No abstract

No abstract

SUMMARYA hybrid numerical-analytical solution based on the generalized integral transform technique is proposed to handle the two-dimensional Navier-Stokes equations in cylindrical coordinates, expressed in terms of the streamfunction-only formulation. The proposed methodology is illustrated in solving steady-state incompressible laminar flow of Newtonian fluids in the developing region of a circular tube. The flow modeling also considers two limiting inlet conditions, namely, uniform velocity profile representing a parallel flow, and zero vorticity that characterizes irrotational inlet flow. The integral transform analysis for such a full cylindrical region brings up singularities at the channel centerline, and, as previously described in a work dealing with the boundary-layer formulation, a way to alleviate this difficulty is to adopt a recently introduced fourth-order eigenvalue problem as the basis for the eigenfunction expansion. A thorough convergence analysis of the proposed expansion is then undertaken, for different values of Reynolds number, and a set of reference results for the velocity distributions and friction factors are then presented in tabular and graphical forms.

The mechanism of heat transfer intensification recently brought about by nanofluids is analyzed in this article, in the light of the non-Fourier dual-phase-lagging heat conduction model. The physical problem involves an annular geometry filled with a nanofluid, such as typically used for measurements of the thermal conductivity with Blackwell's line heat source probe. The mathematical formulation for this problem is analytically solved with the classical integral transform technique, thus providing benchmark results for the temperature predicted with the dual-phase-lagging model. Different test cases are examined in this work, involving nanofluids and probe sizes of practical interest. The effects of the relaxation times on the temperature at the surface of the probe are also examined. The results obtained with the dualphase-lagging model are critically compared to those obtained with the classical parabolic model, showing that the increase in the thermal conductivity of nanofluids measured with the line heat source probe cannot be attributed to hyperbolic effects.

No abstract

The thermal entry region in laminar forced convection of Herschel-Bulkley fluids is solved analytically through the integral transform technique, for both circular and parallel-plates ducts, which are maintained at a prescribed wall temperature or at a prescribed wall heat flux. The local Nusselt numbers are obtained with high accuracy in both developing and fully-developed thermal regions, and critical comparisons with previously reported numerical results are performed

No abstract

No abstract