A regenerator of a Stirling machine alternately absorbs and releases heat from and to the working fluid which allows to recycle rejected heat during theoretical isochoric processes. This work focuses on a milli-regenerator fabricated with a multiple jet molding process. The regenerator is a porous medium filled with a dense pillar matrix. The pillars have a geometrical lens shape. Two metallic layers (chromium and copper) are deposited on the polymer pillars to increase heat transfer inside the regenerator. We performed experiments on different milli-regenerators corresponding to three porosities (ε = 0.80, 0.85 and 0.90) under nitrogen steady and oscillating compressible flows (oscillating Reynolds number in the range 0 < Reω < 60 and Reynolds number based on the hydraulic diameter ReDh,max<6000) for different temperature gradients (ΔT < 100°C). Temperature, velocity and pressure experimental measurements are performed with microthermocouples (type K with 7,6 µm diameter), hotwires and miniature pressure sensors, respectively. We identified a threeterm composite correlation equation for the friction factor based on a Darcy-Forchheimer flow model that best-fit the experimental data. In steady and oscillating flows permeabilities and inertial coefficients are of the same magnitude order. Inertial coefficients decrease when the porosities increase.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.