Power system operators are in search of proven solutions to improve the penetration levels of distributed generators (DGs) in the grid while minimizing cost. This transition is driven, among others, by global climate concerns, the growing power demand, the need for greater flexibility, the ageing grid infrastructure and the need to diversify sources of energy production. Distributed renewables would not easily substitute the conventional electric grid system, perhaps because the latter is a well-established technology and it would not be prudent to abandon it, while the new distributed renewable energy technologies are generally not adequately developed to support the total load. Thus, it is becoming increasingly necessary to consider sustainable options such as integrating renewable energy sources into the existing power grid. This study is a review that is mainly hinged on distributed generation (DG) classification, the challenges of DG to grid integration, practical options used in DG integration, lessons learned from some countries with successful DG to grid integration, push factors in the growth of DGs and the merits of DG to grid integration. These standpoints of DG to grid interconnection are critical in conducting grid planning and operational studies, which should be conducted in strict observance of aspects such as optimal technology selection, optimal capacity and a suitable connection point of DGs in the network. Therefore, the perspectives highlighted regarding DG can assist power system engineers, developers of DG plants and policymakers in developing a power network that is stable, efficient and reliable.
Renewable energy solutions are appropriate for on-grid and off-grid applications, acting as a supporter for the utility network or rural locations without the need to develop or extend costly and difficult grid infrastructure. As a result, hybrid renewable energy sources have become a popular option for grid-connected or standalone systems. This paper examines hybrid renewable energy power production systems with a focus on energy sustainability, reliability due to irregularities, techno-economic feasibility, and being environmentally friendly. In attaining a reliable, clean, and cost-effective system, sizing optimal hybrid renewable energy sources (HRES) is a crucial challenge. The presenters went further to outline the best sizing approach that can be used in HRES, taking into consideration the key components, parameters, methods, and data. Moreover, the goal functions, constraints from design, system components, optimization software tools, and meta-heuristic algorithm methodologies were highlighted for the available studies in this timely synopsis of the state of the art. Additionally, current issues resulting from scaling HRES were also identified and discussed. The latest trends and advances in planning problems were thoroughly addressed. Finally, this paper provides suggestions for further research into the appropriate component sizing in HRES.
Access to inexpensive, clean energy is a key factor in a country’s ability to grow sustainably The production of electricity using fossil fuels contributes significantly to global warming and is becoming less and less profitable nowadays. This work therefore proposes to study the different possible scenarios for the replacement of light fuel oil (LFO) thermal power plants connected to the electrical network in northern Cameroon by renewable energy plants. Several scenarios such as the combination of solar photovoltaic (PV) with a pumped hydro storage system (PHSS), Wind and PHSS and PV-Wind-PHSS have been studied. The selected scenarios are evaluated based on two factors such as the system’s total cost (TC) and the loss of load probability (LOLP). To achieve the results, metaheuristics such the non-dominated sorting whale optimization algorithm (NSWOA) and non-dominated sorting genetic algorithm-II (NSGA-II) have been applied under MATLAB software. The optimal sizing of the components was done using hourly meteorological data and the hourly power generated by the thermal power plants connected to the electrical grid. Both algorithms provided satisfactory results. However, the total cost in the PV-PHSS, Wind-PHSS, and PV-Wind-PHSS scenarios with NSWOA is, respectively, 1%, 6%, and 0.2% lower than with NSGA-II. According to NSWOA results, the total cost for the PV-Wind-PHSS scenario at LOLP 0% is 4.6% and 17% less than the Wind-PHS and PV-PHSS scenarios, respectively. The profitability study of all three scenarios showed that the project is profitable regardless of the scenario considered.
The ubiquity of wireless sensor networks (WSN), as well as the rapid development of the Internet of Things (IoT), impel new approaches to reduce the energy consumption of the connected devices. The wake-up radio receivers (WuRx) were born in this context to reduce as much as possible the energy consumption of the radio communication part. This article aims at proposing a lowcost, high-efficiency rectifier to improve a quasi-passive WuRx performance in terms of communication range. By optimizing the wideband matching circuit and the proposed rectifier's load impedance, the sensitivity was increased by 5 dB, corresponding to an increase of the communication range (13 meters in free space). I.
Renewable energies are clean alternatives to the highly polluting fossil fuels that are still used in the power generation sector. The goal of this research was to look into replacing a Heavy Fuel Oil (HFO) thermal power plant in Limbe, southwest Cameroon, with a hybrid photovoltaic (PV) and wind power plant combined with a storage system. Lithium batteries and hydrogen associated with fuel cells make up this storage system. The total cost (TC) of the project over its lifetime was minimized in order to achieve the optimal sizing of the hybrid power plant components. To ensure the reliability of the new hybrid power plant, a criterion measuring the loss of power supply probability (LPSP) was implemented as a constraint. Moth Flame Optimization (MFO), Improved Grey Wolf Optimizer (I-GWO), Multi-Verse Optimizer (MVO), and African Vulture Optimization Algorithm (AVOA) were used to solve this single-objective optimization problem. The optimization techniques entailed the development of mathematical models of the components, with hourly weather data for the selected site and the output of the replaced thermal power plant serving as input data. All four algorithms produced acceptable and reasonably comparable results. However, in terms of proportion, the total cost obtained with the MFO algorithm was 0.32%, 0.40%, and 0.63% lower than the total costs obtained with the I-GWO, MVO, and AVOA algorithms, respectively. Finally, the effect of the type of storage coupled to the PV and wind systems on the overall project cost was assessed. The MFO meta-heuristic was used to compare the results for the PV–Wind–Hydrogen–Lithium Battery, PV–Wind–Hydrogen, and PV–Wind–Lithium Battery scenarios. The scenario of the PV–Wind–Hydrogen–Lithium Battery had the lowest total cost. This scenario’s total cost was 2.40% and 18% lower than the PV–Wind–Hydrogen and PV–Wind–Lithium Battery scenarios.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.