No abstract

The present study reports on a simple preparation strategy of a hybrid catalyst, TiO2/HKUST-1, containing TiO2 anatase nanoparticles (NPs) with tailored morphology and photocatalytic activity coupled with a porous metal-organic framework (MOF), namely HKUST-1, as an advanced material for the CO2 photocatalytic reduction. In detail, TiO2/HKUST-1 catalyst was prepared via an easy slow-diffusion method combined with a step-by-step self-assembly at room temperature. The growth of crystalline HKUST-1 onto titania surface was achieved by functionalizing TiO2 nanocrystals, with phosphoesanoic acid (PHA), namely TiO2-PHA, which provides an intimate contact between MOF and TiO2. The presence of a crystalline and porous shell of HKUST-1 on the TiO2 surfaces was assessed by a combination of analytical and spectroscopic techniques. TiO2/HKUST-1 nanocomposite showed a significant efficiency in reducing CO2 to CH4 under solar light irradiation, much higher than those of the single components. The role of MOF to improve the photoreduction process under visible light was evidenced and attributed either to the relevant amount of CO2 captured into the HKUST-1 porous architecture or to the hybrid structure of the material, which affords enhanced visible light absorption and allows an effective electron injection from TiO2-PHA to HKUST-1, responsible for the photochemical reduction of CO2.

The efficient production of energy from low-temperature heat sources (below 100°C) would open the doors to the exploitation of a huge amount of heat sources such as solar, geothermal, and industrial waste heat. Thermal regenerable redoxflow batteries (TRBs) are flow batteries that store energy in concentration cells that can be recharged by distillation at temperature < 100°C, exploiting low-temperature heat sources. Using a single membrane cell setup and a suitable redox couple (LiBr/Br 2), a TRB has been developed that is able to store a maximum volumetric energy of 25.5 Wh dm À 3 , which can be delivered at a power density of 8 W m À 2. After discharging 30 % of the volumetric energy, a total heat-to-electrical energy conversion efficiency of 4 % is calculated, the highest value reported so far in harvesting of low-temperature heat.