A preocupação ambiental tem gerado interesse na pesquisa de novos materiais que estejam alinhados com os princípios da sustentabilidade. Entre esses materiais, atualmente, encontramse os compósitos produzidos a partir de recursos de fontes renováveis. Este artigo apresenta os resultados de um estudo de caso acerca de produtos em que são empregados os referidos compósitos. Realizou-se uma pesquisa na rede mundial de computadores usando a ferramenta de buscas google sobre produtos fabricados com esses compósitos e comparou-se com produtos fabricados a partir de materiais usualmente utilizados na indústria, tais como polímeros, metais e cerâmicas. Constatou-se que os compósitos feitos a partir de fontes renováveis estão sendo, principalmente, aplicados em embalagens, na produção de ferramentas para jardinagem e vasos para plantas. Dessa forma, observou-se que os referidos compósitos podem substituir materiais comumente empregados na indústria atendendo aos requisitos funcionais e estéticos demandados na confecção desses produtos.Palavras-chave: Compósitos. Materiais de fontes renováveis. Design de produto.
This study aimed to analyze the waterproofing MDF with different coatings. For this, a comparative study was conducted with the following coatings on MDF: Vegetable polyurethane resin on castor oil-based, acrylic lacquer and marine varnish. To carry out the research, sewed up the samples in sequence, they received the coatings, and then we performed the test water absorption. As a result, the polyurethane resin to castor oil-based coating was presented the best results, that is, lower levels of water absorption lower thickness swelling and volume. Finally, it is believed that the study of waterproofing MDF plant originated from polyurethane castor oil is beneficial because it is a renewable source of material.
Concerns for the environment are recurrent in our society, and research on low impact materials such as those produced from waste is an alternative. This work is based on the reuse of scrap paper and rice hulls aiming to increase the life cycle of these waste products and to find better destination. Composites with a volumetric filler content (dispersed phase) of 80% were produced via compression molding using polyurethane (PU) based on castor oil or polyester resin as matrix, in four distinct families: polyester/rice hulls, PU/rice hulls, polyester/paper and PU/paper. The following tests were performed: water sorption, contact angle, hardness, impact and tensile testing. Scanning electron microscopy (SEM) was used for fracture morphology study. Basic visual analysis showed greater void content for the rice hull composites, making them less aesthetically appealing compared to paper. It was observed in the case of PU matrix the filler greatly influenced the rigidity since this pure material was more flexible compared to pure polyester. Filler incorporation decreased tensile strength of the polyester matrix but significantly increased that of the PU matrix.
Aspectos que influenciam a seleção de materiais no processo de design Resumo: Os materiais possuem características que os tornam únicos, assim, é preciso analisá-las para selecionar o material mais adequado para determinado produto. Este trabalho objetiva verificar os aspectos dos materiais que influenciam a seleção dos materiais sob o ponto de vista de designers de produto. Através de entrevistas e análise de conteúdo, o estudo revelou que nas etapas iniciais do processo de design, os designers direcionam a seleção de materiais para os aspectos intangíveis e nas etapas posteriores para os tangíveis. Palavras-chave: design de produto, processo de design, seleção de materiais.
ResumoExistem materiais que podem causar menos danos ambientais, como os biodegradáveis, por possuírem a vantagem de degradarem-se em um curto período de tempo. Sendo assim, o objetivo do presente trabalho é discutir o ciclo de vida dos compósitos biodegradáveis e sua relação com o impacto ambiental na produção destes materiais. A partir de pesquisa bibliográfica, constatou-se que no desenvolvimento dos compósitos biodegradáveis são utilizados materiais de fontes renováveis, aditivos e tratamentos que visam conservar a propriedade de biodegradação, além disso, são empregados métodos convencionais de processamento que devido aos materiais naturais utilizados, diminuem os danos nos equipamentos. Dessa forma, o ciclo de vida dos compósitos biodegradáveis direciona-se para o baixo impacto ambiental.Palavras-chave: sustentabilidade, ciclo de vida, compósitos biodegradáveis, biodegradação, impacto ambiental. AbstractThere are materials that cause less environmental damage, such as biodegradable, so they have the advantage that they degrade in a short
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.