Acrylonitrile butadiene styrene (ABS), a petroleum-based thermoplastic, is widely used in various industry. It is important to make product costs without reducing the wear characteristics of products. For this reason, over the past 20 years, researchers have focused on improving product performance by reducing material weight. The literature has limited information about the tribological properties of the ABS polymer samples produced with fused deposition modelling. In this study, gyroid-patterned ABS samples with different infill densities (25%, 50%, and 75%) were produced and the effect on the wear properties of the samples was investigated. The main aim of the study is to show the infill density effect on wear and friction performance of the samples and find the coefficient of friction values. So, this study is one of the first studies which investigated wear and friction properties of ABS polymer produced as gyroid pattern with different infill densities. The study might also be used to have an initial information whether ABS polymer can be used in additive manufacturing systems for the joint components. As the performance indicator, diameter deviation, hardness, surface roughness, test temperature, friction coefficient, weight loss, and wearing surface results of the samples were evaluated. The results show that infill density is an important property that effect the tribological and heating characteristic of ABS samples. The friction and heat of the samples increase by increasing infill density. According to the tribological test results, the highest coefficient of friction and friction temperature were reached in the samples with 75% infill density.
Bu çalışmada 17-4 PH paslanmaz çelik malzemenin farklı koşullar altında, sürtünme/aşınma performansları incelenmiştir. Deneyler kuru, baz sıvı (bitkisel bazlı yağ) ve molibden de sülfür (MoS2) nanoakışkan koşulları altında gerçekleştirilmiştir. MoS2 nanoakışkanın çökelme veya topaklanmasının önüne geçme adına karışıma sodyum dodesil sülfat (SDS) yüzey aktif maddesi ilave edilmiştir. Sürtünme/aşınma deneylerinde bir pim-disk test cihazı kullanılmıştır. Deneylerde performans değerlendirilmesinde, sürtünme katsayısı, mikrosertlik, titreşim seviyesi, ortalama yüzey pürüzlülüğü (Ra) ve pim yüzey aşınması kullanılmıştır. Pim-disk deneyleri sonucu elde edilen verilere göre, MoS2 nanoakışkan koşulunun diğer koşullara göre daha iyi performans gösterdiği belirlenmiştir. MoS2 nanoakışkan koşulu kuru koşula göre sürtünme katsayısı, titreşim ortalaması, yüzey pürüzlülük Ra ve mikrosertlik değerlerini sırasıyla % 74,51, % 87,22, % 38,69 ve % 6,41 oranında azaltmıştır.
Son yıllarda, nanoakışkanlar üzerine yapılan çalışmaların ortaya çıkmasıyla, nanoteknolojik soğutma terimi kullanılmaya başlanmıştır. Nanoakışkanlar, içeriğinde bulunan ve çok düşük oranlarda (< hacimce %1) eklenen nanopartiküllerin yüksek termal iletkenliklerinden dolayı, ısı transfer özelliklerini önemli oranda arttırmaktadırlar. Nanoakışkanlar, yakıt hücreleri, hibrid motorlar, termal mıknatıslar gibi cihazlarda ve tornalama, frezeleme, metal işleme gibi geniş kullanım alanına sahiptirler. Grafit doğada bulunabildiği gibi kristal yapısındaki hareketli elektronlar yüzünden elektriği de iyi iletebilmektedir. Bu çalışmada; bitkisel esaslı yağ içerisine hacimce %0,25-0,50-0,75 ve 1,00 oranlarında, ortalama 80 nm boyutlarında nanografit tozları eklenmiştir. Nanoakışkan karışımlar mekanik karıştırıcı, ultrasonik homojenizatör ve manyetik karıştırıcıyla hazırlanmıştır. Farklı oranlarda hazırlanan nanoakışkanların viskozite ve termal iletkenlikleri incelenmiş ve bitkisel esaslı yağa eklenen grafit nanopartiküllerin termal davranışları ortaya konmuştur. Sonuç olarak baz bitkisel esaslı yağa eklenen farklı oranlardaki nano grafit partikülleri viskozite ve termal iletkenlikte artışa neden olmuştur, katkı oranlarının artmasıyla çok fazla bir artışın olmadığı görülmüştür.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.