MXenes, most commonly transition metal carbides, are a family of two-dimensional (2D) materials with promising potential in, among other applications, supercapacitors and batteries. MXenes are synthesized by etching of aluminum or gallium layers in its parent MAX phase directly by HF or by HF in situ formation using a fluoride salt and strong acid. A commonly undesired byproduct of MXene synthesis is AlF3·3H2O. To relieve MXenes from AlF3·3H2O impurity, it is important to elucidate the factors that drive its formation. Here, we dually deduce the conditions that lead to AlF3·3H2O formation while exploring etching with cobalt fluorides (CoF2/CoF3). Previously uncharacterized, etching with cobalt fluorides offers a forthright method to etch MXenes while intercalating cobalt cations. The influence of this etching environment and AlF3·3H2O formation on MXene’s structure, morphology, and surface bonding is investigated. Ionic strength of solution used for etching is found to be a critical driving factor in the formation of AlF3·3H2O impurity formation. Specifically, when the ionic strength falls between ∼8.5 and 10 M, AlF3 complexation is stable. As a result, Ti3C2T x MXene phase with AlF3·3H2O impurity is obtained. In contrast, near-pure MXene is the only solid state product when I is smaller than 8.5 M or larger than 10 M. Hence, high purity MXene phase can be synthesized by subtle compositional tuning to manipulate the ionic strength of the etching environment.

Nanoparticle synthesis with silylamine reversible ionic liquids (RevILs) has been previously demonstrated to offer unique alternatives to traditional nanoparticle syntheses, allowing for size control and facile deposition onto support surfaces via the switchable nature of the IL. However, the mechanism of nanoparticle synthesis remains uncharacterized. The use of RevILs facilitates the synthesis of size-controlled nanoparticles without the use of additional stabilizing agents (i.e., surfactants, ligands, and polymers) that passivate the nanoparticle surface, which are traditionally required to control the nanoparticle size. Traditional techniques often require harsh activation steps that ultimately impact nanoparticle size and morphology. While RevIL syntheses offer an excellent alternative, as they do not require additional activation steps, the mechanism through which nanoparticles are synthesized in these systems has not been studied previously. Preceding work hypothesized nanoparticles prepared with RevILs are formed via a reverse micelle mechanism, in which nanoparticles are stabilized and templated within the aqueous core of the organized micelle structures. In this work, DOSY-NMR is used to demonstrate that nanoparticles synthesized with 3-aminopropyltriethylsilane RevIL are not formed through a reverse micelle mechanism but rather a switchable aggregation mechanism that affords control over the nanoparticle size via manipulation of the RevIL structure and concentration. Furthermore, it is shown that the addition of water to RevIL systems has detrimental effects on the aggregation behavior of the ionic liquid molecules in solution, causing disassembly of the ion pairs. However, because nanoparticle reduction likely occurs faster than the disassembly of the ion pairs, nanoparticle size is unaffected by the addition of water during nanoparticle reduction.

MXenes are ultra-thin two-dimensional layered early transition-metal carbides and nitrides with potential applications in various emerging technologies, such as energy storage, water purification, and catalysis. MXenes are synthesized from the parent MAX phases with different etching agents [hydrofluoric acid (HF) or fluoride salts with a strong acid] by selectively removing a more weakly bound crystalline layer of Al or Ga replaced by surface groups (−O, −F, −OH, etc.). Ti3C2T x MXene synthesized by CoF2/HCl etching has layered heterogeneity due to intercalated Al3+ and Co2+ that act as pillars for interlayer spacings. This study investigates the impacts of etching environments on the compositional, interfacial, structural, and thermodynamic properties of Ti3C2T x MXenes. Specifically, compared with HF/HCl etching, CoF2/HCl treatment leads to a Ti3C2T x MXene with a broader distribution of interlayer distances, increased number of intercalated cations, and decreased degree of hydration. Moreover, we determine the enthalpies of formation at 25 °C (ΔH f,25°C) of Ti3C2T x MXenes etched with CoF2/HCl, ΔH f,25°C = −1891.7 ± 35.7 kJ/mol Ti3C2, and etched with HF/HCl, ΔH f,25°C = −1978.2 ± 35.7 kJ/mol Ti3C2, using high-temperature oxidation drop calorimetry. These energetic data are discussed and compared with experimentally derived and computationally predicted values to elucidate the effects of intercalants and surface groups of MXenes. We find that MXenes with intercalated metal cations have a less exothermic ΔH f,25°C from an increase in the interlayer space and dimension heterogeneity and a decrease in the degree of hydration leading to reduced layer–layer van der Waals interactions and weakened hydration effects applied on the MXene layers. The outcomes of this study further our understanding of MXene’s energetic–structural–interfacial property relationships.

Silica-encapsulated gold core@shell nanoparticles (Au@SiO2 CSNPs) were synthesized via a tunable bottom-up procedure to catalyze the aerobic oxidation of benzyl alcohol. The nanoparticles exhibit a mesoporous shell which enhances selectivity...

No abstract

MXenes are ultra-thin two-dimensional layered early-transition metal carbides and nitrides with potential applications in various emerging technologies, such as energy storage, water purification, and catalysis. MXenes are synthesized from the parent MAX phase with different etching agents (HF or fluoride salts with a strong acid) by selectively removing a more weakly bound crystalline layer of Al or Ga replaced by surface groups (-O, -F, -OH, etc.). Ti3C2Tx MXene synthesized by CoF2/HCl etching has layered heterogeneity due to intercalated Al3+ and Co2+ that act as pillars for interlayer spacings. This study investigates the impacts of etching environments on the compositional, interfacial, structural, and thermodynamic properties of Ti3C2Tx MXenes. Specifically, compared with HF/HCl etching, CoF2/HCl treatment leads to a Ti3C2Tx MXene with a broader distribution of interlayer distances, increased number of intercalated cations, and decreased degree of hydration. Moreover, we determine the enthalpies of formation at 25 °C (ΔHf,25°C) of Ti3C2Tx MXenes etched with CoF2/HCl, ΔHf,25°C = –1891.7 ± 35.7 kJ/mol Ti3C2, and etched with HF/HCl, ΔHf,25°C = –1978.2 ± 35.7 kJ/mol Ti3C2, using high-temperature oxidation drop calorimetry. These energetic data are discussed and compared with experimentally derived and computationally predicted values to elucidate the effects of intercalants and surface groups of MXenes. We find that MXenes with intercalated metal cations has a less exothermic ΔHf,25°C from an increase in the interlayer space and dimension heterogeneity and a decrease in the degree of hydration leading to reduced layer–layer van der Waals interactions and weakened hydration effects applied on the MXene layers. The outcomes of this study further our understanding of MXene’s energetic–structure–interfacial property relationships.

No abstract