unit penunjang prosesnya. Untuk meningkatkan efisiensi penggunaan air dalam sistem utilitas diperlukan cooling tower sehingga air pendingin dapat digunakan kembali selama proses berlangsung. Penggunaan cooling tower dalam industri dinilai penting, sehingga perlu peninjauan mengenai evaluasi kinerja cooling tower. Evaluasi kinerja cooling tower dilakukan berdasarkan perhitungan jumlah losses, neraca massa dan neraca panas, efisiensi termal, serta efisiensi kerja untuk mengetahui kondisi dan kinerja dari cooling tower dalam proses pendinginan. Hal ini dapat menjadi pertimbangan teknis pihak industri untuk operasional maupun perawatan lebih lanjut. Setelah melalui pengamatan di lapangan, diperoleh hasil perhitungan aktual yang menunjukkan efisiensi thermal cooling tower pada unit amoniak dan urea berkisar antara 74%-78,70%. dan masih sesuai dengan efisiensi termal secara desain sebesar 74 % dan 75,82 %. Sedangkan efisiensi kerja cooling tower unit amoniak maupun unit urea berdasarkan data aktualnya, yaitu berkisar 71,429%-83,537% dan sesuai dengan data desainnya yaitu 71,4 %. Berdasarkan hasil perhitungan tersebut, kinerja cooling tower masih beroperasi dengan baik dan masih layak digunakan dalam proses industri
B merupakan unit utama dalam proses pembuatan pupuk urea yang akan menentukan komponen dan kualitas pupuk urea. Synthesis Section memiliki tiga alat utama yaitu reaktor (DC-101), stripper (DA-101), dan carbamate condenser (EA-101). Stripper (DA-101) berperan dalam proses pemisahan excess amonia dari urea serta mendekomposisikan karbamat yang tidak terkonversi dari larutan sintesa urea. Proses pemisahan pada stripper disebut stripping. Dekomposisi karbamat pada alat stripper dapat mengakibatkan terjadinya reaksi samping dengan hasil berupa biuret berlebih akibat kondisi operasi yang tidak sesuai. Hal ini mengakibatkan perlunya pengontrolan kondisi operasi stripper agar terbentuknya biuret dapat diminimalisir. Pada penelitian ini dilakukan analisa kinerja stripper (DA-101) dari perbandingan data desain dan data aktual yang ditinjau dari persentase NH 3 stripping, efisiensi panas, dan kadar biuret. Data aktual pada penelitian ini diambil 5 pekan selama 1 bulan pada akhir tahun 2021. Dari hasil penelitian didapatkan persentase NH 3 stripping berturut-turut yaitu,
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.