a b s t r a c tMany aspects of bronze production during Late Bronze Age in Western Europe are so far unknown. In the present study selected artefact fragments and metallurgical debris, which include a slag fragment, from the emblematic Late Bronze Age habitat site of Castro da Senhora da Guia de Baiões (Viseu, Portugal) have been studied by optical microscopy, micro-EDXRF, SEM-EDS and XRD. Evidences were found for bronze production involving smelting and recycling. Compositional analysis showed that the artefacts are made of a bronze with 13 AE 3 wt.% Sn (average and one standard deviation) and a low impurity pattern, namely <0.1 wt.% Pb, being comparable with the composition of other bronzes from the same region (the Central Portuguese Beiras). This alloy is generally different from elsewhere Atlantic and Mediterranean bronzes, which show frequently slightly lower Sn contents and higher impurity patterns, namely Pb which is often present as an alloying element. The present study gives further support to early proposals suggesting the exploration of the Western Iberian tin resources during Late Bronze Age, and besides that, it indicates that metalworking and smelting could have been a commonplace activity requiring no specific facilities, being bronze produced at a domestic scale in this Western extreme of Europe.

No abstract

No abstract

A combination of analytical techniques capable of elemental and microstructural characterisation was used for the identification of ancient gilding technology and bronze metallurgy. EDXRF, micro-EDXRF, SEM-EDS analysis and metallographic examinations were applied in the study of artefacts dating to the end of the second millennium BC from Crasto de São Romão in Central Portugal. Results report to the finding of an exceptional gilded copper nail among bronze artefacts with 9 wt.% to15 wt.% tin and minute other metallic impurities. Additionally, analysis of a crucible fragment points out for bronze production at the archaeological site. EDXRF and micro-EDXRF analysis made on the copper nail showed that it was gilded only on the front side of the head, and that the gold layer has been lost in the most exposed areas. SEM-EDS analysis showed that the gold layer has 5-8 µm in thickness and is covered with a thick corrosion layer. The gilding technique is discussed based on the gold layer composition and gold/copper substrate interface. So far, this object seems to be the first diffusion gilded artefact identified in the Portuguese territory dated to Late Bronze Age.

Studies concerning European Proto-historic metallic artefacts can provide important clues about technological transfers during a period of time characterised by diverse cultural interactions. A collection of Proto-historic metallic artefacts from Medronhal (western Iberian Peninsula) composed by rings, bracelets and a fibula related to different cultural affiliations were investigated by micro-EDXRF to provide a major and a minor elemental characterisation. Results show that the Medronhal collection was manufactured in a Cu-Sn alloy (binary bronze) with similar Sn contents among the various types of artefacts and a low impurity pattern. Results of the type and quality of metal were compared to other artefact collections to infer about metallurgical parallels. Strong parallels with indigenous Late Bronze Age Iberian metallurgical productions were found.

A diachronic view of the metallurgy in the Portuguese territory during the first three millennia after its appearance in the Iberian Peninsula is presented based on the current state of the art. Results of micro‐energy dispersive X‐ray fluorescence (micro‐EDXRF) analyses made on metal artefacts to determine their composition and scanning electron microscopy with energy dispersive analysis (SEM‐EDS) analyses to study microstructural features as inclusions are shown to illustrate trends and specificities of each chronological period. Generally, in early periods, namely during the Copper Age and first stages of the Bronze Age, unalloyed copper and arsenical copper were at use, and only by the Late Bronze Age (LBA) did tin bronze substitute almost completely the previous role of copper. In the Early Iron Age, during the Orientalising period, a general decrease in the average tin content in bronzes seems to happen. Regarding the inclusions observed in the metal matrix, these seem to suffer a diversification with the appearance of tin bronzes. By the Copper Age, only CuO and CuAsO inclusions are observed, while by the LBA CuS inclusions become regular, besides others less frequent, as SnO, CuSFe and Pb globules. Overall, with the present analytical study, the complementary character of micro‐EDXRF and SEM‐EDS in the study of ancient metals is demonstrated, providing a first general overview of the ancient metallurgy at the Portuguese territory which is of key importance to specific investigations of the future. Copyright © 2011 John Wiley & Sons, Ltd.

a b s t r a c tIn the present study six exceptional large size metallic nails, a dagger and a sickle from the Late Bronze Age archaeological site of Figueiredo das Donas (Central Portugal) have been analysed by EDXRF, micro-EDXRF and X-ray digital radiography for the study of material composition and technology of fabrication. The combination of these analytical and examination techniques showed that all artefacts are made of bronze with As, Sb and Pb impurities, and that the nails were most likely manufactured using the casting-on technique. These results reinforce the use of binary bronze by Late Bronze Age in the region, and the incorporation of new fabrication technologies that resulted from ancient spheres of interaction.

Studies on cultural metal artifacts can benefit greatly from microscopy techniques. The examination of microstructural features can provide relevant information about ancient manufacturing techniques, as well as about corrosion/degradation processes. In the present work, advantages of the use of multifocus imaging techniques in optical microscopy for the study of archaeological metals are presented. An archaeometallurgical study of a large collection of bronzes demonstrates the possibility of a microstructural study with no need for sample removal, which is a great advantage in the study of cultural objects. In addition, the study of mounted samples illustrates the advantages of the multifocus technique in the examination of particular corrosion features, with the possibility of three-dimensional reconstructions.