ÖzYönetmeliklerin değişmesi, binaya yeni katların eklenmesi, binanın kullanım amacının değişmesi ve benzeri nedenlerden binalara onarım veya güçlendirme yapılması gerekebilir. Binaların güçlendirilmesi için birçok yöntem bulunmaktadır. Bunlardan bir tanesi çelik çapraz elemanlar kullanarak güçlendirme yapmaktır. Bu güçlendirme yönteminde, hangi tür çelik çaprazın kullanılacağı, çaprazların uygun yerleşiminin nasıl olacağı başlangıç aşamasında cevaplanması gereken önemli sorulardandır. Yapılan bu çalışmada, öncelikle üç açıklıklı (açıklık mesafesi eşit olup 4.5 m) ve dokuz katlı (kat yükseklikleri eşit ve 3m) betonarme çerçeve sistemin performans analizi yapılmıştır. Performans analizi sonucunda yapının güçlendirmeye ihtiyacı olduğu tespit edilmiştir. Ardından merkezi X çelik çaprazlar kullanılarak beş farklı yerleşim düzenine sahip güçlendirme modeli oluşturulmuştur. Bu sayede farklı yerleşim düzenine uygulanan çelik çaprazların binanın sismik davranışı üzerindeki etkisi belirlenmeye çalışılmıştır. Modellerin karşılaştırılmasında Doğrusal Olmayan Statik İtme Analizi ile yapılan performans değerlendirme sonuçları kullanılmıştır. Karşılaştırma sonucunda 2 açıklığa yapılan ve düşey süreksizliği olmayan çelik çapraz uygulamasının en uygun güçlendirme şekli olduğu belirlenmiştir.
Modern Frame Systems have appeared by development of frame systems due to search for optimum cost and quality of construction, along with the increased number of multi-storey concrete construction today. Although the initial investment costs of the modern frame systems are high, there use has increased 50100 times with respect to the traditional methods. With the modern frames, reduction or complete elimination of extra operations, such as cutting and sizing on site, have led to savings on workmanship and time. These systems aim at providing wide range of application in a short time by using minimum workmanship and, consequently, maximum number of application. This study explores, experimentally and numerically, the bending strength of wooden and plywood panels most frequently used for the construction today.
One of the common methods used as an alternative to shear walls in the retrofit of reinforced concrete (RC) structures is steel braces. The use of steel braces is preferred because of its rapid application as well as the increase in stiffness and strength. By using different types of braces in reinforced concrete frames, displacements can be reduced and properties such as structural performance, shear capacity, ductility, stiffness and strength can be increased. If the behavior characteristics of the hybrid system are known, the structural performance of the reinforced building can be predicted after the retrofit. In this study, the effect of different types of steel braces recommended in the Turkey Building Earthquake Code 2018 (TBEC-2018) on reinforced concrete building retrofit, was investigated. For this purpose, a 9-storey RC frame system was retrofitted using diagonal, X, inverted V, V and K type bracings. Considering the strength and stiffness results, an answer was searched for the question of which brace type had the best result in retrofit. The results obtained from the analyzes show that the X and K type bracings stand out in terms of strength and stiffness.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.