Industrial districts are characterized by the presence of low and extensive building volumes and by predominantly sealed, impermeable surfaces, which contribute to several environmental problems and to the deterioration of outdoor human thermal comfort conditions, especially during summer hot days. To tackle these issues, this study proposes an approach for the regeneration of industrial districts based on the application of cool materials. Reflective and evaporative pavements were selected as suitable solutions to reduce summer overheating, while ensuring the functionality required by the industrial production, and contributing to stormwater management. The effectiveness of the approach was tested in a portion of the industrial district of Padua (Italy). In summer conditions, the replacement of conventional pavements with cool materials results in a reduction of the ground surface temperatures up to 14.0 °C and a consequent decrease of the air temperature at pedestrian level between 0.6 and 1.2 °C. The effects of human thermal comfort conditions highly depend on the selected cool material and on the morphology of the urban canyon. Finally, the reduction of external surface and air temperatures also contributes in cooling indoor spaces (average decrease from 1.0 to 2.5 °C), with impacts on the energy efficiency of the industrial buildings.

Background. The approach to diagnosing, treating and monitoring severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection relies strongly on laboratory resources, with serological testing representing the mainstay for studying the onset, nature and persistence of humoral immune response. This study was aimed at evaluating the analytical performance of the novel Beckman Coulter anti-SARS-CoV-2 IgG chemiluminescent immunoassay. Methods. This analytical assessment encompassed the calculation of intra-assay, inter-assay and total imprecision, linearity, limit of blank (LOB), limit of detection (LOD), functional sensitivity, and comparison of anti-SARS-CoV-2 antibodies values obtained on paired serum samples using DiaSorin Liaison SARS-CoV-2 S1/S2 IgG and Roche Elecsys Anti-SARS-CoV-2 total antibodies. Diagnostic performance was also tested against results of molecular testing on nasopharyngeal swabs, collected over the previous 4 months. Results. Intra-assay, inter-assay and total imprecision of Beckman Coulter anti-SARS-CoV-2 IgG were between 4.3-4.8%, 2.3-3.9% and 4.9-6.2%, respectively. The linearity of the assay was excellent between 0.11-18.8 antibody titers. The LOB, LOD and functional sensitivity were 0.02, 0.02 and 0.05, respectively. The diagnostic accuracy (area under the curve; AUC) of Beckman Coulter anti-SARS-CoV-2 IgG compared to molecular testing was 0.87 (95% CI, 0.84-0.91; p<0.001) using manufacturer's cut-off, and increased to 0.90 (95% CI, 0.86-0.94; p<0.001) with antibody titers. The AUC was non-significantly different from that of Roche Elecsys Anti-SARS-CoV-2, but was always higher than that of DiaSorin Liaison SARS-CoV-2 S1/S2 IgG. The correlation of Beckman Coulter Access SARS-CoV-2 IgG was 0.80 (95% CI, 0.75-0.84; p<0.001) with Roche Elecsys Anti-SARS-CoV-2 and 0.72 (95% CI, 0.66-0.77; p<0.001) with DiaSorin Liaison SARS-CoV-2 S1/S2 IgG, respectively. Conclusions. The results of this analytical evaluation of Beckman Coulter Access anti-SARS-CoV-2 IgG suggests that this fully-automated chemiluminescent immunoassay represents a valuable resource for large and accurate seroprevalence surveys.

No abstract