The demand for lightweight products to reduce CO2 emissions and high safety requirements is an increasing trend, especially in the vehicle and electrical appliance industry. The use of high-strength steels instead of conventional mild steels by using predictive modeling methods in finite element analysis plays a major role. Moreover, physical full-scale crash tests are time-consuming as well as expensive. Crash tolerance analysis in the finite element environment depends on the accuracy of the damage and the definition of the material model parameters. This study examines the damage model GISSMO-Generalized Increasing Stress State-induced damage model and the onset of fracture was calculated by sample optimization via finite element analysis in this study. This research presents the modeling of a specific region of the material fracture curve using the different geometric samples. The results of the numerical simulations are validated by comparing the experimental data of the optimized test samples with their measurements.
Lazer kaynak prosesinde uygulanan parametrelerin kaynaklanmış yassı çelik ürün performansı üzerindeki etkilerinin belirlenmesi önemlidir. Bu çalışmada, ağırlıklı olarak otomotiv sektörü tarafından kullanılan ve ülkemizde talebi ithalat ile karşılanmakta olan ileri nesil çift fazlı bir çelik kalitesine farklı lazer kaynak parametreleri uygulanmıştır. 3 kW’lık bir fiber lazer sistemi kullanılarak yassı çelik levhalar alın kaynak yöntemi ile birleştirilmiştir. Bu çelik kalitesi için uygun olabilecek kaynak parametre aralıklarının gözlemlenmesi amacıyla, farklı lazer kaynak parametrelerinin mikroyapı ve mekanik özellikler üzerindeki etkileri araştırılmıştır. Çekme testleri, mikrosertlik ölçümleri ve metalografik çalışmalar gerçekleştirilerek kaynak bölgeleri, ısı tesiri altındaki bölgeler ve esas metal incelenmiştir. Lazer kaynak denemelerinin ikisinde tam kaynak nüfuziyetinin ve esas metalden yüksek akma ve çekme mukavemetinin sağlandığı levha çiftleri üretilebilmiştir. Diğer deneylerde, mikroyapısal inceleme bulguları mekanik performans sonuçlarını güçlü destekler biçimde, sert faz miktarı ve iç yapıda tane inceliğinin gevrek kırılma olgusunu tetiklediği görülmüştür. Sonuçlar lazer kaynak proses parametreleri ile ilişkilendirilmiş, optimum prosese yönelik parametre aralığı izlenmiştir. Bununla birlikte, lazer gücü ve lazer ilerleme hızının ve böylece toplam ısı girdisinin iyi kalite kaynak eldesi için optimize edilmesi gereken kritik parametreler olduğu doğrulanmıştır.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.