CdTe is a very robust and chemically stable material and for this reason its related solar cell thin film photovoltaic technology is now the only thin film technology in the first 10 top producers in the world. CdTe has an optimum band gap for the Schockley-Queisser limit and could deliver very high efficiencies as single junction device of more than 32%, with an open circuit voltage of 1 V and a short circuit current density exceeding 30 mA/cm2. CdTe solar cells were introduced at the beginning of the 70s and they have been studied and implemented particularly in the last 30 years. The strong improvement in efficiency in the last 5 years was obtained by a new redesign of the CdTe solar cell device reaching a single solar cell efficiency of 22.1% and a module efficiency of 19%. In this paper we describe the fabrication process following the history of the solar cell as it was developed in the early years up to the latest development and changes. Moreover the paper also presents future possible alternative absorbers and discusses the only apparently controversial environmental impacts of this fantastic technology.
Over the last 20 years, the technological improvements of CdTe solar cell have been impressive, and today the performance of these cells is comparable with that of silicon cells. Behind these important results, there have been important research efforts, aimed at exploring every single aspect related to CdTe cell optimization. One of these is reliability, that is fundamental in the perspective of massive commercialization. The aim of this review paper is to explore the main aspects related to the operation and reliability of CdTe solar cells, and describe the most relevant results presented in the literature on these topics. The paper is divided in two parts. The first is dedicated to a general introduction of CdTe issues. In this part, we report the most relevant details on CdTe solar cells from a reliability perspective, including (a) a description of the CdTe solar cells development on the years, (b) a description of the main production methods, (c) an overview of the main mathematical model to describe a solar cell, and (d) the main normative requirements related to solar cell reliability. The second section describes the most important papers in the field of CdTe solar cell reliability, along with two recent case studies, that can be used as an example to understand the complexity of the involved processes. The results are critically discussed by considering the most recent literature on the topic, to provide a general overview to the reader willing to approach the topic.
Abstract:Thin film solar cells have reached commercial maturity and extraordinarily high efficiency that make them competitive even with the cheaper Chinese crystalline silicon modules. However, some issues (connected with presence of toxic and/or rare elements) are still limiting their market diffusion. For this reason new thin film materials, such as Cu 2 ZnSnS 4 or SnS, have been introduced so that expensive In and Te, and toxic elements Se and Cd, are substituted, respectively, in CuInGaSe 2 and CdTe. To overcome the abundance limitation of Te and In, in recent times new thin film materials, such as Cu 2 ZnSnS 4 or SnS, have been investigated. In this paper we analyze the limitations of SnS deposition in terms of reproducibility and reliability. SnS deposited by thermal evaporation is analyzed by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, and atomic force microscopy. The raw material is also analyzed and a different composition is observed according to the different number of evaporation (runs). The sulfur loss represents one of the major challenges of SnS solar cell technology.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.