Telah dilakukan pengujian karakteristk akustik dari material ampas tahu. Material tersebut merupakan material alternatif penyerap bunyi. Pengujian dilakukan dengan menggunakan metode tabung. Hasil pengujian menunjukkan bahwa material serat alam yang dicampur dengan lem memilki nilai koefisien absorbsi bunyi yang baik pada rentang frekuensi 1000-8000 Hz. Nilai koefisien absorbsi bunyi yang tinggi dimilki oleh material dengan pori-pori yang lebih besar (0,90 - 0,99). Selain koefisien absorbsi juga dilakukan pengujian nilai impedansi akustik. Hasilnya Menunjukkan bahwa perbandingan massa lem dengan ampas tahu diperoleh nilai impedansi yang baik (7,75 dan 8,33).
Penelitian ini dilakukan untuk menentukan karakteristik koefisien absorbsi bunyi dan impedansi akustik dari material berongga plafon polivinil klorida (PVC) yang bermerek Shunda Plafon dengan sisi tampang lintang rongga yaitu : 5, 6, 7, 8, dan 9 mm menggunakan metode tabung impedansi. Rentang frekuensi yang digunakan adalah 1000, 2000, 4000, 8000, dan 16000 Hz. Hasil penelitian menunjukan bahwa material Shunda Plafon dengan sisi tampang lintang rongga 5 mm sampai 9 mm dapat dikategorikan sebagai bahan penyerap bunyi yang cukup baik karena memiliki nilai koefisien absorbsi bunyi terendah lebih besar dari 0.15. Koefisien absorbsi bunyi dan impedansi tertinggi yaitu 0.84 dan 0,97 + i 0,07, terdapat pada material Shunda Plafon dengan sisi tampang lintang rongga 9 mm pada frekuensi 1000 Hz. Dengan demikian material akustik terbaik dari penelitian ini adalah Shunda Plafon dengan sisi tampang lintang rongga 9 mm. Namun penggunaan Shunda Plafon untuk penyerapan bunyi dapat disesuaikan dengan tingkat frekuensi kebisingan yang akan diserap. Shunda Plafon dengan sisi tampang lintang rongga 5 mm menunjukkan penyerapan bunyi yang cukup baik karena memiliki koefisien absorbsi bunyi besar dari 0.15.
Telah dilakukan penelitian tentang pengukuran koefisien absorbsi material akustik dari serat alam ampas tebu sebagai pengendali kebisingan. Metode yang digunakan yaitu metode tabung. Komposit berbahan dasar serat ampas tebu dengan matriks resin poliester–MEKPO. Komposit tersebut dibuat dengan massa serat berbeda dan massa resin poliester sama pada setiap sampel yaitu 60 g. Sampel 1 dengan massa serat 0,4 g, sampel 2 dengan massa serat 0,6 g, sampel 3 dengan massa serat 0,8 g, sampel 4 dengan massa serat 1 g dan sampel 5 dengan massa serat 1,2 g. Range frekuensi yang digunakan pada penelitian ini yaitu 500 Hz, 1000 Hz, 2000 Hz, 4000 Hz dan 8000 Hz. Hasil penelitian menunjukkan bahwa nilai koefisien absorbsi bunyi pada sampel ke 4 paling tinggi terjadi pada frekuensi 1000 Hz yakni 0,961 dan sampel ke 5 memiliki nilai koefisien absorbsi paling rendah pada frekuensi 500 Hz dengan nilai 0,363. Nilai impedansi akustik tertinggi terjadi pada sampel ke 4 yaitu pada frekuensi 8000 Hz dengan nilai 0,9774 dyne.s/cm5. Serat ampas tebu ini sangat cocok digunakan pada ruangan audio karena memiliki nilai koefisien absorbsi yang cukup tinggi pada frekuensi 1000 Hz.
Penelitian menentukan koefisien absorbsi bunyi dan impedansi akustik dari serat kayu Meranti Merah telah dilakukan. Sampel panel akustik dibuat dari serat kayu Meranti Merah dengan variasi lebar lembaran serat dan panjang serat. Lebar lembaran seratnya adalah antara 0,5 cm, 1 cm, 1,5 cm dan 2 cm dan panjang seratnya adalah 1 cm, 2 cm, 3 cm dan 4 cm. Pengukuran menggunakan frekuensi dari 500 Hz, 1000 Hz, 1500 Hz, 2000 Hz dan 2500 Hz. Nilai koefisien absorbsi bunyi tertinggi adalah 0,95±0,05 untuk frekuensi 1000 Hz dengan lebar dan panjang serat 0,5 cm dan 2 cm. Nilai impedansi akustik untuk koefisien absorbsi bunyi ini adalah 1,83 dyne.s/cm3. Dengan demikian berdasarkan koefisien absorbsi bunyi maka serat kayu Meranti Merah potensial untuk digunakan sebagai bahan penyerap bunyi. Nilai impedansi akustik secara umum memiliki hubungan yang kuat dengan koefisien absorbsi bunyi pada frekuensi 1000 Hz dengan R2 =0, 948Kata kunci : koefisien absorbsi bunyi, impedansi akustik, serat kayu Meranti Merah
Telah dilakukan penelitian untuk menentukan koefisien absorbsi bunyi dan impedansi akustik dari material ampas singkong dengan matriks lem PVC dengan menggunakan metode tabung. Sampel material akustik yang dibuat dari ampas singkong dengan variasi ketebalan 2 mm, 4 mm, 6 mm, 8 mm dan 10 mm. Pengukuran koefisien absorbs bunyi pada sampel menggunakan frekuensi 500 Hz, 1000 Hz, 1500 Hz, 2000 Hz dan 2500 Hz. Hasil penelitian ini menunjukkan nilai koefisien absorbsi bunyi tertinggi adalah 0,98 pada frekuensi 1500 Hz dengan ketebalan 10 mm dan nilai terendah adalah 0,64 pada frekuensi 2500 Hz dengan ketebalan 2 mm. Nilai impedansi akustik tertinggi adalah 2,78 pada frekuensi 1500 Hz dengan ketebalan 10 mm dan nilai terendah adalah 1,20 pada frekuensi 2500 Hz dengan ketebalan 2 mm. Dengan demikian ampas singkong potensial digunakan sebagai bahan penyerap bunyi berdasarkan ISO 11654 suatu material dapat dijadikan peredam suara jika material tersebut memiliki koefisien absorbsi bunyi minimum 0,15.Kata kunci: ampas singkong, frekuensi, impedansi akustik, koefisien absorbsi bunyi, metode tabung
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.