We present a systematic algorithm capable of searching for optimal colors for any lightness L * (between 0 and 100), any illuminant (D65, F2, F7, F11, etc.), and any light source reported by CIE. Color solids are graphed in some color spaces (CIELAB, SVF, DIN99d, and CIECAM02) by horizontal (constant lightness) and transversal (constant hue angle) sections. Color solids plotted in DIN99d and CIECAM02 color spaces look more spherical or homogeneous than the ones plotted in CIELAB and SVF color spaces. Depending on the spectrum of the light source or illuminant, the shape of its color solid and its content (variety of distinguishable colors, with or without color correspondence) change drastically, particularly with sources whose spectrum is discontinuous and/or very peaked, with correlated color temperature lower than 5500 K. This could be used to propose an absolute colorimetric quality index for light sources comparing the volumes of their gamuts, in a uniform color space.
A reduced set of measurement geometries allows the spectral reflectance of special effect coatings to be predicted for any other geometry. A physical model based on flake-related parameters has been used to determine nonredundant measurement geometries for the complete description of the spectral bidirectional reflectance distribution function (BRDF). The analysis of experimental spectral BRDF was carried out by means of principal component analysis. From this analysis, a set of nine measurement geometries was proposed to characterize special effect coatings. It was shown that, for two different special effect coatings, these geometries provide a good prediction of their complete color shift.
Please cite this article as: P. Sanmartín, E. Chorro, D. Vázquez-Nion, F.M. Martínez-Verdú, B. Prieto, Conversion of a digital camera into a non-contact colorimeter for use in stone cultural heritage: the application case to Spanish granites, Measurement (2014), doi: http://dx.doi.org/10. 1016/j.measurement.2014.06.023 This is a PDF file of an unedited manuscript that has been accepted for publication. As a service to our customers we are providing this early version of the manuscript. The manuscript will undergo copyediting, typesetting, and review of the resulting proof before it is published in its final form. Please note that during the production process errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain. In this study, a digital CMOS camera was calibrated for use as a non-contact 2 colorimeter for measuring the color of granite artworks. The low chroma values of the 3 granite, which yield similar stimulation of the three color channels of the camera, 4 proved to be the most challenging aspect of the task. The appropriate parameters for 5 converting the device-dependent RGB color space into a device-independent color 6 space were established. For this purpose, the color of a large number of Munsell 7 samples (corresponding to the previously defined color gamut of granite) was measured 8 with a digital camera and with a spectrophotomer (reference instrument). The color data 9 Conversion of a digital camera into a nonwere then compared using the CIELAB color formulae. The best correlations between 10 measurements were obtained when the camera works to 10-bits and the 11 spectrophotometric measures in SCI mode. Finally, the calibrated instrument was used 12 successfully to measure the color of six commercial varieties of Spanish granite. 13 14
A representation of the color gamut of special effect coatings is proposed and shown for six different samples, whose colors were calculated from spectral bidirectional reflectance distribution function (BRDF) measurements at different geometries. The most important characteristic of the proposed representation is that it allows a straightforward understanding of the color shift to be done both in terms of conventional irradiation and viewing angles and in terms of flake-based parameters. A different line was proposed to assess the color shift of special effect coatings on a*,b*-diagrams: the absorption line. Similar to interference and aspecular lines (constant aspecular and irradiation angles, respectively), an absorption line is the locus of calculated color coordinates from measurement geometries with a fixed bistatic angle. The advantages of using the absorption lines to characterize the contributions to the spectral BRDF of the scattering at the absorption pigments and the reflection at interference pigments for different geometries are shown.
Purpose: To report visual, refractive, and corneal aberrations after implantation of a new asymmetric intracorneal ring segment (ICRS). Methods: This was a prospective, multicenter clinical study including 30 eyes of 26 patients with keratoconus. All cases were implanted with an ICRS, named the VISUMRING (VR), which had an arc length of 353 degrees and 2 asymmetric sections that can be customized in base width, length, and thickness. Ophthalmic evaluation included uncorrected distance visual acuity (UDVA), corrected distance visual acuity (CDVA), refraction, topography, and anterior corneal aberrations using the Sirius System (CSO, Firenze, Italy). Mean follow-up period was 14.7 ± 7.9 months. Results: Significant improvement of both UDVA and CDVA was observed after 1 year. UDVA improved from 0.08 ± 0.22 to 0.22 ± 0.16 and CDVA from 0.24 ± 0.29 to 0.43 ± 0.18 (P = 0.01). A significant reduction of more than 7 D in the spherical equivalent from −12.38 ± 3.77 D to −5.00 ± 3.26 D (P < 0.05) was noted 1 year after the procedure. In terms of higher-order aberrations, a slight reduction that was not statistically significant in the higher-order and coma-like aberrations was noted at 1 year from 4.32 and 3.82, to 4.12 and 3.55, respectively. Regarding complications, 5 of the 30 cases needed to have the VR explanted throughout the follow-up period due to severe corneal melting. Conclusions: VR ICRS improves vision and refraction and induces major corneal flattening in patients with keratoconus. Further design enhancement is needed to increase the reduction of the asymmetric corneal aberrations and reduce the extrusion rate.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.