No abstract

An origami three-dimensional design of a paper-based potentiometric sensor is described. In its simplest form, this electrochemical paper-based analytical device (ePAD) is made from three small parts of the paper. Paper layers are folded on each other for the integration of a solid contact ion selective electrode (here a carbon-paste composite electrode) and a solid-state pseudo-reference electrode (here writing pencil 6B on the paper), which are in contact with a hydrophilic channel fabricated on the middle part (third part) of the paper. In this case, the pseudo-reference and working electrodes are connected to the two sides of the hydrophilic channel and hence the distance between them is as low as the width of paper. The unmodified carbon paste electrode (UCPE) and modification with the crown ether benzo15-crown-5 (B15C5) represented a very high sensitivity to Cu (II) and Cd2+ ions, respectively. The sensor responded to H2O2 using MnO2-doped carbon paste electrode (CPE). Furthermore, a biosensor was achieved by the addition of glucose oxidase to the MnO2-doped CPE and hence made it selective to glucose with ultra-sensitivity. In addition to very high sensitivity, our device benefits from consuming a very low volume of sample (10.0 µL) and automatic sampling without need for sampling devices.

No abstract

No abstract

No abstract

A new, simple and low‐cost method for patterning hydrophobic barriers in porous support such as paper by Parafilm® has been introduced. This method is then used for electrochemical paper‐based ammonia sensor construction. Ammonia sensor is based on electrochemical concentration cell which ammonia reaction with electrolyte in halves cell caused in concentration gradient and therefore potential difference dependent on ammonia concentration. The effect of concentrations of the involved chemicals, time periods of the required processes, the presence of Faraday cage as well as the effects of different salts used in the salt bridge on the response of the sensor, were investigated in order to find the optimized conditions.

No abstract

No abstract